The variable initiates reset operation in
agent software, ie. warm start. write reset(1)
to any one of UPS MIB array, will result in
the same reset operation.
Parsed from file mg-ups.mib.txt
Company: None
Module: MG-SNMP-UPS-MIB
The variable initiates reset operation in
agent software, ie. warm start. write reset(1)
to any one of UPS MIB array, will result in
the same reset operation.
Parsed from file MG-SNMP-UPS-MIB.mib
Module: MG-SNMP-UPS-MIB
Vendor: Merlin Gerin
Module: MG-SNMP-UPS-MIB
[Automatically extracted from oidview.com]
upsmgAgentReset OBJECT-TYPE SYNTAX INTEGER { reset (1), nothing(2) } ACCESS read-write STATUS mandatory DESCRIPTION " The variable initiates reset operation in agent software, ie. warm start. write reset(1) to any one of UPS MIB array, will result in the same reset operation." ::= { upsmgAgent 9}
upsmgAgentReset OBJECT-TYPE SYNTAX INTEGER { reset (1), nothing(2) } ACCESS read-write STATUS mandatory DESCRIPTION " The variable initiates reset operation in agent software, ie. warm start. write reset(1) to any one of UPS MIB array, will result in the same reset operation." ::= { upsmgAgent 9}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.705.1.12.9.0 | upsAgentReset | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.705.1.12.1 | upsmgAgentIpaddress, upsAgentIpaddress | 1 | 1 | The ip address that NMS can identify the managed device |
| 1.3.6.1.4.1.705.1.12.2 | upsmgAgentSubnetMask, upsAgentSubnetMask | 1 | 1 | Internet address subnet mask |
| 1.3.6.1.4.1.705.1.12.3 | upsmgAgentDefGateway, upsAgentDefGateway | 1 | 1 | The default gateway that allow device managed through routers |
| 1.3.6.1.4.1.705.1.12.4 | upsmgAgentBaudRate, upsAgentBaudRate | 1 | 1 | the serial port communication speed. only 2400, 4800, and 9600 allowed |
| 1.3.6.1.4.1.705.1.12.5 | upsmgAgentPollRate, upsAgentPollRate | 1 | 1 | The frequency that proxy agent polls the connected UPS in ASCII protocol. (unit : second) |
| 1.3.6.1.4.1.705.1.12.6 | upsmgAgentType, upsAgentType | 1 | 1 | The type of agent. |
| 1.3.6.1.4.1.705.1.12.7 | upsmgAgentTrapAlarmDelay, upsAgentTrapAlarmDelay | 1 | 1 | The interval for the Trap packet retransmission, while the TRAP Acknowledge is implemented and the ack is received within the int… |
| 1.3.6.1.4.1.705.1.12.8 | upsmgAgentTrapAlarmRetry, upsAgentTrapAlarmRetry | 1 | 1 | The retry count for retransmitting Trap packet while the TRAP acknowledge is implemented. |
| 1.3.6.1.4.1.705.1.12.10 | upsmgAgentFactReset, upsAgentFactReset | 1 | 1 | The variable initiates reset operation in agent software, ie. warm start, and load default data (Factory setting) to EEPROM and to… |
| 1.3.6.1.4.1.705.1.12.11 | upsmgAgentMibVersion, upsAgentMibVersion | 1 | 1 | The version of the MIB implemented in agent. |
| 1.3.6.1.4.1.705.1.12.12 | upsmgAgentFirmwareVersion, upsAgentFirmwareVersion | 1 | 1 | The agent firmware version. |
| 1.3.6.1.4.1.705.1.12.13 | upsmgAgentCommUPS, upsAgentCommUPS | 1 | 1 | The status of communication between agent and ups. Even value means no communication, and odd value means a certain level of comm… |
| 1.3.6.1.4.1.705.1.12.14 | upsmgAgentTrapAck, upsAgentTrapAck | 1 | 1 | The last Trap number that has been received by UM-View. |
| 1.3.6.1.4.1.705.1.12.15 | upsmgAgentAutoLearning, upsAgentAutoLearning | 1 | 1 | The enabled/disabled configuration of the Auto Learning process of the agent, default value is yes(1) e.g. enabled. |
| 1.3.6.1.4.1.705.1.12.16 | upsmgAgentBootP, upsAgentBootP | 1 | 1 | The enabled/disabled configuration of the BootP process, default value is yes(1) e.g. enabled. |
| 1.3.6.1.4.1.705.1.12.17 | upsmgAgentTFTP, upsAgentTFTP | 1 | 1 | The enabled/disabled configuration of the TFTP process, default value is no(2) e.g. disabled. |
| 1.3.6.1.4.1.705.1.12.18 | upsmgAgentTrapSignature | 1 | 1 | The signature of the trap acknowledged by a manager. |