An entry in ADB table.
Parsed from file BREEZECOM-MIB.mib
Module: BREEZECOM-MIB
Vendor: Lannair Ltd.
Module: BREEZECOM-MIB
[Automatically extracted from oidview.com]
adbEntry OBJECT-TYPE SYNTAX AdbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in ADB table." INDEX { stAddress } ::= { adbTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.1 | stAddress | 0 | 0 | The MAC Address of the station represented by this entry in the Association Data Base |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.4 | stCFMode | 0 | 0 | This attribute is set to ON if the station is in the Contention Free Polling list of the AP. |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.5 | stMaxRate | 0 | 0 | This attribute indicates the maximum rate (in Mbits per second) at which that station transmits data across the Wireless medium. |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.6 | stCurTxRate | 0 | 0 | The rate currently used by the AP to transmit packets to this station |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.7 | stRssi | 0 | 0 | A value representing the average Signal Strength for packets received from that station in RSSI units. This attribute is being up… |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.8 | stPMMode | 0 | 0 | The current Power Management mode of this station Power saving mode enables WLAN units (such as laptops or hand-held devices) to … |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.9 | stTxFragments | 0 | 0 | This attribute counts the total number of fragments (including retransmissions), that were transmitted to that station over the W… |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.10 | stTxFragments1M | 0 | 0 | This attribute counts the total number of fragments (including retransmissions), that were transmitted to that station over the W… |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.11 | stTxFragments2M | 0 | 0 | This attribute counts the total number of fragments (including retransmissions), that were transmitted to that station over the W… |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.12 | stTxFragments3M | 0 | 0 | This attribute counts the total number of fragments (including retransmissions), that were transmitted to that station over the W… |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.13 | stTxRetry | 0 | 0 | This attribute counts the total number of retransmissions to that station, over the Wireless LAN. It is updated only if sysColle… |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.14 | stTxDroppedPackets | 0 | 0 | This attribute counts the number of transmit frames (data or management) to this station, that were dropped because of too many r… |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.15 | stRxFragments | 0 | 0 | This attribute counts the total number of fragments (data and management) that have been received successfully from that station,… |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.16 | stWlanStatus | 0 | 0 | This attribute specifies the current reception quality of frames, transmitted by that station. |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.17 | stResetCounters | 0 | 0 | Setting the value of this attribute to ON, will clear the station counters at the AP (clear the counters in that adbEntry). Warni… |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.18 | stType | 0 | 0 | This attribute identifies the device type of the station. |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.19 | stTxRetryPercent | 0 | 0 | This attribute calculate the retransmitted percentage, that was retransmitted to that station over the Wireless LAN. |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.20 | stReTxFragments1M | 0 | 0 | This attribute counts the total number of fragments, that was retransmitted to that station over the Wireless LAN in 1Mbps. It is … |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.21 | stReTxFragments2M | 0 | 0 | This attribute counts the total number of fragments, that was retransmitted to that station over the Wireless LAN in 2Mbps. It is … |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.22 | stReTxFragments3M | 0 | 0 | This attribute counts the total number of fragments, that was retransmitted to that station over the Wireless LAN in 2Mbps. It is … |
| 1.3.6.1.4.1.710.3.2.3.2.2.1.1.23 | stDbm | 0 | 0 | A value representing the average Signal Strength for packets received from that station in DBM units. This attribute is being upd… |