Administratively desired higher level protocol stack
to support on this port.
Administratively desired higher level protocol stack
to support on this port.
Parsed from file LS2020-R2-MIB.my.txt
Company: None
Module: LIGHTSTREAM-MIB
Administratively desired higher level protocol stack
to support on this port.
Parsed from file LIGHTSTREAM-MIB.mib
Module: LIGHTSTREAM-MIB
ls1InfoAdminProtocol OBJECT-TYPE SYNTAX INTEGER { trunk (1), frameRelay (2), frameForwarding (3), ppp (4), unknown (5) } ACCESS read-write STATUS mandatory DESCRIPTION "Administratively desired higher level protocol stack to support on this port." ::= { ls1InfoEntry 16 }
Vendor: Cisco Systems
Module: LIGHTSTREAM-MIB (LS2020-R2-MIB.my)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
ls1InfoAdminProtocol OBJECT-TYPE SYNTAX INTEGER { trunk (1), frameRelay (2), frameForwarding (3), ppp (4), unknown (5) } ACCESS read-write STATUS mandatory DESCRIPTION "Administratively desired higher level protocol stack to support on this port." ::= { ls1InfoEntry 16 }
ls1InfoAdminProtocol OBJECT-TYPE SYNTAX INTEGER { trunk (1), frameRelay (2), frameForwarding (3), ppp (4), unknown (5) } ACCESS read-write STATUS mandatory DESCRIPTION "Administratively desired higher level protocol stack to support on this port." ::= { ls1InfoEntry 16 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.711.2.1.4.1.1.1 | ls1InfoIfIndex | 0 | 0 | This is the ifIndex value of the corresponding ifEntry. See comments above. |
1.3.6.1.4.1.711.2.1.4.1.1.2 | ls1InfoType | 0 | 0 | Level 1 interface type used for this port |
1.3.6.1.4.1.711.2.1.4.1.1.3 | ls1InfoOperCsuType | 0 | 0 | Identifier of operational CSU Interface |
1.3.6.1.4.1.711.2.1.4.1.1.4 | ls1InfoAdminCsuType | 0 | 0 | Identifier of administartively specified CSU Interface |
1.3.6.1.4.1.711.2.1.4.1.1.5 | ls1InfoOperRcvBaudRate | 0 | 0 | Operation receive baud rate |
1.3.6.1.4.1.711.2.1.4.1.1.6 | ls1InfoAdminRcvBaudRate | 0 | 0 | Adminsitratively desired receive baud rate |
1.3.6.1.4.1.711.2.1.4.1.1.7 | ls1InfoOperXmitBaudRate | 0 | 0 | Operation transmit baud rate. |
1.3.6.1.4.1.711.2.1.4.1.1.8 | ls1InfoAdminXmitBaudRate | 0 | 0 | Admistratively desired transmission baud rate |
1.3.6.1.4.1.711.2.1.4.1.1.9 | ls1InfoOperNetIntType | 0 | 0 | Operational network Interface Type for this port: DCE, DTE, or DCE with local tt loopback. This last option provides the ability… |
1.3.6.1.4.1.711.2.1.4.1.1.10 | ls1InfoAdminNetIntType | 0 | 0 | Administrative or desired Network Interface Type for DCE, DTE, or DCE with local tt loopback. This last option provides the abil… |
1.3.6.1.4.1.711.2.1.4.1.1.13 | ls1InfoOperModemState | 0 | 0 | Operational Status of certain modem signals. A bitmask which gives the current state of certain modmem signals is returned. If … |
1.3.6.1.4.1.711.2.1.4.1.1.15 | ls1InfoOperProtocol | 0 | 0 | Operational higher level protocol stack to support on this port. |
1.3.6.1.4.1.711.2.1.4.1.1.21 | ls1InfoOperControlBandwidthSize | 0 | 0 | The current operation value of the control bandwidth size for this port. This is a scaling factor. This value is multiplied by … |
1.3.6.1.4.1.711.2.1.4.1.1.22 | ls1InfoAdminControlBandwidthSize | 0 | 0 | The current administratively desired value of the control bandwidth size for this port. Setting the trigger variable ls1InfoAdimO… |
1.3.6.1.4.1.711.2.1.4.1.1.23 | ls1InfoOperDataBandwidthSize | 0 | 0 | The current operation value of the data bandwidth size for this port. This is a scaling factor. This value is multiplied by ls1… |
1.3.6.1.4.1.711.2.1.4.1.1.24 | ls1InfoAdminDataBandwidthSize | 0 | 0 | The current administratively desired value of the data bandwidth size for this port. Setting the trigger variable ls1InfoAdimOper… |
1.3.6.1.4.1.711.2.1.4.1.1.25 | ls1InfoOperLoopMode | 0 | 0 | Operational loop mode for this port: none, internal, external, or remote |
1.3.6.1.4.1.711.2.1.4.1.1.26 | ls1InfoAdminLoopMode | 0 | 0 | Administrative or desired loop mode for this port: none, internal, external, or remote |
1.3.6.1.4.1.711.2.1.4.1.1.27 | ls1InfoLcAutoEnable | 0 | 0 | State of the LC auto-enable flag for this port. If enabled the port will be enable at LC boot time. If disabled the port will re… |
1.3.6.1.4.1.711.2.1.4.1.1.28 | ls1InfoLcDebugLevel | 0 | 0 | Value of the LC debug level variable for this port. This parameter is set in the LC EEPROM by portctl. |
1.3.6.1.4.1.711.2.1.4.1.1.29 | ls1InfoDataCellCapacity | 0 | 0 | The portion of this port's capacity in cells that is allocated for data traffic. |
1.3.6.1.4.1.711.2.1.4.1.1.30 | ls1InfoDataCellAvailable | 0 | 0 | The portion of this port's capacity in cells that is available for data traffic. This variable is adjusted for the bandwidth con… |
1.3.6.1.4.1.711.2.1.4.1.1.31 | ls1InfoMeasuredBaudRate | 0 | 0 | This is the line rate as measured from the line card. |
1.3.6.1.4.1.711.2.1.4.1.1.32 | ls1InfoLinkUtilization | 0 | 0 | This is an estimated utilization on the link. |
1.3.6.1.4.1.711.2.1.4.1.1.99 | ls1InfoAdminOperTrigger | 0 | 0 | When proper commands written to this variable the LCC attempts to change the state of the port such that the oper status reflects… |