This parameter determines the type of ring, dial tone,
ringback tone and busy tone that will be generated by the
NetVoice card. To ensure that these signals are generated
according to local standards, set this parameter to the
country where the NetVoice is located.
Parsed from file act.mib.txt
Company: None
Module: PRESTICOM7-MIB
This parameter determines the type of ring, dial tone,
ringback tone and busy tone that will be generated by the
NetVoice card. To ensure that these signals are generated
according to local standards, set this parameter to the
country where the NetVoice is located.
Parsed from file CLEARTRAC7-MIB.mib
Module: CLEARTRAC7-MIB
Vendor: Verso Technologies Canada Inc. (previously was 'Presticom Inc.')
Module: CLEARTRAC7-MIB
[Automatically extracted from oidview.com]
sysCountry OBJECT-TYPE SYNTAX INTEGER (0..9999) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter determines the type of ring, dial tone, ringback tone and busy tone that will be generated by the NetVoice card. To ensure that these signals are generated according to local standards, set this parameter to the country where the NetVoice is located." ::= { system 38 }
sysCountry OBJECT-TYPE SYNTAX INTEGER (0..9999) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter determines the type of ring, dial tone, ringback tone and busy tone that will be generated by the NetVoice card. To ensure that these signals are generated according to local standards, set this parameter to the country where the NetVoice is located." ::= { system 38 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.727.7.2.1.1 | sysDesc | 0 | 0 | This variable contains a printable octet string which contains the full name and version of the product. |
| 1.3.6.1.4.1.727.7.2.1.2 | sysContact | 0 | 0 | The textual identification of the contact person for this managed node, together with information on how to contact this person. |
| 1.3.6.1.4.1.727.7.2.1.3 | sysName | 0 | 0 | An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. |
| 1.3.6.1.4.1.727.7.2.1.4 | sysLocation | 0 | 0 | The physical location of this node (e.g., `telephone closet, 3rd floor'). |
| 1.3.6.1.4.1.727.7.2.1.5 | sysDate | 0 | 0 | The current date. |
| 1.3.6.1.4.1.727.7.2.1.6 | sysClock | 0 | 0 | The current time. |
| 1.3.6.1.4.1.727.7.2.1.7 | sysDay | 0 | 0 | The current day. |
| 1.3.6.1.4.1.727.7.2.1.8 | sysAcceptLoop | 0 | 0 | Control of loopback on the WAN links. This parameter determines whether loopback on any link is accepted (YES) or not accepted (… |
| 1.3.6.1.4.1.727.7.2.1.9 | sysLinkTimeout-s | 0 | 0 | The delay, in seconds, before a WAN link is declared down during a link failure. This timeout can be used to prevent the accumul… |
| 1.3.6.1.4.1.727.7.2.1.10 | sysTransitDelay-s | 0 | 0 | The maximum delay, in seconds, allowed to elapse between the reception and transmission of a forwarded frame by a bridge. a time… |
| 1.3.6.1.4.1.727.7.2.1.11 | sysDefaultIpAddr | 0 | 0 | Default IP address for the unit. This address is used for PVCR ports and PVCs that do not have a configures IP address (set with… |
| 1.3.6.1.4.1.727.7.2.1.12 | sysDefaultIpMask | 0 | 0 | Default IP subnet mask associated with the default IP address. It is configured like the default IP address: a 4-byte value in do… |
| 1.3.6.1.4.1.727.7.2.1.13 | sysDefaultGateway | 0 | 0 | This is the gateways IP address to use when a destination is unknown. At this time, well transmit all frame with unknown desti… |
| 1.3.6.1.4.1.727.7.2.1.15 | sysRackId | 0 | 0 | ID of the Rack this board is plugged in |
| 1.3.6.1.4.1.727.7.2.1.16 | sysPsAndFansMonitoring | 0 | 0 | The monitoring functionality of the Power Supplies and Fans. |
| 1.3.6.1.4.1.727.7.2.1.17 | sysSnmpTrapIpAddr1 | 0 | 0 | Specific IP address to sent SNMP trap. |
| 1.3.6.1.4.1.727.7.2.1.18 | sysSnmpTrapIpAddr2 | 0 | 0 | Specific IP address to sent SNMP trap. |
| 1.3.6.1.4.1.727.7.2.1.19 | sysSnmpTrapIpAddr3 | 0 | 0 | Specific IP address to sent SNMP trap. |
| 1.3.6.1.4.1.727.7.2.1.20 | sysSnmpTrapIpAddr4 | 0 | 0 | Specific IP address to sent SNMP trap. |
| 1.3.6.1.4.1.727.7.2.1.21 | sysUnitRoutingVersion | 0 | 0 | Unit Routing Version: The routing version to be used on this unit. Select 1 if any cleartrac7 units in the network are running Un… |
| 1.3.6.1.4.1.727.7.2.1.30 | sysThisPosId | 0 | 0 | ID of this board's position |
| 1.3.6.1.4.1.727.7.2.1.31 | sysPosNr | 0 | 0 | The number of positions in the Rack this board belongs to (Always 8, hardware characteristic) |
| 1.3.6.1.4.1.727.7.2.1.32 | sysPosTable | 1 | 5 | This table represents the entire rack this board belongs to. The number of entries is sysPosNr |
| 1.3.6.1.4.1.727.7.2.1.33 | sysRacksNr | 0 | 0 | The total number of populated Racks in the system (1 to 4 racks) |
| 1.3.6.1.4.1.727.7.2.1.34 | sysDLCI | 0 | 0 | The local DLCI address used as Srce field in the connection request to an FP |
| 1.3.6.1.4.1.727.7.2.1.35 | sysExtensionNumLength | 0 | 0 | The number of digits that must be used to define a port Extension Number, or a Destination Extension Number in the Voice Mapping… |
| 1.3.6.1.4.1.727.7.2.1.36 | sysExtendedDigitsLength | 0 | 0 | This parameter sets the number of digits that must be entered into the telephone set when the Extension Number Source of a Voice… |
| 1.3.6.1.4.1.727.7.2.1.37 | sysDialTimer | 0 | 0 | This parameter specifies the amount of time the system should wait for a response to a Call Connect or Call Clear requests. |
| 1.3.6.1.4.1.727.7.2.1.39 | sysJitterBuf | 0 | 0 | The amount of jitter delay, in milliseconds, that the unit voice uses to compensate for the variable arrival time of packets. |
| 1.3.6.1.4.1.727.7.2.1.40 | sysRingFreq | 0 | 0 | the frequency in hertz, at which a ring is generated on locally attached equipment |
| 1.3.6.1.4.1.727.7.2.1.41 | sysRingVolt | 0 | 0 | the voltage, in volts rms, at which a ring is generated on locally attached equipment. |
| 1.3.6.1.4.1.727.7.2.1.42 | sysVoiceEncoding | 0 | 0 | SN-7800 and RX only... |
| 1.3.6.1.4.1.727.7.2.1.43 | sysVoiceClocking | 0 | 0 | SN-7800 and RX only... |
| 1.3.6.1.4.1.727.7.2.1.44 | sysVoiceLog | 0 | 0 | Enable logs (accounting) on voice/fax ports |
| 1.3.6.1.4.1.727.7.2.1.45 | sysSpeedDialNumLength | 0 | 0 | Number of digit of the MAP numbers |
| 1.3.6.1.4.1.727.7.2.1.46 | sysAutoSaveDelay | 0 | 0 | Number of seconds left after a modification and before saving in flash (0 : no auto save) |
| 1.3.6.1.4.1.727.7.2.1.47 | sysPsMonitoring | 0 | 0 | The monitoring functionality of the Power Supplies and Fans. |
| 1.3.6.1.4.1.727.7.2.1.48 | sysVoiceHighestPriority | 0 | 0 | When set to yes, the voice traffic has unconditionnaly the highest possible priority. When set to no, the voice priority is spec… |
| 1.3.6.1.4.1.727.7.2.1.49 | sysVoiceClass | 0 | 0 | Associate the voice traffic to a class priority. Effective only if sysVoiceHighestPriority is set to no |
| 1.3.6.1.4.1.727.7.2.1.50 | sysHuntForwardingAUnit | 0 | 0 | Hunt forwarding group A Unit name. Unit name where a busy call for hunt group A will be forwarded to |
| 1.3.6.1.4.1.727.7.2.1.51 | sysHuntForwardingBUnit | 0 | 0 | Hunt forwarding group B Unit name. Unit name where a busy call for hunt group B will be forwarded to |
| 1.3.6.1.4.1.727.7.2.1.52 | sysHuntForwardingADLCI | 0 | 0 | Hunt forwarding group A DLCI address. DLCI address where a busy call for hunt group A will be forwarded on an FP PVC |
| 1.3.6.1.4.1.727.7.2.1.53 | sysHuntForwardingBDLCI | 0 | 0 | Hunt forwarding group B DLCI address. DLCI address where a busy call for hunt group B will be forwarded on an FP PVC |
| 1.3.6.1.4.1.727.7.2.1.54 | sysHuntForwardingASvcAddress | 0 | 0 | Hunt forwarding group A SVC address. SVC address where a busy call for hunt group A will be forwarded on an FP SVC. NOTE: sysHunt… |
| 1.3.6.1.4.1.727.7.2.1.55 | sysHuntForwardingBSvcAddress | 0 | 0 | Hunt forwarding group A SVC address. SVC address where a busy call for hunt group A will be forwarded on an FP SVC. NOTE: sysHunt… |
| 1.3.6.1.4.1.727.7.2.1.56 | sysBackplaneRipVersion | 0 | 0 | When this parameter is set to V1, the RIP routing is done according to the RIP V1 standard. With RIP V2, broadcast or multicast … |
| 1.3.6.1.4.1.727.7.2.1.57 | sysTrapRackandPos | 0 | 0 | Rack ID X 10 + Position ID. |