The total number of octets processed through the segment.
Octets counted are the number of data and padding octets in
frames that are successfully received. The approximate
minimum time for counter rollover is 58 minutes.
Parsed from file ncr-mib.txt
Company: None
Module: RH-ATT-MIB
The total number of octets processed through the segment.
Octets counted are the number of data and padding octets in
frames that are successfully received. The approximate
minimum time for counter rollover is 58 minutes.
Parsed from file RH-ATT-MIB.mib
Module: RH-ATT-MIB
Vendor: AT&T
Module: RH-ATT-MIB
[Automatically extracted from oidview.com]
rh1PerfMonSegTotalOctetsProcessedOk OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets processed through the segment. Octets counted are the number of data and padding octets in frames that are successfully received. The approximate minimum time for counter rollover is 58 minutes." ::= { rh1PerfMonSegmentEntry 7 }
rh1PerfMonSegTotalOctetsProcessedOk OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets processed through the segment. Octets counted are the number of data and padding octets in frames that are successfully received. The approximate minimum time for counter rollover is 58 minutes." ::= { rh1PerfMonSegmentEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.74.2.14.3.1.1.1 | rh1PerfMonSegmentID | 0 | 0 | Index by segment into the Performance Monitor table. This value available even if there are no cards on the segment. |
| 1.3.6.1.4.1.74.2.14.3.1.1.2 | rh1PerfMonSegFrameSize1Bound | 0 | 0 | The upper boundary for the first quantization band (the lower bound is 64 by definition). This boundary applies to both rh1PerfM… |
| 1.3.6.1.4.1.74.2.14.3.1.1.3 | rh1PerfMonSegFrameSize2Bound | 0 | 0 | The upper boundary for the second quantization band. This boundary applies to both rh1PerfMonSegTotalBand2Frames and rh1PerfMonSe… |
| 1.3.6.1.4.1.74.2.14.3.1.1.4 | rh1PerfMonSegFrameSize3Bound | 0 | 0 | The upper boundary for the third quantization band. This boundary applies to both rh1PerfMonSegTotalBand3Frames and rh1PerfMonSeg… |
| 1.3.6.1.4.1.74.2.14.3.1.1.5 | rh1PerfMonSegFrameSize4Bound | 0 | 0 | The upper boundary for the fourth quantization band (and the lower bound for the fifth quantization band). This boundary applies … |
| 1.3.6.1.4.1.74.2.14.3.1.1.6 | rh1PerfMonSegTotalFramesProcessedOk | 0 | 0 | The number of valid frames processed through the segment. It does not include frames received with frame-too-long, FCS, length, o… |
| 1.3.6.1.4.1.74.2.14.3.1.1.8 | rh1PerfMonSegTotalCollisions | 0 | 0 | The total number of times the transmit collision state is entered, no matter how many ports are involved. The counter is not incr… |
| 1.3.6.1.4.1.74.2.14.3.1.1.9 | rh1PerfMonSegTotalLateCollisions | 0 | 0 | Counts the number of times that a collision has been detected on this port later than 512 bit times into the transmitted packet. … |
| 1.3.6.1.4.1.74.2.14.3.1.1.10 | rh1PerfMonSegTotalRunts | 0 | 0 | Counts the number of collision fragments longer than 96 bits and shorter than a legal packet, detected on this segment. (Runts do… |
| 1.3.6.1.4.1.74.2.14.3.1.1.11 | rh1PerfMonSegTotalShortEvents | 0 | 0 | Counts the number of fragments received on this segment. These fragments, less than 96-n bits long, indicate an external noise hi… |
| 1.3.6.1.4.1.74.2.14.3.1.1.12 | rh1PerfMonSegTotalFrameTooLongs | 0 | 0 | Counts the number of frames received through this segment that are greater than 1518 bytes long. |
| 1.3.6.1.4.1.74.2.14.3.1.1.13 | rh1PerfMonSegTotalAutoPartitions | 0 | 0 | The total number of times ports on this segment (in this chassis) have been autopartitioned. |
| 1.3.6.1.4.1.74.2.14.3.1.1.14 | rh1PerfMonSegTotalLongFragments | 0 | 0 | The total number of fragments received by this segment. LongFragments are any frames greater or equal to 96 bits but less than 51… |
| 1.3.6.1.4.1.74.2.14.3.1.1.15 | rh1PerfMonSegTotalFifoErrors | 0 | 0 | Counts the total number of times that a packet has been received by this segment with the transmission frequency (data rate) dete… |
| 1.3.6.1.4.1.74.2.14.3.1.1.16 | rh1PerfMonSegTotalErrorEnergy | 0 | 0 | The total length in bytes of all error energy. Used to calculate network utilization. Errors included in this counter are: late … |
| 1.3.6.1.4.1.74.2.14.3.1.1.17 | rh1PerfMonSegTotalNondataEnergy | 0 | 0 | The total length in bytes of all non-data energy. Used to calculate network utilization. Non-data is defined as: collisions, run… |
| 1.3.6.1.4.1.74.2.14.3.1.1.18 | rh1PerfMonSegTotalManchesterViolations | 0 | 0 | The number of manchester code violations. |
| 1.3.6.1.4.1.74.2.14.3.1.1.19 | rh1PerfMonSegTotalBand1Frames | 0 | 0 | The number of frames transmitted from this segment summarized into packet size bands. The sizes are with respect to LLC data. |
| 1.3.6.1.4.1.74.2.14.3.1.1.20 | rh1PerfMonSegTotalBand2Frames | 0 | 0 | The number of frames transmitted from this segment summarized into packet size bands. The sizes are with respect to LLC data. |
| 1.3.6.1.4.1.74.2.14.3.1.1.21 | rh1PerfMonSegTotalBand3Frames | 0 | 0 | The number of frames transmitted from this segment summarized into packet size bands. The sizes are with respect to LLC data. |
| 1.3.6.1.4.1.74.2.14.3.1.1.22 | rh1PerfMonSegTotalBand4Frames | 0 | 0 | The number of frames transmitted from this segment summarized into packet size bands. The sizes are with respect to LLC data. |
| 1.3.6.1.4.1.74.2.14.3.1.1.23 | rh1PerfMonSegTotalBand5Frames | 0 | 0 | The number of frames transmitted from this segment summarized into packet size bands. The sizes are with respect to LLC data. |
| 1.3.6.1.4.1.74.2.14.3.1.1.24 | rh1PerfMonSegCounts | 0 | 0 | This object aggregates selected stats into one coded bit string. The definition of each position in the string is: Statistics co… |