Indicates whether the auto-revert property of the interface is set.
If the value is 'true', the interface will automatically revert back to the home port
whenever the interface is not on the home port and the home port becomes operational.
Parsed from file netapp_2_2_2.mib.txt
Company: netapp
Module: NETAPP-MIB
Vendor: Network Appliance
Module: NETAPP-MIB (netapp_2_2_2.mib)
Type: TABULAR
Access: read-only
Syntax: Boolean
Automatically extracted from www.mibdepot.com
logicalInterfaceAutoRevert OBJECT-TYPE SYNTAX Boolean MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the auto-revert property of the interface is set. If the value is 'true', the interface will automatically revert back to the home port whenever the interface is not on the home port and the home port becomes operational." ::= { logicalInterfaceEntry 18 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.789.1.22.4.1.1 | logicalInterfaceServer | 0 | 0 | The node where the logical interface belongs to. |
| 1.3.6.1.4.1.789.1.22.4.1.2 | logicalInterfaceVif | 0 | 0 | The name of the logical interface. |
| 1.3.6.1.4.1.789.1.22.4.1.3 | logicalInterfaceRole | 0 | 0 | The role of logical interface. An interface can have one of the following roles: undef(0), cluster(1), data(2), mgmt(3), intercl… |
| 1.3.6.1.4.1.789.1.22.4.1.4 | logicalInterfaceHomeNode | 0 | 0 | The home node of the interface where the interface is initially setup. |
| 1.3.6.1.4.1.789.1.22.4.1.5 | logicalInterfaceHomePort | 0 | 0 | The home port of the interface where the interface is initially setup. |
| 1.3.6.1.4.1.789.1.22.4.1.6 | logicalInterfaceCurrNode | 0 | 0 | The node where the interface is currently on. |
| 1.3.6.1.4.1.789.1.22.4.1.7 | logicalInterfaceCurrPort | 0 | 0 | The port where the interface is currently attached to. |
| 1.3.6.1.4.1.789.1.22.4.1.8 | logicalInterfaceStatusOper | 0 | 0 | The operational status, which can be UP(0) or DOWN(1). |
| 1.3.6.1.4.1.789.1.22.4.1.9 | logicalInterfaceNumericId | 0 | 0 | The interface ID. |
| 1.3.6.1.4.1.789.1.22.4.1.10 | logicalInterfaceIsHome | 0 | 0 | Indicates whether the interface is at the home node. |
| 1.3.6.1.4.1.789.1.22.4.1.11 | logicalInterfaceAddress | 0 | 0 | The IP address assigned to the interface. |
| 1.3.6.1.4.1.789.1.22.4.1.12 | logicalInterfaceNetmask | 0 | 0 | The netmask assigned to the interface. |
| 1.3.6.1.4.1.789.1.22.4.1.13 | logicalInterfaceNetmaskLength | 0 | 0 | The number of set bits of the netmask. |
| 1.3.6.1.4.1.789.1.22.4.1.14 | logicalInterfaceRoutingGroup | 0 | 0 | The interface's routing group name |
| 1.3.6.1.4.1.789.1.22.4.1.15 | logicalInterfaceStatusAdmin | 0 | 0 | The status of the interface assigned by an administrator. It can be either UP(0) or DOWN(1). |
| 1.3.6.1.4.1.789.1.22.4.1.16 | logicalInterfaceFailoverPolicy | 0 | 0 | The interface's failover policy. It can be next-available(0), where the interface will failover to any next available interface, … |
| 1.3.6.1.4.1.789.1.22.4.1.17 | logicalInterfaceFirewallPolicy | 0 | 0 | The firewall policy of the interface. |
| 1.3.6.1.4.1.789.1.22.4.1.19 | logicalInterfaceSticky | 0 | 0 | Indicates whethere the sticky bit is set. It is the readonly field that is set by the system. When it is set, the interface's au… |
| 1.3.6.1.4.1.789.1.22.4.1.20 | logicalInterfaceUseFailoverGroup | 0 | 0 | The field identifies whether the interface's failover is system-defined(0), set to 'enabled'(1) or 'disable'(2). |
| 1.3.6.1.4.1.789.1.22.4.1.21 | logicalInterfaceDnsZone | 0 | 0 | The interface's DNS Zone |
| 1.3.6.1.4.1.789.1.22.4.1.22 | logicalInterfaceAllowLbMigrate | 0 | 0 | Indicates whether the load balancing migration is enabled for the interface. |
| 1.3.6.1.4.1.789.1.22.4.1.23 | logicalInterfaceLbWeight | 0 | 0 | The load balancing weight of the interface. It can be either minimum (0), maximum(100), or load(101). |
| 1.3.6.1.4.1.789.1.22.4.1.24 | logicalInterfaceFailoverGroup | 0 | 0 | The interface failover group's name. |
| 1.3.6.1.4.1.789.1.22.4.1.25 | logicalInterfaceStatusVserver | 0 | 0 | The status of the interface with respect to it's Vserver. It can be either UP(0) or DOWN(1). |
| 1.3.6.1.4.1.789.1.22.4.1.26 | logicalInterfaceDataProtocol | 0 | 0 | A list of data protocols. |
| 1.3.6.1.4.1.789.1.22.4.1.27 | logicalInterfaceFcpWwpn | 0 | 0 | The WWPN of a FCP data LIF. |
| 1.3.6.1.4.1.789.1.22.4.1.28 | logicalInterfaceComment | 0 | 0 | A comment to further identify a LIF. |