Describes how options (cards, devices, etc.) physically connect
to this bus port. If 'Other' is used, then the Connector Type Description
attribute shall be used.
Parsed from file Cio400i.mib.txt
Company: intel
Module: ADAPTECCIOSTANDARDGROUPMIFDEFINITION2-MIB
Vendor: Adaptec Inc.
Module: ADAPTECCIOSTANDARDGROUPMIFDEFINITION2-MIB
[Automatically extracted from oidview.com]
a7007ConnectorType OBJECT-TYPE SYNTAX INTEGER { vOther (1), vUnknown (2), vNone (3), vScsiAHigh-densityShielded50Pins (4), vScsiAHigh-densityUnshielded50Pins (5), vScsiALow-densityShielded50Pins (6), vScsiALow-densityUnshielded50Pins (7), vScsiPHigh-densityShielded68Pins (8), vScsiPHigh-densityUnshielded68Pins (9), vScsiSca-i80Pins (10), vScsiSca-ii80Pins (11), vScsiFibreChannelDb9Copper (12), vScsiFibreChannelFibre (13), vScsiFibreChannelSca-ii40Pins (14), vScsiFibreChannelSca-ii20Pins (15), vScsiFibreChannelBnc (16), vAta3-12Inch40Pins (17), vAta2-12Inch44Pins (18), vSerial9Pin (19), vSerial25Pin (20), vRs23225Pin (21), vRs422 (22), vIeee-488 (23), vAui (24), vUptCategory3 (25), vUptCategory4 (26), vUptCategory5 (27), vBnc (28), vStpRj11 (29), vStpRj45 (30), vStpDb9 (31), vFiberMic (32), vAppleAui (33), vPciSlot (34), vIsaSlot (35), vEisaSlot (36), vVesaSlot (37), vPcmciaSlot (38), vPcCardSlot (39), vFloppyDiskette5-14Inch (40), vFloppyDiskette3-12Inch (41), vHssdc6Pins (42), vGbicSocket (43), v13946Pins (44), vScsiVhdciShielded68Pins (45) } ACCESS read-only STATUS mandatory DESCRIPTION "Describes how options (cards, devices, etc.) physically connect to this bus port. If 'Other' is used, then the Connector Type Description attribute shall be used." ::= {eBusPort 10}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.795.50.10.1.7007.1.1 | a7007BusPortIndex | 0 | 0 | An index into the Bus Port table. |
1.3.6.1.4.1.795.50.10.1.7007.1.2 | a7007Protocol | 0 | 0 | The protocol describing the electrical characteristic of the Bus Port. If 'Other' is used, then the Protocol Description attrib… |
1.3.6.1.4.1.795.50.10.1.7007.1.3 | a7007ProtocolDescription | 0 | 0 | Additional description of the protocol described above. If 'Other' was specified above, then this field shall be used. Otherwis… |
1.3.6.1.4.1.795.50.10.1.7007.1.4 | a7007SignalCharacteristics | 0 | 0 | The signal characteristics of the Bus Port being described. |
1.3.6.1.4.1.795.50.10.1.7007.1.5 | a7007AddressDescriptor | 0 | 0 | The address descriptor of this bus port. For example, the SCSI address of this port. |
1.3.6.1.4.1.795.50.10.1.7007.1.6 | a7007Isochronous | 0 | 0 | Indicates whether or not this bus port supports isochronous transfers. |
1.3.6.1.4.1.795.50.10.1.7007.1.7 | a7007MaximumWidth | 0 | 0 | The maximum width, in bits, of this Bus Port's data path. A value of 1 should be used for serial. |
1.3.6.1.4.1.795.50.10.1.7007.1.8 | a7007MaximumTransferRate | 0 | 0 | The theoretical maximum transfer rate, in millions of bytes per second, that this Bus Port is capable of achieving under ideal c… |
1.3.6.1.4.1.795.50.10.1.7007.1.9 | a7007MaximumNumberOfAttachments | 0 | 0 | The maximum number of directly addressable entities supported by this bus port's protocol. A value of zero should be used if th… |
1.3.6.1.4.1.795.50.10.1.7007.1.11 | a7007ConnectorTypeDescription | 0 | 0 | An additional text description of the type of connector describe above. If 'Other' was specified above, then this field shall b… |
1.3.6.1.4.1.795.50.10.1.7007.1.12 | a7007ConnectorGender | 0 | 0 | Indicates the gender of the connector described above. |