When this object is set to on, the switch will assign the port's
default group id to all such devices which are learned and
do not match any policies for mobile groups. If it is set to off,
such devices will get assigned to no groups
and the traffic they send will be discarded by the switch.
Parsed from file xylan-vlan.mib.txt
Company: None
Module: XYLAN-VLAN-MIB
When this object is set to on, the switch will assign the port's
default group id to all such devices which are learned and
do not match any policies for mobile groups. If it is set to off,
such devices will get assigned to no groups
and the traffic they send will be discarded by the switch.
Parsed from file XYLAN-VLAN-MIB.mib
Module: XYLAN-VLAN-MIB
Vendor: Xylan Corp.
Module: XYLAN-VLAN-MIB
[Automatically extracted from oidview.com]
gmDefGroup OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } ACCESS read-write STATUS mandatory DESCRIPTION "When this object is set to on, the switch will assign the port's default group id to all such devices which are learned and do not match any policies for mobile groups. If it is set to off, such devices will get assigned to no groups and the traffic they send will be discarded by the switch." ::= { vAutoTracker 22 }
gmDefGroup OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } ACCESS read-write STATUS mandatory DESCRIPTION "When this object is set to on, the switch will assign the port's default group id to all such devices which are learned and do not match any policies for mobile groups. If it is set to off, such devices will get assigned to no groups and the traffic they send will be discarded by the switch." ::= { vAutoTracker 22 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.800.2.2.10.22.0 | gmDefGroup | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.800.2.2.10.1 | atportRuleTable | 1 | 6 | This table is used to configure a Port Rule for a VLAN. The VLAN has to be created before any rule can be configured for it. |
1.3.6.1.4.1.800.2.2.10.2 | atMacRuleTable | 1 | 6 | This table is used to configure an Auto-Tracker VLAN based on a MAC Rule. Note the a VLAN created by using this table will not b… |
1.3.6.1.4.1.800.2.2.10.3 | atProtoRuleTable | 1 | 6 | This table is used to configure an Auto-Tracker VLAN based on Protocol Rule. Note that any VLAN created using this table will not… |
1.3.6.1.4.1.800.2.2.10.4 | atNetRuleTable | 1 | 7 | This table is used to configure an Auto-Tracker VLAN based on Net Addr Rule. Note that any VLAN created using this table will not… |
1.3.6.1.4.1.800.2.2.10.5 | atUserRuleTable | 1 | 8 | This table is used to configure an Auto-Tracker VLAN based on a User Defined Rule.Note that any VLAN created using this table wil… |
1.3.6.1.4.1.800.2.2.10.6 | atVLANRuleSumTable | 1 | 6 | This table provides the summary of vlan rule configuration. |
1.3.6.1.4.1.800.2.2.10.7 | atVLANControlTable | 1 | 6 | This table gives the control information about all Auto-Tracker VLANs. |
1.3.6.1.4.1.800.2.2.10.8 | atDefaultVlan | 1 | 1 | When set to on, it allows devices to be assigned to the default vlan, else if it set to off, such devices are not assigned to any… |
1.3.6.1.4.1.800.2.2.10.9 | atmcportRuleTable | 1 | 6 | This table is used to configure a Port Rule for a VLAN. The VLAN has to be created before any rule can be configured for it. |
1.3.6.1.4.1.800.2.2.10.10 | atmcMacRuleTable | 1 | 6 | This table is used to configure an Auto-Tracker VLAN based on a MAC Rule. Note the a VLAN created by using this table will not b… |
1.3.6.1.4.1.800.2.2.10.11 | atMcastRuleTable | 1 | 6 | This table is used to configure MCAST Rules for a VLAN. |
1.3.6.1.4.1.800.2.2.10.12 | atmcVLANRuleSumTable | 1 | 6 | This table provides the summary of vlan rule configuration. |
1.3.6.1.4.1.800.2.2.10.13 | atmcVLANControlTable | 1 | 6 | This table gives the control information about all Auto-Tracker VLANs. |
1.3.6.1.4.1.800.2.2.10.14 | gmAutoServiceTable | 1 | 15 | Table of Auto-Activated Services |
1.3.6.1.4.1.800.2.2.10.16 | atBindRuleTable | 1 | 10 | The Binding Rule table. |
1.3.6.1.4.1.800.2.2.10.17 | gmGroupListTable | 1 | 4 | This table lists the groups on a port. |
1.3.6.1.4.1.800.2.2.10.18 | atDHCPportRuleTable | 1 | 6 | This table is used to configure a Port Rule for a VLAN. The VLAN has to be created before any rule can be configured for it. |
1.3.6.1.4.1.800.2.2.10.19 | atDHCPMacRuleTable | 1 | 6 | This table is used to configure an Auto-Tracker VLAN based on a MAC Rule. Note the a VLAN created by using this table will not b… |
1.3.6.1.4.1.800.2.2.10.20 | groupMobilityStatus | 1 | 1 | This object can used to configure the global status of group-mobility feature on the switch. |
1.3.6.1.4.1.800.2.2.10.21 | gmMoveToDefGroup | 1 | 1 | When this object is set on, the switch will remove the port of out of a mobile group when the last device in that group learnt on… |