This is an entry in the vsmSignalingTemplateTable. The signaling
template name is a required field in order to create a row.
Parsed from file xylan-vsm.mib.txt
Company: None
Module: XYLAN-VSM-MIB
This is an entry in the vsmSignalingTemplateTable. This table is not supported
For more information, please see the following CLI command:
[Note: There is NO equivalent command in the CLI.]
Parsed from file XYLAN-VSM-MIB.mib
Module: XYLAN-VSM-MIB
Vendor: Alcatel
Module: XYLAN-VSM-MIB (xylan-vsm-0.mib)
Type: ENTRY
Access: not-accessible
Syntax: VsmSignalingTemplateEntry
Automatically extracted from www.mibdepot.com
vsmSignalingTemplateEntry OBJECT-TYPE SYNTAX VsmSignalingTemplateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the vsmSignalingTemplateTable. The signaling template name is a required field in order to create a row." INDEX { vsmSigTmplIndex } ::= { vsmSignalingTemplateTable 1 }
vsmSignalingTemplateEntry OBJECT-TYPE SYNTAX VsmSignalingTemplateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the vsmSignalingTemplateTable. This table is not supported For more information, please see the following CLI command: [Note: There is NO equivalent command in the CLI.] " INDEX { vsmSigTmplIndex } ::= { vsmSignalingTemplateTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.800.2.26.2.1.1.1 | vsmSigTmplIndex | 0 | 0 | Integer index into this table. |
1.3.6.1.4.1.800.2.26.2.1.1.2 | vsmSigTmplName | 0 | 0 | This is not supported. For more information, please see the following CLI command: voice signaling template 'signalingTemplateNam… |
1.3.6.1.4.1.800.2.26.2.1.1.3 | vsmSigTmplRowStatus, vsmSigTmplProtocol | 0 | 0 | The signaling protocol this profile has been set up to perform. |
1.3.6.1.4.1.800.2.26.2.1.1.4 | vsmSigTmplCallerIdName | 0 | 0 | The originating name to transmit may be private, unavailable or available. |
1.3.6.1.4.1.800.2.26.2.1.1.5 | vsmSigTmplCallerIdNameStr | 0 | 0 | The caller Id name is only meaningful if the vsmSigTmplCallerIdName is set to available. |
1.3.6.1.4.1.800.2.26.2.1.1.6 | vsmSigTmplCallerIdNumber | 0 | 0 | The originating phone number to transmit may be private, unavailable or available. |
1.3.6.1.4.1.800.2.26.2.1.1.7 | vsmSigTmplCallerIdNumberStr | 0 | 0 | The originating telephone number to transmit is only meaningful if vsmSigTmplCallerIdNumber is set to available. |
1.3.6.1.4.1.800.2.26.2.1.1.8 | vsmSigTmplToneTable | 0 | 0 | Selects the Caller Id tone table for the VSM daughter card. |
1.3.6.1.4.1.800.2.26.2.1.1.9 | vsmSigTmplOutDialType | 0 | 0 | New Leaf for 2.2f parser. |
1.3.6.1.4.1.800.2.26.2.1.1.10 | vsmSigTmplOutWait | 0 | 0 | The time to delay after going off-hook, before generating the first outbound dial digit(s). |
1.3.6.1.4.1.800.2.26.2.1.1.11 | vsmSigTmplOutToneDigitDur | 0 | 0 | This is the duration, in milliseconds, of a tone that is generated when tone dialing is used. |
1.3.6.1.4.1.800.2.26.2.1.1.12 | vsmSigTmplOutToneInterDigitDur | 0 | 0 | This is the duration, in milliseconds, of the inter digit gap when tone dialing is used. |
1.3.6.1.4.1.800.2.26.2.1.1.13 | vsmSigTmplOutToneAmplitude | 0 | 0 | The This defines the power level in 1/10 dB increments that is used for transmitting digits using tone dialing. The value must b… |
1.3.6.1.4.1.800.2.26.2.1.1.14 | vsmSigTmplCallLimitCtrl | 0 | 0 | Enables or Disables call timing limit duration (vsmSigTmplCallLimit). |
1.3.6.1.4.1.800.2.26.2.1.1.15 | vsmSigTmplCallLimit | 0 | 0 | The call duration limit. If the call length is exceeded, the call is automatically terminated. |
1.3.6.1.4.1.800.2.26.2.1.1.16 | vsmSigTmplAnswerWaitLimitCtrl | 0 | 0 | Enables or Disables call answer limit timing (vsmSigTmplAnswerWaitLimit). |
1.3.6.1.4.1.800.2.26.2.1.1.17 | vsmSigTmplAnswerWaitLimit | 0 | 0 | The wait-for-answer time limit. If the call destination does not answer within this period, the call is automatically terminated. |
1.3.6.1.4.1.800.2.26.2.1.1.18 | vsmSigTmplHangupWaitLimitCtrl | 0 | 0 | Enables or Disables call hangup limit timing (vsmSigTmplHangupWaitLimit). |
1.3.6.1.4.1.800.2.26.2.1.1.19 | vsmSigTmplHangupWaitLimit | 0 | 0 | The wait-for-hang-up time limit. If the call originator does not hang up within this time period after the destination has hung u… |
1.3.6.1.4.1.800.2.26.2.1.1.20 | vsmSigTmplFaxHoldoverDelay | 0 | 0 | The Fax holdover delay. This is the time the system will delay after detecting on-hook during fax mode operation, before generati… |
1.3.6.1.4.1.800.2.26.2.1.1.21 | vsmSigTmplCompanding | 0 | 0 | Select the companding used at the DSP's PCM interface. |
1.3.6.1.4.1.800.2.26.2.1.1.22 | vsmSigTmplReceiveGain | 0 | 0 | The Receive (Rx) Gain, in dB. The reference to Rx gain is from the perspective of the Micro software. The Micro interprets recei… |
1.3.6.1.4.1.800.2.26.2.1.1.23 | vsmSigTmplTransmitGain | 0 | 0 | The Transmit (Tx) Gain, in dB. The reference to Tx gain is from the perspective of the Micro software. The Micro interprets trans… |
1.3.6.1.4.1.800.2.26.2.1.1.24 | vsmSigTmplIdleNoise | 0 | 0 | The Idle Noise level (also known as comfort noise), in 0.01dBm. a value of -5000 means -50 dbm. |
1.3.6.1.4.1.800.2.26.2.1.1.25 | vsmSigTmplInBandCallProgressTones | 0 | 0 | Enables or Disables support for passing call progress tones in band (ie, call progress tones are carried as voice) |
1.3.6.1.4.1.800.2.26.2.1.1.26 | vsmSigTmplInBandCodecSwitching | 0 | 0 | Enables or Disables capability of the call to switch from one codec to another in band (in voice mode) by detecting change in pay… |
1.3.6.1.4.1.800.2.26.2.1.1.27 | vsmSigTmplPSUCodecSwitching | 0 | 0 | Enables or Disables Coding switchover in the Signaling band. In the PSU this is accomplished by using the Set-Coding API. This ha… |
1.3.6.1.4.1.800.2.26.2.1.1.28 | vsmSigTmplNetworkOverlapDialing | 0 | 0 | Enables or Disables support for Network overlap dialing. The Net connect happens even if all the digits have not been collected.… |
1.3.6.1.4.1.800.2.26.2.1.1.29 | vsmSigTmplFullCallProgressTones | 0 | 0 | Enables or Disables support for full call progress tones in signaling band. Call progress indications are sent as information typ… |
1.3.6.1.4.1.800.2.26.2.1.1.30 | vsmSigTmplRingBack | 0 | 0 | Enables or Disables ring back detection. |
1.3.6.1.4.1.800.2.26.2.1.1.31 | vsmSigTmplInfoElementTransport | 0 | 0 | Enables or Disables general user to user Information Element (IE) packet passing support. This means that the call is capable … |
1.3.6.1.4.1.800.2.26.2.1.1.32 | vsmSigTmplQSIGInfoElementTransport | 0 | 0 | Enables or Disables QSIG Information Element (IE) packet passing support. |
1.3.6.1.4.1.800.2.26.2.1.1.33 | vsmSigTmplDataSetup | 0 | 0 | Enables or Disables identification that this is a data call. One of the following objects must be on, vsmSigTmplDataSetup, vsmSig… |
1.3.6.1.4.1.800.2.26.2.1.1.34 | vsmSigTmplVoiceSetup | 0 | 0 | Enables or Disables identification that this is a voice call. One of the following objects must be on, vsmSigTmplDataSetup, vsmSi… |
1.3.6.1.4.1.800.2.26.2.1.1.35 | vsmSigTmplFAXSetup | 0 | 0 | Enables or Disables identification that this is a FAX call. One of the following objects must be on, vsmSigTmplDataSetup, vsmSigT… |
1.3.6.1.4.1.800.2.26.2.1.1.36 | vsmSigTmplModemSetup | 0 | 0 | Enables or Disables identification that this is a modem call. One of the following objects must be on, vsmSigTmplDataSetup, vsmSi… |
1.3.6.1.4.1.800.2.26.2.1.1.37 | vsmSigTmplCallProgressToneDetCtrl | 0 | 0 | Controls the detection of call progress tones. off - disables call progress detection. on - enables call progrss detection. rel… |
1.3.6.1.4.1.800.2.26.2.1.1.38 | vsmSigTmplCallProgressToneDetCfg | 0 | 0 | This command is used to specify which configuration will be used for call progress tone detection. Each configuration contains … |
1.3.6.1.4.1.800.2.26.2.1.1.39 | vsmSigTmplAcousticEchoCanOper | 0 | 0 | new leaf for 2.2f parser |
1.3.6.1.4.1.800.2.26.2.1.1.40 | vsmSigTmplRowStatus | 0 | 0 | None |