This is an entry in the vsmSignalingChannelTable.
Parsed from file xylan-vsm.mib.txt
Company: None
Module: XYLAN-VSM-MIB
This is an entry in the vsmSignalingChannelTable.
For more information, please see the following CLI command:
[Note: There is NO equivalent command in the CLI.]
Parsed from file XYLAN-VSM-MIB.mib
Module: XYLAN-VSM-MIB
Vendor: Alcatel
Module: XYLAN-VSM-MIB (xylan-vsm-0.mib)
Type: ENTRY
Access: not-accessible
Syntax: VsmSignalingChannelEntry
Automatically extracted from www.mibdepot.com
vsmSignalingChannelEntry OBJECT-TYPE SYNTAX VsmSignalingChannelEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the vsmSignalingChannelTable." INDEX { vsmChanSlotIndex, vsmChanPortIndex, vsmChanIndex } ::= { vsmSignalingChannelTable 1 }
vsmSignalingChannelEntry OBJECT-TYPE SYNTAX VsmSignalingChannelEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the vsmSignalingChannelTable. For more information, please see the following CLI command: [Note: There is NO equivalent command in the CLI.] " INDEX { vsmChanSlotIndex, vsmChanPortIndex, vsmChanIndex } ::= { vsmSignalingChannelTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.800.2.26.2.10.1.1 | vsmSigChanProtocol | 0 | 0 | The signaling protocol this profile has been set up to perform. |
| 1.3.6.1.4.1.800.2.26.2.10.1.2 | vsmSigChanCallerIdName | 0 | 0 | The originating name to transmit may be private, unavailable or available. |
| 1.3.6.1.4.1.800.2.26.2.10.1.3 | vsmSigChanCallerIdNameStr | 0 | 0 | The caller Id name is meaningful if the vsmSigChanCallerIdType is set to available. |
| 1.3.6.1.4.1.800.2.26.2.10.1.4 | vsmSigChanCallerIdNumber | 0 | 0 | The originating phone number to transmit may be private, unavailable or available. |
| 1.3.6.1.4.1.800.2.26.2.10.1.5 | vsmSigChanCallerIdNumberStr | 0 | 0 | The originating telephone number to transmit is only meaningful if vsmSigChanCallerIdNumberType is set to available. |
| 1.3.6.1.4.1.800.2.26.2.10.1.6 | vsmSigChanToneTable | 0 | 0 | Selects the Caller Id tone table for the VSM daughter card. |
| 1.3.6.1.4.1.800.2.26.2.10.1.7 | vsmSigChanOutWait | 0 | 0 | The time to delay after going off-hook, before generating the first outbound dial digit(s). |
| 1.3.6.1.4.1.800.2.26.2.10.1.8 | vsmSigChanOutToneDigitDur | 0 | 0 | This is the duration, in milliseconds, of a tone that is generated when tone dialing is used. |
| 1.3.6.1.4.1.800.2.26.2.10.1.9 | vsmSigChanOutToneInterDigitDur | 0 | 0 | This is the duration, in milliseconds, of the inter digit gap when tone dialing is used. |
| 1.3.6.1.4.1.800.2.26.2.10.1.10 | vsmSigChanUnused, vsmSigChanOutToneAmplitude | 0 | 0 | This object is no longer supported. Was vsmSigTmplOutToneAmplitude. |
| 1.3.6.1.4.1.800.2.26.2.10.1.11 | vsmSigChanCallLimitCtrl | 0 | 0 | Enables or Disables call timing limit duration (vsmSigChanCallLimit). |
| 1.3.6.1.4.1.800.2.26.2.10.1.12 | vsmSigChanCallLimit | 0 | 0 | The call duration limit. If the call length is exceeded, the call is automatically terminated. |
| 1.3.6.1.4.1.800.2.26.2.10.1.13 | vsmSigChanAnswerWaitLimitCtrl | 0 | 0 | Enables or Disables call answer limit timing (vsmSigChanAnswerWaitLimit). |
| 1.3.6.1.4.1.800.2.26.2.10.1.14 | vsmSigChanAnswerWaitLimit | 0 | 0 | The wait-for-answer time limit. If the call destination does not answer within this period, the call is automatically terminated. |
| 1.3.6.1.4.1.800.2.26.2.10.1.15 | vsmSigChanHangupWaitLimitCtrl | 0 | 0 | Enables or Disables call hangup limit timing (vsmSigChanHangupWaitLimit). |
| 1.3.6.1.4.1.800.2.26.2.10.1.16 | vsmSigChanHangupWaitLimit | 0 | 0 | The wait-for-hang-up time limit. If the call originator does not hang up within this time period after the destination has hung u… |
| 1.3.6.1.4.1.800.2.26.2.10.1.17 | vsmSigChanFaxHoldoverDelay | 0 | 0 | The Fax holdover delay. This is the time the system will delay after detecting on-hook during fax mode operation, before generati… |
| 1.3.6.1.4.1.800.2.26.2.10.1.18 | vsmSigChanCompanding | 0 | 0 | Select the companding used at the DSP's PCM interface. |
| 1.3.6.1.4.1.800.2.26.2.10.1.19 | vsmSigChanReceiveGain | 0 | 0 | The Receive (Rx) Gain, in dB. The reference to Rx gain is from the perspective of the Micro software. The Micro interprets recei… |
| 1.3.6.1.4.1.800.2.26.2.10.1.20 | vsmSigChanTransmitGain | 0 | 0 | The Transmit (Tx) Gain, in dB. The reference to Tx gain is from the perspective of the Micro software. The Micro interprets trans… |
| 1.3.6.1.4.1.800.2.26.2.10.1.21 | vsmSigChanIdleNoise | 0 | 0 | The Idle Noise level (also known as comfort noise), in 0.01dBm. a value of -5000 means -50 dbm. |
| 1.3.6.1.4.1.800.2.26.2.10.1.22 | vsmSigChanOverrideInBandCallProgressTones, vsmSigChanInBandCallProgressTones | 0 | 0 | Enables or Disables support for passing call progress tones in band (ie, call progress tones are carried as voice) |
| 1.3.6.1.4.1.800.2.26.2.10.1.23 | vsmSigChanOverrideInBandCodecSwitching, vsmSigChanInBandCodecSwitching | 0 | 0 | Enables or Disables capability of the call to switch from one codec to another in band (in voice mode) by detecting change in pay… |
| 1.3.6.1.4.1.800.2.26.2.10.1.24 | vsmSigChanOverridePSUCodecSwitching, vsmSigChanPSUCodecSwitching | 0 | 0 | Enables or Disables Coding switchover in the Signaling band. In the PSU this is accomplished by using the Set-Coding API. This ha… |
| 1.3.6.1.4.1.800.2.26.2.10.1.25 | vsmSigChanOverrideNetworkOverlapDialing, vsmSigChanNetworkOverlapDialing | 0 | 0 | Enables or Disables support for Network overlap dialing. The Net connect happens even if all the digits have not been collected.… |
| 1.3.6.1.4.1.800.2.26.2.10.1.26 | vsmSigChanOverrideFullCallProgressTones, vsmSigChanFullCallProgressTones | 0 | 0 | Enables or Disables support for full call progress tones in signaling band. Call progress indications are sent as information typ… |
| 1.3.6.1.4.1.800.2.26.2.10.1.27 | vsmSigChanOverrideRingBack, vsmSigChanRingBack | 0 | 0 | Enables or Disables ring back detection. This object should only be used under the supervision of trained personnel. For more inf… |
| 1.3.6.1.4.1.800.2.26.2.10.1.28 | vsmSigChanOverrideInfoElementTransport, vsmSigChanInfoElementTransport | 0 | 0 | Enables or Disables general user to user Information Element (IE) packet passing support. This means that the call is capable … |
| 1.3.6.1.4.1.800.2.26.2.10.1.29 | vsmSigChanOverrideQSIGInfoElementTransport, vsmSigChanQSIGInfoElementTransport | 0 | 0 | Enables or Disables QSIG Information Element (IE) packet passing support. |
| 1.3.6.1.4.1.800.2.26.2.10.1.30 | vsmSigChanOverrideDataSetup, vsmSigChanDataSetup | 0 | 0 | Enables or Disables identification that this is a data call. Only one of the following objects should be enabled: vsmSigChanHangu… |
| 1.3.6.1.4.1.800.2.26.2.10.1.31 | vsmSigChanOverrideVoiceSetup, vsmSigChanVoiceSetup | 0 | 0 | Enables or Disables identification that this is a voice call. Only one of the following objects should be enabled: vsmSigChanHang… |
| 1.3.6.1.4.1.800.2.26.2.10.1.32 | vsmSigChanOverrideFAXSetup, vsmSigChanFAXSetup | 0 | 0 | Enables or Disables identification that this is a FAX call. Only one of the following objects should be enabled: vsmSigChanHangup… |
| 1.3.6.1.4.1.800.2.26.2.10.1.33 | vsmSigChanOverrideModemSetup, vsmSigChanModemSetup | 0 | 0 | Enables or Disables identification that this is a modem call. Only one of the following objects should be enabled: vsmSigChanHang… |
| 1.3.6.1.4.1.800.2.26.2.10.1.34 | vsmSigChanCallProgressToneDetControl, vsmSigChanCallProgressToneDetCtrl | 0 | 0 | This command is used to control the detection of call progress tones. Value Description ===== =========== off Disabl… |
| 1.3.6.1.4.1.800.2.26.2.10.1.35 | vsmSigChanCallProgressToneDetCfg | 0 | 0 | Specifies which configuration will be used for call progress tone detection. A configuration includes filter configuration info… |
| 1.3.6.1.4.1.800.2.26.2.10.1.36 | vsmSigChanAssignTmplName | 0 | 0 | This object specifies the ID of the Signaling template to assign to this channel. |
| 1.3.6.1.4.1.800.2.26.2.10.1.37 | vsmSigChanAssignTmplStatus | 0 | 0 | Causes the vsmSigChanAssignTmplName to be assigned. For more information, please see the following CLI command: voice channel slo… |
| 1.3.6.1.4.1.800.2.26.2.10.1.38 | vsmSigChanOutDialType | 0 | 0 | This command is used to select the out dialing characteristic of the channels on the specified port. Value Description ===== =====… |
| 1.3.6.1.4.1.800.2.26.2.10.1.39 | vsmSigChanV18ToneDetThHangTime | 0 | 0 | This command sets the signal duration threshold for V18 tone detection. For more information, please see the following CLI comma… |
| 1.3.6.1.4.1.800.2.26.2.10.1.40 | vsmSigChanV18ToneDetThLevel | 0 | 0 | This command sets the signal strength threshold for V18 tone detection. For more information, please see the following CLI comma… |
| 1.3.6.1.4.1.800.2.26.2.10.1.41 | vsmSigChanV18ToneDetThFraction | 0 | 0 | This command sets the signal fraction threshold for V18 tone detection. For more information, please see the following CLI comma… |
| 1.3.6.1.4.1.800.2.26.2.10.1.42 | vsmSigChanSinFreqToneDetThLev | 0 | 0 | This command sets the signal strength threshold for SF {single frequency } tone detection. For more information, please see the … |
| 1.3.6.1.4.1.800.2.26.2.10.1.43 | vsmSigChanSinFreqToneDetThTime | 0 | 0 | vsmSigChanSinFreqToneDetThtime |
| 1.3.6.1.4.1.800.2.26.2.10.1.44 | vsmSigChanEchoCancelNonSens | 0 | 0 | This command sets the sensitivity of the echo canceller non-linear processor. For more information, please see the following CLI… |
| 1.3.6.1.4.1.800.2.26.2.10.1.45 | vsmSigChanAcousticEchoCancellerMode | 0 | 0 | This command selects whether the line of the Acoustic Echo Canceller (EC) is started on channel startup. For more information, p… |
| 1.3.6.1.4.1.800.2.26.2.10.1.46 | vsmSigChanAcouEchoCanNonProc | 0 | 0 | This command enables or disables the (TBD: acoustic echo canceller non-linear processor or comfort noise level generator) For mor… |
| 1.3.6.1.4.1.800.2.26.2.10.1.47 | vsmSigChanAcEchoCanSetSpGain | 0 | 0 | This command sets the Handset (HS) specker gain. For more information, please see the following CLI command: voice signaling chan… |
| 1.3.6.1.4.1.800.2.26.2.10.1.48 | vsmSigChanAcEchoCanFreeSpGain | 0 | 0 | This command sets the Hands Free (HF) specker gain. For more information, please see the following CLI command: voice signaling c… |
| 1.3.6.1.4.1.800.2.26.2.10.1.49 | vsmSigChanAcousticEchoCanOper | 0 | 0 | new leaf for 2.2f parser For more information, please see the following CLI command: voice signaling channel slot/port/startChann… |
| 1.3.6.1.4.1.800.2.26.2.10.1.50 | vsmSigChanFxsLSCadenceCoefficient | 0 | 0 | This command selects the fxs cadence coefficient on this channel. For more information, please see the following CLI command: voi… |
| 1.3.6.1.4.1.800.2.26.2.10.1.51 | vsmSigChanFxsLSRingId | 0 | 0 | This command selects the ring id for the specific fxs cadence coefficient on this channel. For more information, please see the f… |
| 1.3.6.1.4.1.800.2.26.2.10.1.52 | vsmSigChanFxsGSCadenceCoefficient | 0 | 0 | This command selects the fxs cadence coefficient on this channel. For more information, please see the following CLI command: voi… |
| 1.3.6.1.4.1.800.2.26.2.10.1.53 | vsmSigChanFxsGSRingId | 0 | 0 | This command selects the ring id for the specific fxs cadence coefficient on this channel. For more information, please see the f… |