This is an entry in the FXO ground start Signaling Table.
Parsed from file xylan-vsm.mib.txt
Company: None
Module: XYLAN-VSM-MIB
This is an entry in the FXO ground start Signaling Table.
This is not supported.
Parsed from file XYLAN-VSM-MIB.mib
Module: XYLAN-VSM-MIB
Vendor: Alcatel
Module: XYLAN-VSM-MIB (xylan-vsm-0.mib)
Type: ENTRY
Access: not-accessible
Syntax: VsmSigTmplFxoGSEntry
Automatically extracted from www.mibdepot.com
vsmSigTmplFxoGSEntry OBJECT-TYPE SYNTAX VsmSigTmplFxoGSEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the FXO ground start Signaling Table." INDEX { vsmSigTmplIndex } ::= { vsmSigTmplFxoGSTable 1 }
vsmSigTmplFxoGSEntry OBJECT-TYPE SYNTAX VsmSigTmplFxoGSEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the FXO ground start Signaling Table. This is not supported. " INDEX { vsmSigTmplIndex } ::= { vsmSigTmplFxoGSTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.800.2.26.2.6.1.1 | vsmSigTmplFxoGSConnectionLoopOpenDebounce | 0 | 0 | Debounce interval for loop open detection for an existing conection. |
1.3.6.1.4.1.800.2.26.2.6.1.2 | vsmSigTmplFxoGSMaxTipGroundWait | 0 | 0 | Maximum time the interface will wait after ring ground is asserted for a tip ground receive. |
1.3.6.1.4.1.800.2.26.2.6.1.3 | vsmSigTmplFxoGSTipGroundDebounce | 0 | 0 | Time, in milliseconds, to be used as a de-bouncer interval for debouncing the tip ground detector. |
1.3.6.1.4.1.800.2.26.2.6.1.4 | vsmSigTmplFxoGSRingingDebounce | 0 | 0 | When a ring signal is modulated by the ringing frequency, the debouncer is used to debounce the incoming ring signal. |
1.3.6.1.4.1.800.2.26.2.6.1.5 | vsmSigTmplFxoGSRingingInterCycle | 0 | 0 | Specifies the time between consecutive ring cycles, in milliseconds. It is used to detect ringing. |
1.3.6.1.4.1.800.2.26.2.6.1.6 | vsmSigTmplFxoGSRingingInterPulse | 0 | 0 | Specifies the time between consecutive ring pulses in the same ring cycle, in milliseconds. It is used to detect ringing. |
1.3.6.1.4.1.800.2.26.2.6.1.7 | vsmSigTmplFxoGSCallerIdDetect | 0 | 0 | If enabled, Caller ID will be detected. |
1.3.6.1.4.1.800.2.26.2.6.1.8 | vsmSigTmplFxoGSAnswerAfterRings | 0 | 0 | Specifies the number of rings to elapse before answering an incoming call. |
1.3.6.1.4.1.800.2.26.2.6.1.9 | vsmSigTmplFxoGSLoopCurrentDebounce | 0 | 0 | Time, in milliseconds, to use as a de-bouncer interval for debouncing the loop current detector. |
1.3.6.1.4.1.800.2.26.2.6.1.10 | vsmSigTmplFxoGSBattReversalDebounce | 0 | 0 | Time, in milliseconds, to use as a de-bouncer interval for debouncing the battery reversal detector. |