This is an entry in the FXO Loop start Signaling Table.
Parsed from file xylan-vsm.mib.txt
Company: None
Module: XYLAN-VSM-MIB
This is an entry in the FXO Loop start Signaling Table.
This is not supported.
For more information, please see the following CLI command:
[Note: There is NO equivalent command in the CLI.]
Parsed from file XYLAN-VSM-MIB.mib
Module: XYLAN-VSM-MIB
Vendor: Alcatel
Module: XYLAN-VSM-MIB (xylan-vsm-0.mib)
Type: ENTRY
Access: not-accessible
Syntax: VsmSigTmplFxoLSEntry
Automatically extracted from www.mibdepot.com
vsmSigTmplFxoLSEntry OBJECT-TYPE SYNTAX VsmSigTmplFxoLSEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the FXO Loop start Signaling Table." INDEX { vsmSigTmplIndex } ::= { vsmSigTmplFxoLSTable 1 }
vsmSigTmplFxoLSEntry OBJECT-TYPE SYNTAX VsmSigTmplFxoLSEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is an entry in the FXO Loop start Signaling Table. This is not supported. For more information, please see the following CLI command: [Note: There is NO equivalent command in the CLI.] " INDEX { vsmSigTmplIndex } ::= { vsmSigTmplFxoLSTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.800.2.26.2.7.1.1 | vsmSigTmplFxoLSRingingDebounce | 0 | 0 | When a ring signal is modulated by the ringing frequency, the debouncer is used to debounce the incoming ring signal. |
1.3.6.1.4.1.800.2.26.2.7.1.2 | vsmSigTmplFxoLSCPCDetectCtrl | 0 | 0 | This command is used to enable or disable detection of a CPC (supervisory disconnect) signal. |
1.3.6.1.4.1.800.2.26.2.7.1.3 | vsmSigTmplFxoLSCPCDetect | 0 | 0 | The expected duration of the CPC (supervisory disconnect) signal in milliseconds. If the loop current drops for a time period sho… |
1.3.6.1.4.1.800.2.26.2.7.1.4 | vsmSigTmplFxoLSGuardOut | 0 | 0 | After the call, the period of time where the channel does not originate a call, but will receive a call. |
1.3.6.1.4.1.800.2.26.2.7.1.5 | vsmSigTmplFxoLSRingingInterCycle | 0 | 0 | The time between ring cycles (ringing pulse plus time between ring pulses) in milliseconds. It is used to detect ringing. |
1.3.6.1.4.1.800.2.26.2.7.1.6 | vsmSigTmplFxoLSRingingInterPulse | 0 | 0 | The time between ring pulses in milliseconds. It is used to detect ringing. |
1.3.6.1.4.1.800.2.26.2.7.1.7 | vsmSigTmplFxoLSCallerIdDetect | 0 | 0 | If enabled, Caller ID will be detected. |
1.3.6.1.4.1.800.2.26.2.7.1.8 | vsmSigTmplFxoLSAnswerAfterRings | 0 | 0 | Specifies the number of rings to elapse before answering an incoming call. |
1.3.6.1.4.1.800.2.26.2.7.1.9 | vsmSigTmplFxoLSLoopCurrentDebounce | 0 | 0 | Time, in milliseconds, to use as a de-bouncer interval for debouncing the loop current detector. |
1.3.6.1.4.1.800.2.26.2.7.1.10 | vsmSigTmplFxoLSBattReversalDebounce | 0 | 0 | Time, in milliseconds, to use as a de-bouncer interval for debouncing the battery reversal detector. |