C14 LE Client Identifier. Each LE Client requires a
LE Client Identifier (LECID) assigned by the LE
Server during the Join phase. The LECID is placed
in control requests by the LE Client and MAY be
used for echo suppression on multicast data frames
sent by that LE Client. This value MUST NOT
change without terminating the LE Client and
returning to the Initial state. A valid LECID
MUST be in the range X'0001' through X'FEFF'.
The value of this object is only meaningful for a LEC
that is connected to a LES. For a LEC which does not
belong to an emulated LAN, the value of this object
is defined to be 0.
Parsed from file xylan-atm.mib.txt
Company: None
Module: XYLAN-ATM-MIB
C14 LE Client Identifier. Each LE Client requires a
LE Client Identifier (LECID) assigned by the LE
Server during the Join phase. The LECID is placed
in control requests by the LE Client and MAY be
used for echo suppression on multicast data frames
sent by that LE Client. This value MUST NOT
change without terminating the LE Client and
returning to the Initial state. A valid LECID
MUST be in the range X'0001' through X'FEFF'.
The value of this object is only meaningful for a LEC
that is connected to a LES. For a LEC which does not
belong to an emulated LAN, the value of this object
is defined to be 0.
Parsed from file XYLAN-ATM-MIB.mib
Module: XYLAN-ATM-MIB
Vendor: Xylan Corp.
Module: XYLAN-ATM-MIB
[Automatically extracted from oidview.com]
atmLecID OBJECT-TYPE SYNTAX INTEGER( 0..65279 ) ACCESS read-only STATUS mandatory DESCRIPTION "C14 LE Client Identifier. Each LE Client requires a LE Client Identifier (LECID) assigned by the LE Server during the Join phase. The LECID is placed in control requests by the LE Client and MAY be used for echo suppression on multicast data frames sent by that LE Client. This value MUST NOT change without terminating the LE Client and returning to the Initial state. A valid LECID MUST be in the range X'0001' through X'FEFF'. The value of this object is only meaningful for a LEC that is connected to a LES. For a LEC which does not belong to an emulated LAN, the value of this object is defined to be 0." REFERENCE "ATM Forum LAN Emulation Over ATM Specification, V1.0, Section 5.1.1" ::= { atmLecStatusEntry 5 }
atmLecID OBJECT-TYPE SYNTAX INTEGER( 0..65279 ) ACCESS read-only STATUS mandatory DESCRIPTION "C14 LE Client Identifier. Each LE Client requires a LE Client Identifier (LECID) assigned by the LE Server during the Join phase. The LECID is placed in control requests by the LE Client and MAY be used for echo suppression on multicast data frames sent by that LE Client. This value MUST NOT change without terminating the LE Client and returning to the Initial state. A valid LECID MUST be in the range X'0001' through X'FEFF'. The value of this object is only meaningful for a LEC that is connected to a LES. For a LEC which does not belong to an emulated LAN, the value of this object is defined to be 0." REFERENCE "ATM Forum LAN Emulation Over ATM Specification, V1.0, Section 5.1.1" ::= { atmLecStatusEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.800.2.4.8.2.1.1 | atmxLecStatusSlotIndex | 0 | 0 | Slot index to identify an instance of this table. |
| 1.3.6.1.4.1.800.2.4.8.2.1.2 | atmxLecStatusPortIndex | 0 | 0 | Port index to identify an instance of this table. |
| 1.3.6.1.4.1.800.2.4.8.2.1.3 | atmxLecStatusServiceNum | 0 | 0 | Service number index to identify an instance of this table. |
| 1.3.6.1.4.1.800.2.4.8.2.1.4 | atmLecPrimaryAtmAddress | 0 | 0 | C1 LE Client's ATM Addresses. The primary ATM address of this LAN Emulation Client. This address is used to establish the Contro… |
| 1.3.6.1.4.1.800.2.4.8.2.1.6 | atmLecInterfaceState | 0 | 0 | The mandatory state of the LAN Emulation Client. Note that 'ifOperStatus' is defined to be 'up' when, and only when, 'atmLecInter… |
| 1.3.6.1.4.1.800.2.4.8.2.1.7 | atmLecLastFailureRespCode | 0 | 0 | Status code from the last failed Configure response or Join response. Failed responses are those for which the LE_CONFIGURE_RESP… |
| 1.3.6.1.4.1.800.2.4.8.2.1.8 | atmLecLastFailureState | 0 | 0 | The state this client was in when it updated the 'atmLecLastFailureRespCode'. If 'atmLecLastFailureRespCode' is 'none', this obje… |
| 1.3.6.1.4.1.800.2.4.8.2.1.9 | atmLecProtocol | 0 | 0 | The LAN Emulation protocol which this client supports, and specifies in its LE_JOIN_REQUESTs. |
| 1.3.6.1.4.1.800.2.4.8.2.1.10 | atmLecVersion | 0 | 0 | The LAN Emulation protocol version which this client supports, and specifies in its LE_JOIN_REQUESTs. |
| 1.3.6.1.4.1.800.2.4.8.2.1.11 | atmLecTopologyChange | 0 | 0 | C19 Topology Change. Boolean indication that the LE Client is using the Forward Delay Time C18, instead of the Aging Time C17, t… |
| 1.3.6.1.4.1.800.2.4.8.2.1.12 | atmLecConfigServerAtmAddress | 0 | 0 | The ATM address of the LAN Emulation Configuration Server (if known) or the empty string (otherwise). |
| 1.3.6.1.4.1.800.2.4.8.2.1.13 | atmLecConfigSource | 0 | 0 | Indicates whether this LAN Emulation Client used the LAN Emulation Configuration Server, and, if so, what method it used to estab… |
| 1.3.6.1.4.1.800.2.4.8.2.1.14 | atmLecActualLanType | 0 | 0 | C2 LAN Type. The data frame format that this LAN Emulation Client is using right now. This may come from * atmLecConfigLanType,… |
| 1.3.6.1.4.1.800.2.4.8.2.1.15 | atmLecActualMaxDataFrameSize | 0 | 0 | C3 Maximum Data Frame Size. The maximum data frame size that this LAN Emulation client is using right now. This may come from * … |
| 1.3.6.1.4.1.800.2.4.8.2.1.16 | atmLecActualLanName | 0 | 0 | C5 ELAN Name. The identity of the emulated LAN which this client last joined, or wishes to join. This may come from * atmLecCon… |
| 1.3.6.1.4.1.800.2.4.8.2.1.17 | atmLecActualLesAtmAddress | 0 | 0 | C9 LE Server ATM Address. The LAN Emulation Server address currently in use or most recently attempted. If no LAN Emulation Serve… |
| 1.3.6.1.4.1.800.2.4.8.2.1.18 | atmLecProxyClient | 0 | 0 | C4 Proxy. Indicates whether this client is acting as a proxy. Proxy clients are allowed to represent unregistered MAC addresses, … |