lost cells ratio threshold - default=1/1024
Parsed from file swc.MIB.txt
Company: marconi
Module: SWC-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
swcGlbClrTrh OBJECT-TYPE SYNTAX INTEGER { b-8 (1), b-16 (2), b-32 (3), b-64 (4), b-128 (5), b-256 (6), b-512 (7), b-1024 (8), b-2048 (9), b-4096 (10) } ACCESS read-write STATUS mandatory DESCRIPTION "lost cells ratio threshold - default=1/1024" ::= { swcConfig 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.809.3.2.5.1.7.0 | swcGlbClrTrh | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.809.3.2.5.1.1 | swcGlbTransSig | 1 | 1 | transparent signaling - default=enabled. This parameter controls the signaling VC (vpi=0,vci=15) if enabled - it connects user to… |
1.3.6.1.4.1.809.3.2.5.1.2 | swcGlbIlmiTrans | 1 | 1 | ILMI transparent - default=enabled This parameter controls the ILMI VC (vpi=0,vci=16) if enabled - it connects user to network. if… |
1.3.6.1.4.1.809.3.2.5.1.3 | swcGlbBipvTrh | 1 | 1 | SECB BIPV threshold - default=16 |
1.3.6.1.4.1.809.3.2.5.1.4 | swcGlbLosTrh | 1 | 1 | SECB lost cells threshold - default=63 |
1.3.6.1.4.1.809.3.2.5.1.5 | swcGlbMisTrh | 1 | 1 | SECB misinserted cells threshold - default=63 |
1.3.6.1.4.1.809.3.2.5.1.6 | swcGlbSesTrh | 1 | 1 | SES failure threshold - default=10 |
1.3.6.1.4.1.809.3.2.5.1.8 | swcGlbCmrTrh | 1 | 1 | misinserted cells ratio threshold - default=1/1024 |
1.3.6.1.4.1.809.3.2.5.1.9 | swcGlbSecbrTrh | 1 | 1 | SECB ratio threshold - default=1/32 |
1.3.6.1.4.1.809.3.2.5.1.10 | swcGlbPMVpi | 1 | 1 | automatic PM vpi - default = 0 . |
1.3.6.1.4.1.809.3.2.5.1.11 | swcGlbPMVciB | 1 | 1 | automatic PM vci base - default = 32 . |
1.3.6.1.4.1.809.3.2.5.1.12 | swcGlbPMVciR | 1 | 1 | automatic PM vci range - default = 32. 0 - disable |
1.3.6.1.4.1.809.3.2.5.1.13 | swcGlbPMPort | 1 | 1 | automatic PM port # - default = user |
1.3.6.1.4.1.809.3.2.5.1.14 | swcGlbLocId | 1 | 1 | own location id |
1.3.6.1.4.1.809.3.2.5.1.15 | swcGlbLoopLocVerify | 1 | 1 | enables - check loop cell destination ID disable - disreguard loop cell destination ID (loop all) =default |
1.3.6.1.4.1.809.3.2.5.1.16 | swcGlbLoopLocId | 1 | 1 | Loopback Destination Location ID send loopback cells with this destination |
1.3.6.1.4.1.809.3.2.5.1.17 | swcGlbAlarmSendLocId | 1 | 1 | transmit location ID in Alarm Cells user - at user side network - at network side both - at both sides - (default) none - use with … |
1.3.6.1.4.1.809.3.2.5.1.19 | swcGlbActionReq | 1 | 1 | action request code as follows: clear_current - clear all current vc statistics. clear_history - clear all vc history statistics.… |
1.3.6.1.4.1.809.3.2.5.1.20 | swcGlbLoopAllId | 1 | 1 | loopback all id: 1. all zeros 2. all ones |
1.3.6.1.4.1.809.3.2.5.1.21 | swcGlbLoopTrapVerify | 1 | 1 | enables - enable traps when cells looped disable - disable traps = default |
1.3.6.1.4.1.809.3.2.5.1.35 | swcGlbInpCell | 1 | 1 | Ingress cells count |
1.3.6.1.4.1.809.3.2.5.1.36 | swcGlbInvalidCell | 1 | 1 | Invalid cells count |
1.3.6.1.4.1.809.3.2.5.1.37 | swcGlbDropCell | 1 | 1 | dropped cells due to congestion |
1.3.6.1.4.1.809.3.2.5.1.38 | swcGlbOutCell | 1 | 1 | output cells count |
1.3.6.1.4.1.809.3.2.5.1.39 | swcGlbLoopSrcId | 1 | 1 | last looped cell - Source Location Id |
1.3.6.1.4.1.809.3.2.5.1.40 | swcGlbLoopIfIndex | 1 | 1 | last looped cell - IfIndex |
1.3.6.1.4.1.809.3.2.5.1.41 | swcGlbLoopVpi | 1 | 1 | last looped cell - vpi |
1.3.6.1.4.1.809.3.2.5.1.42 | swcGlbLoopVci | 1 | 1 | last looped cell - vci |
1.3.6.1.4.1.809.3.2.5.1.50 | swcVplConfTable | 1 | 34 | swcVplConftable |
1.3.6.1.4.1.809.3.2.5.1.51 | swcVclConfTable | 1 | 36 | swcVclConftable |