The total number of frames of valid frame length that have been
received on the ports in this group and for which the FCSError
and CollisionEvent signals were not asserted.
This statistic provides one of the parameters necessary for obtaining
the packet error rate.
The approximate minimum time for rollover of this counter is 80 hours.
This item is a Repeater MIB counter.
Parsed from file MODULS.MIB.txt
Company: None
Module: MODULES-MIB
The total number of frames of valid frame length that have been
received on the ports in this group and for which the FCSError
and CollisionEvent signals were not asserted.
This statistic provides one of the parameters necessary for obtaining
the packet error rate.
The approximate minimum time for rollover of this counter is 80 hours.
This item is a Repeater MIB counter.
Parsed from file MODULES-MIB.mib
Module: MODULES-MIB
Vendor: Lannet Company
Module: MODULES-MIB
[Automatically extracted from oidview.com]
ethGroupTotalFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames of valid frame length that have been received on the ports in this group and for which the FCSError and CollisionEvent signals were not asserted. This statistic provides one of the parameters necessary for obtaining the packet error rate. The approximate minimum time for rollover of this counter is 80 hours. This item is a Repeater MIB counter." ::= { ethGroupEntry 15}
ethGroupTotalFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames of valid frame length that have been received on the ports in this group and for which the FCSError and CollisionEvent signals were not asserted. This statistic provides one of the parameters necessary for obtaining the packet error rate. The approximate minimum time for rollover of this counter is 80 hours. This item is a Repeater MIB counter." ::= { ethGroupEntry 15}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.81.12.2.1.1.1 | ethGroupId | 0 | 0 | Index which identifies the group inside the chassis for which this entry contains information. Equals the number of the slot by … |
| 1.3.6.1.4.1.81.12.2.1.1.2 | ethGroupFIFO | 0 | 0 | Value ON of this attribute describes an internal FIFO error sensed by the internal hardware mechanism of a repeater. |
| 1.3.6.1.4.1.81.12.2.1.1.3 | ethGroup10BTPlus | 0 | 0 | Value ON of this attribute defines activation of the 10BaseTPlus mode - a proprietary extension of the 10BaseT standard. |
| 1.3.6.1.4.1.81.12.2.1.1.4 | ethGroupIntPortsRedundancy | 0 | 0 | Value ON of this attribute defines a redundancy (backup) relationship between internal ports 1 and 2 on a module. |
| 1.3.6.1.4.1.81.12.2.1.1.5 | ethGroupBackboneMode | 0 | 0 | Value On of this attribute defines Backbone Mode of a sensor. Internal ports are enabled and the information path goes straightl… |
| 1.3.6.1.4.1.81.12.2.1.1.6 | ethGroupFOIRLPlusMode | 0 | 0 | Value On of this attribute defines FOIRL of a sensor. When this attribute has value ON, FOIRL Plus mode is enabled, while value … |
| 1.3.6.1.4.1.81.12.2.1.1.7 | ethGroupWrongPortSelection | 0 | 0 | A value ON of this attribute warns of incorrect selection of enabled ports on sensors which impose restrictions on this configur… |
| 1.3.6.1.4.1.81.12.2.1.1.8 | ethGroupBackupBus | 0 | 0 | Defines the common secondary bus for Ethernet modules with bus redundancy defined at port level. |
| 1.3.6.1.4.1.81.12.2.1.1.9 | ethGroupSingleBusMode | 0 | 0 | Value 'on of this attribute defines bus-star mode for cards supporting this type of configuration. |
| 1.3.6.1.4.1.81.12.2.1.1.10 | ethGroupSpecificOID | 0 | 0 | This attribute provides the OID of another group containing additional more specific information regarding this instance. |
| 1.3.6.1.4.1.81.12.2.1.1.11 | ethGroup10FBPlus | 0 | 0 | This variable enables/disables 10BaseFB plus mode. |
| 1.3.6.1.4.1.81.12.2.1.1.12 | ethGroupMasterClock | 0 | 0 | This attribute pertains to the SH-E16 chassis and defines the hub in the stack that generates the clock. |
| 1.3.6.1.4.1.81.12.2.1.1.13 | ethGroupIdleTrx | 0 | 0 | This attribute is relevant to the LE-120Q/SQ modules and when set to 'off' after port disable terminates also light propagation … |
| 1.3.6.1.4.1.81.12.2.1.1.16 | ethGroupTotalOctets | 0 | 0 | The total number of octets contained in the valid frames that have been received on the ports in this group. This counter is th… |
| 1.3.6.1.4.1.81.12.2.1.1.17 | ethGroupTotalErrors | 0 | 0 | The total number of errors which have occurred on all of the ports in this group. This counter is the summation of the values of… |
| 1.3.6.1.4.1.81.12.2.1.1.18 | ethGroupBridgeMode | 0 | 0 | This attribute defines between which buses/ports the IELB bridge is bridging. |
| 1.3.6.1.4.1.81.12.2.1.1.19 | ethGroupBroadcastPkts | 0 | 0 | The total number of good packets received that were directed to the broadcast address, through this ports group. |
| 1.3.6.1.4.1.81.12.2.1.1.20 | ethGroupMulticastPkts | 0 | 0 | The total number of good packets received that were directed to a multicast address, through this ports group. Note that this num… |