Vendor: Lannet Company
Module: MODULES-MIB
[Automatically extracted from oidview.com]
ethPortEntry OBJECT-TYPE SYNTAX EthPortEntry ACCESS not-accessible STATUS mandatory INDEX { ethPortGroupId, ethPortId } ::= { ethPortTable 1 }
ethPortEntry OBJECT-TYPE SYNTAX EthPortEntry ACCESS not-accessible STATUS mandatory INDEX { ethPortGroupId, ethPortId } ::= { ethPortTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.81.12.3.1.1.1 | ethPortGroupId | 0 | 0 | Id of the group to which the port belongs. |
1.3.6.1.4.1.81.12.3.1.1.2 | ethPortId | 0 | 0 | Unique Id of the port in the ethPortTable. |
1.3.6.1.4.1.81.12.3.1.1.3 | ethPortFunctionalStatus | 0 | 0 | The value of this attribute reflects the functional status of synchronous ports. Note that it is not mandatory that all ports sup… |
1.3.6.1.4.1.81.12.3.1.1.4 | ethPortManPart | 0 | 0 | Setting the value of this attribute to ON activates the manual partition mechanism at the port level. Setting the value of this… |
1.3.6.1.4.1.81.12.3.1.1.5 | ethPortJabber | 0 | 0 | Value ON of this attribute reflects jabber transmitted to the port by the hardware of a repeater or transceiver, as a result of… |
1.3.6.1.4.1.81.12.3.1.1.6 | ethPortNoAUILoop | 0 | 0 | Value ON of this attribute indicates that a No AUI Loop fault condition was detected on an AUI repeater port. Valid for LE-10C f… |
1.3.6.1.4.1.81.12.3.1.1.7 | ethPortMJLP | 0 | 0 | Value ON of this attribute describes an internal MJLP (MAU Jabber Lockup Protection) error sensed by the internal hardware mecha… |
1.3.6.1.4.1.81.12.3.1.1.8 | ethPortFIFO | 0 | 0 | Value ON of this attribute describes an internal FIFO error sensed by the internal hardware mechanism of a repeater. Valid for… |
1.3.6.1.4.1.81.12.3.1.1.9 | ethPortAutoPartitionState | 0 | 0 | The AutoPart condition indicates that the port is currently partitioned by the auto-partition protection mechanism. |
1.3.6.1.4.1.81.12.3.1.1.10 | ethPortSQETest | 0 | 0 | Settable attribute which allows activation of SQE test for integrated transceivers. |
1.3.6.1.4.1.81.12.3.1.1.11 | ethPortLastSourceAddr | 0 | 0 | Ethernet source address of the last readable frame received by this port. The value of this item may be set to 000000 (a string … |
1.3.6.1.4.1.81.12.3.1.1.12 | ethPortUserStatus | 0 | 0 | Attribute defining the connection of a port to a single Ethernet source or to a multi-source (segment or star). |
1.3.6.1.4.1.81.12.3.1.1.13 | ethPortMainBusSelection | 0 | 0 | On cards with port-level redundancy, defines the main bus for each port instance as selected by user. |
1.3.6.1.4.1.81.12.3.1.1.14 | ethPortTraffic | 0 | 0 | Counter for the number of bits received on this port in frames with legal length information. |
1.3.6.1.4.1.81.12.3.1.1.15 | ethPortFramesReceivedOK | 0 | 0 | A representation of the total number of frames of legal length that have not been corrupted in transmission. These frames can b… |
1.3.6.1.4.1.81.12.3.1.1.16 | ethPortRunts | 0 | 0 | This counter is incremented by one for each CarrierEvent on this port that meets one of the following two conditions. Only one t… |
1.3.6.1.4.1.81.12.3.1.1.17 | ethPortPacketErrors | 0 | 0 | Counter for the number of frames with errors detected on the port by the agent hardware. This generic port error comprises too … |
1.3.6.1.4.1.81.12.3.1.1.18 | ethPortSpecificOID | 0 | 0 | This attribute provides the OID of another group containing additional more specific information regarding this instance. |
1.3.6.1.4.1.81.12.3.1.1.19 | ethPortCollisions | 0 | 0 | This counter is incremented by one for any CarrierEvent signal on any port for which the CollisionEvent signal on this port is al… |
1.3.6.1.4.1.81.12.3.1.1.20 | ethPortPartitions | 0 | 0 | This counter is incremented by one for each time the repeater has automatically partitioned this port. The conditions that cause… |
1.3.6.1.4.1.81.12.3.1.1.21 | ethPortPygmys | 0 | 0 | The number of pygmys observed on a specified port. The pygmy is a short event. This counter is incremented by one for each Carrier… |
1.3.6.1.4.1.81.12.3.1.1.22 | ethPortJabberCounter | 0 | 0 | Counter for the number of local jabbers detected on a specific port (LE-115Q). |
1.3.6.1.4.1.81.12.3.1.1.23 | ethPortCoupling | 0 | 0 | Indication of port's coupling method in Ethernet transceiver modules (LE-115Q). The coupling methode can be set on board, using s… |
1.3.6.1.4.1.81.12.3.1.1.24 | ethPortPolarity | 0 | 0 | This item defines the polarity state of the connection to LE-240XTC and LE-280XT ports. If the wires are crossed, the value is c… |
1.3.6.1.4.1.81.12.3.1.1.25 | ethPortReadableFrames | 0 | 0 | This object is the number of frames of valid frame length that have been received on this port. This counter is incremented by on… |
1.3.6.1.4.1.81.12.3.1.1.26 | ethPortReadableOctets | 0 | 0 | This counter is the number of octets contained in valid frames that have been received on this port.It is incremented for each f… |
1.3.6.1.4.1.81.12.3.1.1.27 | ethPortFCSErrors | 0 | 0 | This counter is incremented by one for each frame received on this port with the FCSError signal asserted and the FramingError a… |
1.3.6.1.4.1.81.12.3.1.1.28 | ethPortAlignmentErrors | 0 | 0 | This counter is incremented by one for each frame received on this port with the FCSError and FramingError signals asserted and … |
1.3.6.1.4.1.81.12.3.1.1.29 | ethPortFramesTooLong | 0 | 0 | This counter is incremented by one for each frame received on this port whose OctetCount is greater than maxFrameSize (Ref: 4.4.… |
1.3.6.1.4.1.81.12.3.1.1.30 | ethPortLateEvents | 0 | 0 | This counter is incremented by one for each CarrierEvent on this port in which the CollIn(X) variable transitions to the value S… |
1.3.6.1.4.1.81.12.3.1.1.31 | ethPortVeryLongEvents | 0 | 0 | This counter is incremented by one for each CarrierEvent on this port whose ActivityDuration is greater than the MAU Jabber Lock… |
1.3.6.1.4.1.81.12.3.1.1.32 | ethPortDataRateMismatches | 0 | 0 | This counter is incremented by one for each frame received on this port that meets all of the following conditions: a) The Collis… |
1.3.6.1.4.1.81.12.3.1.1.33 | ethPortTotalErrors | 0 | 0 | The total number of errors which have occurred on this port. This counter is the summation of the values of other error counter… |
1.3.6.1.4.1.81.12.3.1.1.34 | ethPortSourceAddrChanges | 0 | 0 | This counter is incremented by one for each time that the last source address of frames entering this port has changed. This may… |
1.3.6.1.4.1.81.12.3.1.1.35 | ethPortOperStatus | 0 | 0 | This object indicates the port's operational status. The operational(1) status indicates that the port is enabled and working, … |
1.3.6.1.4.1.81.12.3.1.1.36 | ethPortBroadcastPkts | 0 | 0 | The total number of good packets received that were directed to the broadcast address. |
1.3.6.1.4.1.81.12.3.1.1.37 | ethPortMulticastPkts | 0 | 0 | The total number of good packets received that were directed to a multicast address. Note that this number does not include pack… |