Defines the Configuration Symbol of the Upper Backplane
X.Y - where X & Y are integers:
1st byte (X) - Major version number
2nd byte - '.'
3rd byte (Y) - minor version number
The hardware supports 2 bits for this purpose (D10, E10 LSB).
Y will always be 0.
X will change according to the HW registers.
00 is CS 1.0, 01 is 2.0, 10 is 3.0, 11 is 4.0.
If no upper backplane is installed in the chassis, an empty string
will be returned.
Parsed from file Mritag.mib.txt
Company: None
Module: MERITAGE-MIB
Defines the Configuration Symbol of the Upper Backplane
X.Y - where X & Y are integers:
1st byte (X) - Major version number
2nd byte - '.'
3rd byte (Y) - minor version number
The hardware supports 2 bits for this purpose (D10, E10 LSB).
Y will always be 0.
X will change according to the HW registers.
00 is CS 1.0, 01 is 2.0, 10 is 3.0, 11 is 4.0.
If no upper backplane is installed in the chassis, an empty string
will be returned.
Parsed from file MERITAGE-MIB.mib
Module: MERITAGE-MIB
Vendor: Lannet Company
Module: MERITAGE-MIB
[Automatically extracted from oidview.com]
meritageBaseUpBckplnConfigurationSymbol OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Defines the Configuration Symbol of the Upper Backplane X.Y - where X & Y are integers: 1st byte (X) - Major version number 2nd byte - '.' 3rd byte (Y) - minor version number The hardware supports 2 bits for this purpose (D10, E10 LSB). Y will always be 0. X will change according to the HW registers. 00 is CS 1.0, 01 is 2.0, 10 is 3.0, 11 is 4.0. If no upper backplane is installed in the chassis, an empty string will be returned. " ::= { meritageBase 8 }
meritageBaseUpBckplnConfigurationSymbol OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Defines the Configuration Symbol of the Upper Backplane X.Y - where X & Y are integers: 1st byte (X) - Major version number 2nd byte - '.' 3rd byte (Y) - minor version number The hardware supports 2 bits for this purpose (D10, E10 LSB). Y will always be 0. X will change according to the HW registers. 00 is CS 1.0, 01 is 2.0, 10 is 3.0, 11 is 4.0. If no upper backplane is installed in the chassis, an empty string will be returned. " ::= { meritageBase 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.81.32.1.8.0 | meritageBaseUpBckplnConfigurationSymbol | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.81.32.1.1 | meritageBaseLEDs | 1 | 1 | Summary of the hub LEDs. The coding of each LED is defined in meritageLedColour Number of bits per LED, currently 8 (1st byte) Num… |
| 1.3.6.1.4.1.81.32.1.2 | meritageBaseTemperatureExceed | 1 | 1 | Fault condition indicating that the temperature exceeded 70 degrees in at least one of the modules in the hub. |
| 1.3.6.1.4.1.81.32.1.3 | meritageBaseXswitchConfiguration | 1 | 1 | The value of this attribute shows whether the two horizontal Xswitches are connected internally to form a single 14-slots-wide Xs… |
| 1.3.6.1.4.1.81.32.1.4 | meritageBaseFaultMask | 1 | 1 | Each bit of this item describes a fault situation in the Meritage hub. bit 1: meritageBaseFanActivityStatus.1 = failed (2), bit 2… |
| 1.3.6.1.4.1.81.32.1.5 | meritageBaseFanTable | 1 | 3 | Table of attributes for Fan units in the Meritage. |
| 1.3.6.1.4.1.81.32.1.6 | meritageBasePSUTable | 1 | 6 | Table of configuration attributes for the Power Supply Units. |
| 1.3.6.1.4.1.81.32.1.7 | meritageBaseUpBckplnConfiguration | 1 | 1 | Defines whether the Upper Backplane is constructed as a single domain (full), as a dual domain (split) or not installed. The hard… |