The value in seconds of Wait Time to Restore.
The time the M-SPS software will wait before restoring a healthy higher
priority timing source as the sync source.
This is to prevent toggling between two sources if one source is
intermittently bad.
If the WTR is set to infinity, a higher priority source will be active
only if the current source fails or after reset.
ranges 10-3600 seconds
value = 9999 means infinity.
default value - 20 sec.
Parsed from file Mritag.mib.txt
Company: None
Module: MERITAGE-MIB
The value in seconds of Wait Time to Restore.
The time the M-SPS software will wait before restoring a healthy higher
priority timing source as the sync source.
This is to prevent toggling between two sources if one source is
intermittently bad.
If the WTR is set to infinity, a higher priority source will be active
only if the current source fails or after reset.
ranges 10-3600 seconds
value = 9999 means infinity.
default value - 20 sec.
Parsed from file MERITAGE-MIB.mib
Module: MERITAGE-MIB
Vendor: Lannet Company
Module: MERITAGE-MIB
[Automatically extracted from oidview.com]
meritageClockWTR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value in seconds of Wait Time to Restore. The time the M-SPS software will wait before restoring a healthy higher priority timing source as the sync source. This is to prevent toggling between two sources if one source is intermittently bad. If the WTR is set to infinity, a higher priority source will be active only if the current source fails or after reset. ranges 10-3600 seconds value = 9999 means infinity. default value - 20 sec. " ::= { meritageClock 3 }
meritageClockWTR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value in seconds of Wait Time to Restore. The time the M-SPS software will wait before restoring a healthy higher priority timing source as the sync source. This is to prevent toggling between two sources if one source is intermittently bad. If the WTR is set to infinity, a higher priority source will be active only if the current source fails or after reset. ranges 10-3600 seconds value = 9999 means infinity. default value - 20 sec. " ::= { meritageClock 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.81.32.4.3.0 | meritageClockWTR | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.81.32.4.1 | meritageClockAdminStatus | 1 | 1 | enable or disable the clock sync daughter board. When disabled, the M-SPS will use its own internal clock. |
| 1.3.6.1.4.1.81.32.4.2 | meritageClockReset | 1 | 1 | Setting the value of this attribute to ON causes a reset only to the Clock Sync daughter board and not to the M-SPS. |
| 1.3.6.1.4.1.81.32.4.4 | meritageClockStatus | 1 | 1 | The status of the Clock Sync daughter board: Locked - locked to the input timing source for more then 8 seconds. Holdover - Tryin… |
| 1.3.6.1.4.1.81.32.4.5 | meritageClockCurrentSource | 1 | 1 | The current clock source being used. This is the outcome of the status of the sources and the priority between the sources. possi… |