Used to configure and monitor one rule.
Use CreateAndWait (4) to create a rule.
Destroy (6) to destroy a rule
active (1) is returned when a rule is complete and is configured
into device HW
NotReady (3) is returned when not all mandatory fields in the
rule have been configured or the rule is not valid.
Not In Service (2) is returned when the rule is not active
because the list is not active or device lacks resources
to support the rule
Parsed from file xylan-policy.mib.txt
Company: None
Module: POLICY-MIB
Used to configure and monitor one rule.
Use CreateAndWait (4) to create a rule.
Destroy (6) to destroy a rule
active (1) is returned when a rule is complete and is configured
into device HW
NotReady (3) is returned when not all mandatory fields in the
rule have been configured or the rule is not valid.
Not In Service (2) is returned when the rule is not active
because the list is not active or device lacks resources
to support the rule
Parsed from file POLICY-MIB.mib
Module: POLICY-MIB
Vendor: Avaya
Module: POLICY-MIB (policy.mib)
Type: TABULAR
Access: read-write
Syntax: RowStatus
Automatically extracted from www.mibdepot.com
ipPolicyRuleStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure and monitor one rule. Use CreateAndWait (4) to create a rule. Destroy (6) to destroy a rule active (1) is returned when a rule is complete and is configured into device HW NotReady (3) is returned when not all mandatory fields in the rule have been configured or the rule is not valid. Not In Service (2) is returned when the rule is not active because the list is not active or device lacks resources to support the rule" ::= { ipPolicyRuleEntry 19}
ipPolicyRuleStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure and monitor one rule. Use CreateAndWait (4) to create a rule. Destroy (6) to destroy a rule active (1) is returned when a rule is complete and is configured into device HW NotReady (3) is returned when not all mandatory fields in the rule have been configured or the rule is not valid. Not In Service (2) is returned when the rule is not active because the list is not active or device lacks resources to support the rule" ::= { ipPolicyRuleEntry 19}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.81.36.2.1.1 | ipPolicyRuleSlot | 0 | 0 | The slot-id (AKA module-id / box number) to which this rule relates |
1.3.6.1.4.1.81.36.2.1.2 | ipPolicyRuleListID | 0 | 0 | The ID of the list this rule is part of. Lists 150-199 are for RNR use. |
1.3.6.1.4.1.81.36.2.1.3 | ipPolicyRuleID | 0 | 0 | Number of rule within its list. Each list may contain many rule. Lists work in a First Match manner. A rule with a lower ID woul… |
1.3.6.1.4.1.81.36.2.1.4 | ipPolicyRuleSrcAddr | 0 | 0 | The IP address of the source station. A value of 255.255.255.255 in ipPolicyRuleSrcAddrWild indicates this is a DON'T CARE field. |
1.3.6.1.4.1.81.36.2.1.5 | ipPolicyRuleSrcAddrWild | 0 | 0 | This field specifies the wildcard of the source IP address. Note that a the mask for a single host is 0.0.0.0 and the mask for a… |
1.3.6.1.4.1.81.36.2.1.6 | ipPolicyRuleDstAddr | 0 | 0 | The IP address of the destination station. A value of 255.255.255.255 in ipPolicyRuleDstAddrWild indicates this is a DON'T CARE f… |
1.3.6.1.4.1.81.36.2.1.7 | ipPolicyRuleDstAddrWild | 0 | 0 | This field specifies the wildcard of the destination IP address. Note that a the mask for a single host is 0.0.0.0 and the mask … |
1.3.6.1.4.1.81.36.2.1.8 | ipPolicyRuleProtocol | 0 | 0 | The IP protocol to which this rule relates. Use 256 to specify IP (i.e. don't care) |
1.3.6.1.4.1.81.36.2.1.9 | ipPolicyRuleL4SrcPortMin | 0 | 0 | The minimal source port number. This fields is applicable only when ipPolicyRuleProtocol is TCP(6) UDP(17). In all other cases it… |
1.3.6.1.4.1.81.36.2.1.10 | ipPolicyRuleL4SrcPortMax | 0 | 0 | The maximal source port number. This fields is applicable only when ipPolicyRuleProtocol is TCP(6) or UDP(17). In all other cases… |
1.3.6.1.4.1.81.36.2.1.11 | ipPolicyRuleL4DestPortMin | 0 | 0 | The minimal destination port number. This fields is applicable only when ipPolicyRuleProtocol is TCP(6) or UDP(17). In all other … |
1.3.6.1.4.1.81.36.2.1.12 | ipPolicyRuleL4DestPortMax | 0 | 0 | The maximal destination port number. This fields is applicable only when ipPolicyRuleProtocol is TCP(6) or UDP(17). In all other … |
1.3.6.1.4.1.81.36.2.1.13 | ipPolicyRuleEstablished | 0 | 0 | This field indicates the value of the established bit in the TCP header. If protocol is not TCP this values is not used. |
1.3.6.1.4.1.81.36.2.1.14 | ipPolicyRuleOperation | 0 | 0 | The operation that should be applied to a packet in case the packet matches the rule. Some of the values are Access Control oper… |
1.3.6.1.4.1.81.36.2.1.15 | ipPolicyRuleApplicabilityPrecedence | 0 | 0 | This field indicates how important is it to enforce this rule. The higher the number the more important it is to enforce this ru… |
1.3.6.1.4.1.81.36.2.1.16 | ipPolicyRuleApplicabilityStatus | 0 | 0 | Used to monitor if a rule is currently applicable (for the active list) or would be applicable (if the list becomes active). The … |
1.3.6.1.4.1.81.36.2.1.17 | ipPolicyRuleApplicabilityType | 0 | 0 | Used to monitor the ApplicabilityStatus of the rule in the context of this list. The values returned for this MIB are not affect… |
1.3.6.1.4.1.81.36.2.1.18 | ipPolicyRuleErrMsg | 0 | 0 | Free text describing the reason why the rule is not Applicable. When rule is Applicable returns NULL string. The values returned … |
1.3.6.1.4.1.81.36.2.1.20 | ipPolicyRuleDSCPOperation | 0 | 0 | The New DSCP value that should be applied to packets that meatch this rule. A value of 64 means no change. |