An entry in the table, containing data about a single port.
Parsed from file Config.mib.txt
Company: None
Module: CONFIG-MIB
An entry in the table, containing data about a single port.
Parsed from file CONFIG-MIB.mib
Module: CONFIG-MIB
Vendor: Avaya
Module: CONFIG-MIB (Config.mib)
Type: ENTRY
Access: not-accessible
Syntax: GenPortEntry
Automatically extracted from www.mibdepot.com
genPortEntry OBJECT-TYPE SYNTAX GenPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing data about a single port." INDEX { genPortGroupId, genPortId } ::= { genPortTable 1 }
genPortEntry OBJECT-TYPE SYNTAX GenPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing data about a single port." INDEX { genPortGroupId, genPortId } ::= { genPortTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.81.9.1.1.1 | genPortGroupId | 0 | 0 | Index which identifies the group inside the chassis for which this entry contains information. Equals the number of the slot by … |
| 1.3.6.1.4.1.81.9.1.1.2 | genPortId | 0 | 0 | Index which identifies the port inside the group for which this entry contains information. It generally corresponds with the nu… |
| 1.3.6.1.4.1.81.9.1.1.3 | genPortFunctionality | 0 | 0 | Describes the functionality of the port according to international standards. |
| 1.3.6.1.4.1.81.9.1.1.4 | genPortType | 0 | 0 | Attribute describing the type of port. |
| 1.3.6.1.4.1.81.9.1.1.5 | genPortDescr | 0 | 0 | Descriptor of the port in ASCII (readable) format, mainly for use with generic management applications. |
| 1.3.6.1.4.1.81.9.1.1.6 | genPortActivityStatus | 0 | 0 | This attribute defines the status of ports that may be part of a redundancy scheme. notActive(1) - indicates a disabled port whi… |
| 1.3.6.1.4.1.81.9.1.1.7 | genPortSecurityPolicy | 0 | 0 | Security policy (noPolicy or Trap Only or Trap and Close) assigned to this port. noPolicy - do not perform intrusion control sec… |
| 1.3.6.1.4.1.81.9.1.1.8 | genPortSecureAddresses | 0 | 0 | This attribute defines the security information (physical addresses) relevant for the entry. Coded in internal format, cryptogra… |
| 1.3.6.1.4.1.81.9.1.1.9 | genPortIntPortConnection | 0 | 0 | The value of this attribute defines the internal port to which the port is connected. A value 0 of this attribute would indicate… |
| 1.3.6.1.4.1.81.9.1.1.10 | genPortAdminStatus | 0 | 0 | A disabled port neither transmits nor receives. The port must be explicitly enabled to restore operation. For token ring ports, … |
| 1.3.6.1.4.1.81.9.1.1.11 | genPortSpecificOID | 0 | 0 | This attribute provides the OID of another group containing additional more specific information regarding this instance. |
| 1.3.6.1.4.1.81.9.1.1.12 | genPortThresholdStatus | 0 | 0 | This item is a bitmap that defines the threshold status of the port, in relation to the alarmPolicyTable. If the port is monitore… |
| 1.3.6.1.4.1.81.9.1.1.13 | genPortEavesdropping | 0 | 0 | Eavesdropping security mechanism (Off or On) assigned to this port. On - perform Eavesdropping security mechanism in the port. Th… |
| 1.3.6.1.4.1.81.9.1.1.14 | genPortFaultMask | 0 | 0 | Each bit of this item describes the situation of the port regarding specific fault. For example: bit 1: on indicates 'port autopa… |
| 1.3.6.1.4.1.81.9.1.1.15 | genPortSWRdFault | 0 | 0 | Attribute that reports to the Agent of any fault occurs in the port for the Soft Redundancy application |
| 1.3.6.1.4.1.81.9.1.1.16 | genPortActivation | 0 | 0 | A disabled port neither transmits nor receives. The port must be Explicitly enabled to restore operation. |
| 1.3.6.1.4.1.81.9.1.1.17 | genPortFunctionalStatus | 0 | 0 | The functional status of the port: ok(1) - fully functional port, transmitting and receiving packets. rld(2) - receive link down … |
| 1.3.6.1.4.1.81.9.1.1.18 | genPortIfMap | 0 | 0 | This MIB object defines the mapping of the LANNET box port to a MIB-II interface. If the port corresponds to a stack of interfac… |
| 1.3.6.1.4.1.81.9.1.1.19 | genPortVLANMode | 0 | 0 | This item defines the VLAN operation mode of the port: perPortOnly(1) - indicates that all received packets are mapped to the VL… |
| 1.3.6.1.4.1.81.9.1.1.20 | genPortAdminPermission | 0 | 0 | This item defines whether or not the Agent is permitted to change a Port Status from Disable to Enable. Permit(1) - The agent is … |
| 1.3.6.1.4.1.81.9.1.1.21 | genPortName | 0 | 0 | Name of the port in ASCII format, mainly filled by network managers for easily recognize the specific use of a switched port. |
| 1.3.6.1.4.1.81.9.1.1.22 | genPortClassification | 0 | 0 | Classification assigned to this port. regular - this port is connected to regular stations. Topology changes that may occur on it… |
| 1.3.6.1.4.1.81.9.1.1.23 | genPortVLANBindingMode | 0 | 0 | VLAN binding mode assigned to this port. static - this port supports only the egress VLAN list as configured manually in its cor… |