The global UPS status is returned. Every bit reflects a specific
status condition. Unused bits returns as 0. The status value can
also be found on other commands. The value SNMP_NOSUCHNAME means
'invalid status' or 'status value non available'.
Status 1 0001h upsStatusEcomodeIsOn
2 0002h upsStatusBatteryIsCharging
4 0004h upsStatusBatteryIsDischarging
8 0008h upsStatusAlarmIsActive
16 0010h upsStatusRectifierIsOn
32 0020h upsStatusLowBattery
64 0040h upsStatusOnBypass
128 0080h upsStatusMainsBypassOK
256 0100h upsStatusMainsRectifierOK
512 0200h upsStatusDetourIsOn
1024 0400h upsStatusAcousticAlarmIsOn
2048 0800h - (not used.)
4096 1000h upsStatusInverterIsOn
8192 2000h upsStatusNotInParallel (Q1 open)
16384 4000h upsStatusResetLoadOff
32768 8000h upsStatusLoadOff
Parsed from file GE_PARALLELUPS.mib.txt
Company: ge
Module: GE_PARALLELUPS
Vendor: IMV Victron bv
Module: GE_PARALLELUPS
[Automatically extracted from oidview.com]
upsStatus_first OBJECT-TYPE SYNTAX NonNegativeInteger32 MAX-ACCESS read-only STATUS current DESCRIPTION "The global UPS status is returned. Every bit reflects a specific status condition. Unused bits returns as 0. The status value can also be found on other commands. The value SNMP_NOSUCHNAME means 'invalid status' or 'status value non available'. Status 1 0001h upsStatusEcomodeIsOn 2 0002h upsStatusBatteryIsCharging 4 0004h upsStatusBatteryIsDischarging 8 0008h upsStatusAlarmIsActive 16 0010h upsStatusRectifierIsOn 32 0020h upsStatusLowBattery 64 0040h upsStatusOnBypass 128 0080h upsStatusMainsBypassOK 256 0100h upsStatusMainsRectifierOK 512 0200h upsStatusDetourIsOn 1024 0400h upsStatusAcousticAlarmIsOn 2048 0800h - (not used.) 4096 1000h upsStatusInverterIsOn 8192 2000h upsStatusNotInParallel (Q1 open) 16384 4000h upsStatusResetLoadOff 32768 8000h upsStatusLoadOff " ::= { upsGetSet_first 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.818.1.1.11.10.12.0 | 0 | 0 | 0 | upsStatus_first |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.818.1.1.11.10.1 | upsEventGetNext_first | 1 | 1 | The number of events to retreive from the UPS event buffer. When this object is set the EventTable will be filled with the reques… |
| 1.3.6.1.4.1.818.1.1.11.10.2 | upsEventGetPrevious_first | 1 | 1 | The number of events to retreive from the UPS event buffer. When this object is set the EventTable will be filled with the reques… |
| 1.3.6.1.4.1.818.1.1.11.10.3 | upsEventSetStartingTimeStamp_first | 1 | 1 | The timestamp which is used as starting point for downloading events from the UPS event buffer |
| 1.3.6.1.4.1.818.1.1.11.10.4 | upsEventRetreiveCurrentTimeStamp_first | 1 | 1 | The current timestamp is retreived from the UPS |
| 1.3.6.1.4.1.818.1.1.11.10.5 | upsEventTableSize_first | 1 | 1 | The number of entries in the event table. This object indicates the number of rows in the event table. |
| 1.3.6.1.4.1.818.1.1.11.10.6 | upsEventTable_first | 1 | 5 | A list of event table entries. The number of entries is always 10, and the value of upsEventTableSize gives the number of valid… |
| 1.3.6.1.4.1.818.1.1.11.10.7 | upsParametersRead_first | 1 | 1 | The number of parameters to retreive from the UPS. When this object is set the ParameterTable will be filled with the requested n… |
| 1.3.6.1.4.1.818.1.1.11.10.8 | upsParametersWrite_first | 1 | 1 | The number of parameters to write to the UPS. When this object is set the ParameterTable will be send to the ups. The value upsPa… |
| 1.3.6.1.4.1.818.1.1.11.10.9 | upsParametersStartAddress_first | 1 | 1 | The address which is used as starting point for downloading parameters from the UPS |
| 1.3.6.1.4.1.818.1.1.11.10.10 | upsParameterTableSize_first | 1 | 1 | The number of entries in the parameter table. This object indicates the number of rows in the parameter table. |
| 1.3.6.1.4.1.818.1.1.11.10.11 | upsParameterTable_first | 1 | 3 | A list of parameter entries. The number of entries is always 16, and the value of upsParameterTableSize gives the number of vali… |
| 1.3.6.1.4.1.818.1.1.11.10.13 | upsMainsStatisticsMBfail_first | 1 | 1 | Count of main bypass failures (>200 ms), since UPS installation. |
| 1.3.6.1.4.1.818.1.1.11.10.14 | upsMainsStatisticsMRfail_first | 1 | 1 | Count of mains rectifier failures (>200 ms), since UPS installation. |
| 1.3.6.1.4.1.818.1.1.11.10.15 | upsMainsStatisticsB2_first | 1 | 1 | Count of transients on the mains bypass (0..2 ms), during the last 7 days. |
| 1.3.6.1.4.1.818.1.1.11.10.16 | upsMainsStatisticsB5_first | 1 | 1 | Count of transients on the mains bypass (2..5 ms), during the last 7 days. |
| 1.3.6.1.4.1.818.1.1.11.10.17 | upsMainsStatisticsB10_first | 1 | 1 | Count of transients on the mains bypass (5..10 ms), during the last 7 days. |
| 1.3.6.1.4.1.818.1.1.11.10.18 | upsMainsStatisticsB200_first | 1 | 1 | Count of transients on the mains bypass (10..200 ms), during the last 7 days. |
| 1.3.6.1.4.1.818.1.1.11.10.19 | upsMainsStatisticsBypRel_first | 1 | 1 | Bypass reliability degree [0..100%;255]. The value NOSUCHNAME means 'not available'. |
| 1.3.6.1.4.1.818.1.1.11.10.20 | upsTime_first | 1 | 1 | The current timestamp (or real-time) of the UPS. For the format, see 'Timestamp' specifications. The write-command has to comply… |
| 1.3.6.1.4.1.818.1.1.11.10.21 | upsRequestPermission_first | 1 | 1 | An encrypted code is send to enable use of restricted write objects during a limited period of time. |
| 1.3.6.1.4.1.818.1.1.11.10.22 | upsEventGetCode_first | 1 | 1 | The code which is used as starting point to downloading the events from the UPS event buffer. |
| 1.3.6.1.4.1.818.1.1.11.10.23 | upsEventSpinLock_first | 1 | 1 | A spin lock on the event subsystem. |
| 1.3.6.1.4.1.818.1.1.11.10.24 | upsParameterSpinLock_first | 1 | 1 | A spin lock on the parameters subsystem. |