The current timestamp (or real-time) of the UPS. For the format,
see 'Timestamp' specifications. The write-command has to comply with the
correct timestamp format expected by the UPS (counter value or real-time-clock
value). Missing to doing so will result in a SNMP_secondERROR, meaning 'command not supported'. It is possible to know which is the timestamp
format supported by the UPS, by issuing a read-command or by reading events,
which includes timestamps.
Parsed from file GE_PARALLELUPS.mib.txt
Company: ge
Module: GE_PARALLELUPS
Vendor: IMV Victron bv
Module: GE_PARALLELUPS
[Automatically extracted from oidview.com]
upsTime_second OBJECT-TYPE SYNTAX NonNegativeInteger32 MAX-ACCESS read-write STATUS current DESCRIPTION "The current timestamp (or real-time) of the UPS. For the format, see 'Timestamp' specifications. The write-command has to comply with the correct timestamp format expected by the UPS (counter value or real-time-clock value). Missing to doing so will result in a SNMP_secondERROR, meaning 'command not supported'. It is possible to know which is the timestamp format supported by the UPS, by issuing a read-command or by reading events, which includes timestamps." ::= { upsGetSet_second 20 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.818.1.1.12.10.20.0 | 0 | 0 | 0 | upsTime_second |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.818.1.1.12.10.1 | upsEventGetNext_second | 1 | 1 | The number of events to retreive from the UPS event buffer. When this object is set the EventTable will be filled with the reques… |
| 1.3.6.1.4.1.818.1.1.12.10.2 | upsEventGetPrevious_second | 1 | 1 | The number of events to retreive from the UPS event buffer. When this object is set the EventTable will be filled with the reques… |
| 1.3.6.1.4.1.818.1.1.12.10.3 | upsEventSetStartingTimeStamp_second | 1 | 1 | The timestamp which is used as starting point for downloading events from the UPS event buffer |
| 1.3.6.1.4.1.818.1.1.12.10.4 | upsEventRetreiveCurrentTimeStamp_second | 1 | 1 | The current timestamp is retreived from the UPS |
| 1.3.6.1.4.1.818.1.1.12.10.5 | upsEventTableSize_second | 1 | 1 | The number of entries in the event table. This object indicates the number of rows in the event table. |
| 1.3.6.1.4.1.818.1.1.12.10.6 | upsEventTable_second | 1 | 5 | A list of event table entries. The number of entries is always 10, and the value of upsEventTableSize gives the number of valid… |
| 1.3.6.1.4.1.818.1.1.12.10.7 | upsParametersRead_second | 1 | 1 | The number of parameters to retreive from the UPS. When this object is set the ParameterTable will be filled with the requested n… |
| 1.3.6.1.4.1.818.1.1.12.10.8 | upsParametersWrite_second | 1 | 1 | The number of parameters to write to the UPS. When this object is set the ParameterTable will be send to the ups. The value upsPa… |
| 1.3.6.1.4.1.818.1.1.12.10.9 | upsParametersStartAddress_second | 1 | 1 | The address which is used as starting point for downloading parameters from the UPS |
| 1.3.6.1.4.1.818.1.1.12.10.10 | upsParameterTableSize_second | 1 | 1 | The number of entries in the parameter table. This object indicates the number of rows in the parameter table. |
| 1.3.6.1.4.1.818.1.1.12.10.11 | upsParameterTable_second | 1 | 3 | A list of parameter entries. The number of entries is always 16, and the value of upsParameterTableSize gives the number of vali… |
| 1.3.6.1.4.1.818.1.1.12.10.12 | upsStatus_second | 1 | 1 | The global UPS status is returned. Every bit reflects a specific status condition. Unused bits returns as 0. The status value ca… |
| 1.3.6.1.4.1.818.1.1.12.10.13 | upsMainsStatisticsMBfail_second | 1 | 1 | Count of main bypass failures (>200 ms), since UPS installation. |
| 1.3.6.1.4.1.818.1.1.12.10.14 | upsMainsStatisticsMRfail_second | 1 | 1 | Count of mains rectifier failures (>200 ms), since UPS installation. |
| 1.3.6.1.4.1.818.1.1.12.10.15 | upsMainsStatisticsB2_second | 1 | 1 | Count of transients on the mains bypass (0..2 ms), during the last 7 days. |
| 1.3.6.1.4.1.818.1.1.12.10.16 | upsMainsStatisticsB5_second | 1 | 1 | Count of transients on the mains bypass (2..5 ms), during the last 7 days. |
| 1.3.6.1.4.1.818.1.1.12.10.17 | upsMainsStatisticsB10_second | 1 | 1 | Count of transients on the mains bypass (5..10 ms), during the last 7 days. |
| 1.3.6.1.4.1.818.1.1.12.10.18 | upsMainsStatisticsB200_second | 1 | 1 | Count of transients on the mains bypass (10..200 ms), during the last 7 days. |
| 1.3.6.1.4.1.818.1.1.12.10.19 | upsMainsStatisticsBypRel_second | 1 | 1 | Bypass reliability degree [0..100%;255]. The value NOSUCHNAME means 'not available'. |
| 1.3.6.1.4.1.818.1.1.12.10.21 | upsRequestPermission_second | 1 | 1 | An encrypted code is send to enable use of restricted write objects during a limited period of time. |
| 1.3.6.1.4.1.818.1.1.12.10.22 | upsEventGetCode_second | 1 | 1 | The code which is used as starting point to downloading the events from the UPS event buffer. |
| 1.3.6.1.4.1.818.1.1.12.10.23 | upsEventSpinLock_second | 1 | 1 | A spin lock on the event subsystem. |
| 1.3.6.1.4.1.818.1.1.12.10.24 | upsParameterSpinLock_second | 1 | 1 | A spin lock on the parameters subsystem. |