Dis- or enable 'no load' shutdown from the contact interface.
Parsed from file GE_PARALLELUPS.mib.txt
Company: ge
Module: GE_PARALLELUPS
Vendor: IMV Victron bv
Module: GE_PARALLELUPS
[Automatically extracted from oidview.com]
upsConfigNoLoadShutdown_second OBJECT-TYPE SYNTAX Integer32 { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Dis- or enable 'no load' shutdown from the contact interface." ::= { upsConfig_second 13 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.818.1.1.12.9.13.0 | 0 | 0 | 0 | upsConfigNoLoadShutdown_second |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.818.1.1.12.9.1 | upsConfigInputVoltage_second | 1 | 1 | The magnitude of the nominal input voltage. On those systems which support read-write access to this object, if there is an atte… |
1.3.6.1.4.1.818.1.1.12.9.2 | upsConfigInputFreq_second | 1 | 1 | The nominal input frequency. On those systems which support read-write access to this object, if there is an attempt to set this… |
1.3.6.1.4.1.818.1.1.12.9.3 | upsConfigOutputVoltage_second | 1 | 1 | The magnitude of the nominal output voltage. On those systems which support read-write access to this object, if there is an att… |
1.3.6.1.4.1.818.1.1.12.9.4 | upsConfigOutputFreq_second | 1 | 1 | The nominal output frequency. On those systems which support read-write access to this object, if there is an attempt to set thi… |
1.3.6.1.4.1.818.1.1.12.9.5 | upsConfigOutputVA_second | 1 | 1 | The magnitude of the nominal Volt-Amp rating.(*) |
1.3.6.1.4.1.818.1.1.12.9.6 | upsConfigOutputPower_second | 1 | 1 | The magnitude of the nominal true power rating.(*) |
1.3.6.1.4.1.818.1.1.12.9.7 | upsConfigLowBattTime_second | 1 | 1 | The value of upsEstimatedMinutesRemaining at which a lowBattery condition is declared. For agents which support only discrete (d… |
1.3.6.1.4.1.818.1.1.12.9.8 | upsConfigAudibleStatus_second | 1 | 1 | The requested state of the audible alarm. When in the disabled state, the audible alarm should never sound. The enabled state i… |
1.3.6.1.4.1.818.1.1.12.9.9 | upsConfigLowVoltageTransferPoint_second | 1 | 1 | The minimum input line voltage allowed before the UPS system transfers to battery backup.(*) |
1.3.6.1.4.1.818.1.1.12.9.10 | upsConfigHighVoltageTransferPoint_second | 1 | 1 | The maximum line voltage allowed before the UPS system transfers to battery backup.(*) |
1.3.6.1.4.1.818.1.1.12.9.11 | upsConfigBatteryCapacity_second | 1 | 1 | The installed battery capacity. This value is the 'factory'-value, not the value after calibration. |
1.3.6.1.4.1.818.1.1.12.9.12 | upsConfigBatteryChargeCurrent_second | 1 | 1 | The maximum battery charge current, including external chargers. |
1.3.6.1.4.1.818.1.1.12.9.14 | upsConfigStartDelay_second | 1 | 1 | Minimum required autonomy time before the UPS may perform an autorestart. |