This parameter represents the name of the BSU for which it can
register. This configuration is valid only on SU. If this
field is empty then SU is allowed to register with any BSU.
Parsed from file PROXIM-MIB.mib
Module: PROXIM-MIB
Vendor: Proxim Wireless, Inc
Module: PROXIM-MIB
[Automatically extracted from oidview.com]
wirelessIfWORPBaseStationName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter represents the name of the BSU for which it can register. This configuration is valid only on SU. If this field is empty then SU is allowed to register with any BSU." ::= { wirelessIfWORPTableEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.1 | wirelessIfWORPTableIndex | 0 | 0 | This parameter represents the radio for which the WORP is enabled and index to the wirelessIfWORPTable. |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.2 | wirelessIfWORPMode | 0 | 0 | This parameter displays the worp mode of operation. |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.4 | wirelessIfWORPNetworkName | 0 | 0 | This parameter represents the name of the Network of the WORP Interface. |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.5 | wirelessIfWORPMaxSatellites | 0 | 0 | This parameter represents the maximum number of SUs allowed to register on this BSU. This configuration is valid only on BSU. |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.6 | wirelessIfWORPMTU | 0 | 0 | This parameter represents to maximum size of a frame sent from the WORP interface. |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.7 | wirelessIfWORPSuperPacketing | 0 | 0 | This parameter represents the status of bundling multiple ethernet frames in one single WORP Jumbo frame |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.8 | wirelessIfWORPSleepMode | 0 | 0 | This parameter represents the status of sleep mode. This Configuration is valid only on BSU. If there is no data available to tr… |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.9 | wirelessIfWORPMultiFrameBursting | 0 | 0 | This parameter enables WORP protocol to allow each side, BSU or SU, to send a burst of multiple data messages instead of a singl… |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.11 | wirelessIfWORPRegistrationTimeout | 0 | 0 | This parameter represents the registration procedure timeout period for WORP interface. |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.12 | wirelessIfWORPRetries | 0 | 0 | This parameter represents the number of times the same worp frame need to be re-Transmitted, if it is not acknowledged by the pe… |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.13 | wirelessIfWORPTxRate | 0 | 0 | This parameter represents the WORP interface transmission rate. Please check the object wirelessIfWORPSupportedTxRate for suppor… |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.14 | wirelessIfWORPSupportedTxRate | 0 | 0 | This parameter displays the supported transmission rate based on Channel Bandwdith, Guard Interval and Number of Spacial Streams… |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.15 | wirelessIfWORPInputBandwidthLimit | 0 | 0 | This parameters represents the Bandwidth limit on Input direction. Default limit & maximum limit are based on the license file. |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.16 | wirelessIfWORPOutputBandwidthLimit | 0 | 0 | This parameter represents the Bandwidth limit on Output direction. Default limit & maximum limit are based on the license file. |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.17 | wirelessIfWORPBandwidthLimitType | 0 | 0 | This parameter represents the bandwidth limit type - shaping or policing. |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.18 | wirelessIfWORPSecurityProfileIndex | 0 | 0 | This parameter allows to configure the Security profile for the WORP interface based on the index of the profile name and this is… |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.19 | wirelessIfWORPRadiusProfileIndex | 0 | 0 | This parameter allows to configure the Radius profile for the WORP interface based on the index of the profile name and this is V… |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.20 | wirelessIfWORPMACACLStatus | 0 | 0 | This parameter is used to enable or disable the MAC access control list. This configuration is Valid only on BSU. |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.21 | wirelessIfWORPRadiusMACACLStatus | 0 | 0 | This parameter is used to enable or disable the MAC ACL for Radius Profiles. This configuration is Valid only on BSU. |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.22 | wirelessIfWORPRadiusAccStatus | 0 | 0 | This parameter is used to enable or disable the Radius Accounting Stats capture. This configuration is Valid only on BSU and cur… |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.23 | wirelessIfWORPIntfMacAddress | 0 | 0 | This parameter represents the MAC address of the wireless interface card. |
| 1.3.6.1.4.1.841.1.1.1.1.1.4.1.24 | wirelessIfWORPAutoMultiFrameBursting | 0 | 0 | This parameter enables WORP protocol to allow each side, BSU or SU, to send a burst of multiple data messages based on QOS prior… |