The character used by the local Telnet implementation
to pad transmitted data immediately following a carriage
return. A value of 0 indicates that the character is
disabled.
Parsed from file vcppriv2.txt
Company: None
Module: VCP-PRIVATE-MIB-VER-2
The character used by the local Telnet implementation
to pad transmitted data immediately following a carriage
return. A value of 0 indicates that the character is
disabled.
Parsed from file VCP-PRIVATE-MIB-VER-2.mib
Module: VCP-PRIVATE-MIB-VER-2
Vendor: Datability Software Systems
Module: VCP-PRIVATE-MIB-VER-2
[Automatically extracted from oidview.com]
vTelSessPadChar OBJECT-TYPE SYNTAX Character ACCESS read-write STATUS mandatory DESCRIPTION "The character used by the local Telnet implementation to pad transmitted data immediately following a carriage return. A value of 0 indicates that the character is disabled." ::= { vTelSessEntry 12 }
vTelSessPadChar OBJECT-TYPE SYNTAX Character ACCESS read-write STATUS mandatory DESCRIPTION "The character used by the local Telnet implementation to pad transmitted data immediately following a carriage return. A value of 0 indicates that the character is disabled." ::= { vTelSessEntry 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.85.6.1.1.12.4.1.1 | vTelSessPortIndex | 0 | 0 | The value of vPortIndex for the port to which this session belongs. |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.2 | vTelSessIndex | 0 | 0 | The session index in the context of the port, a non-zero positive integer. Session indexes within a port need not be sequential.… |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.3 | vTelSessOrigin | 0 | 0 | The session's source of establishment. |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.4 | vTelSessState | 0 | 0 | The current state of the session. |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.5 | vTelSessDisconnect | 0 | 0 | A control to terminate the session. In response to a get-request or get-next-request, the agent always returns 'ready(1)' as the… |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.6 | vTelSessLocalAddr | 0 | 0 | The local IP address for this session. This object supplies part of the necessary index information to locate the corresponding … |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.7 | vTelSessLocalTcpPort | 0 | 0 | The local TCP port number for this session. This object supplies part of the necessary index information to locate the correspon… |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.8 | vTelSessRemAddr | 0 | 0 | The remote IP address for this session. This object supplies part of the necessary index information to locate the corresponding… |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.9 | vTelSessRemTcpPort | 0 | 0 | The remote TCP port number for this session. This object supplies part of the necessary index information to locate the correspo… |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.10 | vTelSessCrToNet | 0 | 0 | The character sequence which is sent to the remote node of the session to indicate a carriage return in the data stream. |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.11 | vTelSessCrFromTerm | 0 | 0 | The local character sequence which, when delivered to Telnet for transmission, is interpreted as a carriage return and translated… |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.13 | vTelSessPadLength | 0 | 0 | The number of pad characters inserted into the data stream by the local Telnet implementation immediately following a carriage re… |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.14 | vTelSessUserTimeout | 0 | 0 | The maximum number of seconds Telnet instructs TCP to wait for an acknowledgement before terminating the session. |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.15 | vTelSessKeepalive | 0 | 0 | The number of seconds that the session may remain idle (no characters transmitted or recieved) before a TCP keepalive message is … |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.16 | vTelSessIpTTL | 0 | 0 | The value of the IP time to live on packets transmitted for this session. |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.17 | vTelSessIpPrecedence | 0 | 0 | The value of the IP precedence on packets transmitted for this session. |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.18 | vTelSessEndRecord | 0 | 0 | The local character which, when delivered to Telnet for transmission, is interpreted as an end-of-record character and translated… |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.19 | vTelSessNop | 0 | 0 | The local character which, when delivered to Telnet for transmission, is interpreted as a no-op character and translated to the a… |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.20 | vTelSessDataMark | 0 | 0 | The local character which, when delivered to Telnet for transmission, is interpreted as a data mark character and translated to t… |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.21 | vTelSessBreak | 0 | 0 | The local character which, when delivered to Telnet for transmission, is interpreted as a break character and translated to the a… |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.22 | vTelSessIntProcess | 0 | 0 | The local character which, when delivered to Telnet for transmission, is interpreted as the interrupt process character and trans… |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.23 | vTelSessAbortOutput | 0 | 0 | The local character which, when delivered to Telnet for transmission, is interpreted as the abort output character and translated… |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.24 | vTelSessAttention | 0 | 0 | The local character which, when delivered to Telnet for transmission, is interpreted as the attention character and translated to… |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.25 | vTelSessEraseChar | 0 | 0 | The local character which, when delivered to Telnet for transmission, is interpreted as the backspace character and translated to… |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.26 | vTelSessEraseLine | 0 | 0 | The local character which, when delivered to Telnet for transmission, is interpreted as the erase line character and translated t… |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.27 | vTelSessGoAhead | 0 | 0 | The local character which, when delivered to Telnet for transmission, is interpreted as the go ahead character and translated to … |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.28 | vTelSessNullPass | 0 | 0 | When enabled, null characters received by Telnet immediately following carriage return characters are passed through the data str… |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.29 | vTelSessTermType | 0 | 0 | A text string indicating the currently negotiated terminal type for the session. A zero-length value indicates no terminal type … |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.30 | vTelSessLocalEcho | 0 | 0 | When enabled, the local Telnet will perform local echoing of all data delivered to it for transmission. |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.31 | vTelSessRemoteEcho | 0 | 0 | When enabled, the remote Telnet will perform echoing of all received network data. |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.32 | vTelSessLocalBinary | 0 | 0 | When enabled, the local Telnet will transmit data in binary mode. |
| 1.3.6.1.4.1.85.6.1.1.12.4.1.33 | vTelSessRemoteBinary | 0 | 0 | When enabled, the remote Telnet will transmit data in binary mode. |