The value of this object indicates how this
physical port is used to build an interface (the
interface identifiers are set by the equipment) :
unUsed : this physical port is not used,
ethernetAui : this physical port will support
an ethernet interface with the same
identifier (AUI connector for 10 base 5
ethernet),
ethernet10baseT : this physical port will
support an ethernet interface with the
same identifier (RJ 45 connector for 10
base T ethernet),
ethernetAuto : this physical port will support
an ethernet interface with the same
identifier (automatic detection between 10
base 5 and 10 base T),
line : this physical port will support a serial
line interface with the same identifier
(the characteristics of this serial line
interface are described in fcfLineTable),
isdnBChannel : this physical port will support
a B-channel of an ISDN Basic Rate
Interface,
isdnDChannel : this physical port will support
a D-channel of an ISDN Basic Rate
Interface with the same identifier (the
characteristics of this ISDN BRI are
described in
fcfIsdnBasicRateInterfaceTable).
interUnitLinks : this physical port will
support a UnitLinks Interface,
e1 : this physical port will support a E1
Interface,
ds1 : this physical port will support a DS1
Interface,
isdnPri : this physical port will support a
Primary Rate Interface,
tokenRing : this physical port will support a
token ring Interface,
analogVoiceEM : this physical port will support
a EM analog voice Interface,
analogVoiceFxs : this physical port will
support a Fxs analog voice Interface,
analogVoiceFxo : this physical port will
support a Fxo analog voice Interface,
isdnBri : this physical port will support a
Basic Rate Interface,
Each equipment has its own characteristics and the
building of the interfaces must be done according
to its hardware limitations.
The default value is 'unUsed'.
Parsed from file v42ami1e.mib.txt
Company: None
Module: PCE-MIB
The value of this object indicates how this
physical port is used to build an interface (the
interface identifiers are set by the equipment) :
unUsed : this physical port is not used,
ethernetAui : this physical port will support
an ethernet interface with the same
identifier (AUI connector for 10 base 5
ethernet),
ethernet10baseT : this physical port will
support an ethernet interface with the
same identifier (RJ 45 connector for 10
base T ethernet),
ethernetAuto : this physical port will support
an ethernet interface with the same
identifier (automatic detection between 10
base 5 and 10 base T),
line : this physical port will support a serial
line interface with the same identifier
(the characteristics of this serial line
interface are described in fcfLineTable),
isdnBChannel : this physical port will support
a B-channel of an ISDN Basic Rate
Interface,
isdnDChannel : this physical port will support
a D-channel of an ISDN Basic Rate
Interface with the same identifier (the
characteristics of this ISDN BRI are
described in
fcfIsdnBasicRateInterfaceTable).
interUnitLinks : this physical port will
support a UnitLinks Interface,
e1 : this physical port will support a E1
Interface,
ds1 : this physical port will support a DS1
Interface,
isdnPri : this physical port will support a
Primary Rate Interface,
tokenRing : this physical port will support a
token ring Interface,
analogVoiceEM : this physical port will support
a EM analog voice Interface,
analogVoiceFxs : this physical port will
support a Fxs analog voice Interface,
analogVoiceFxo : this physical port will
support a Fxo analog voice Interface,
isdnBri : this physical port will support a
Basic Rate Interface,
Each equipment has its own characteristics and the
building of the interfaces must be done according
to its hardware limitations.
The default value is 'unUsed'.
Parsed from file PCE-MIB.mib
Module: PCE-MIB
Vendor: Philips Communication d'Entreprise Claude Lubin
Module: PCE-MIB
[Automatically extracted from oidview.com]
fcfInterfaceType OBJECT-TYPE SYNTAX INTEGER { unUsed(1), ethernetAuto(2), ethernet10baseT(3), ethernetAui(4), line(5), isdnBChannel(6), isdnDChannel(7), interUnitLinks(8), e1(9), ds1(10), isdnPri(11), lineorB(12), tokenRing(13) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object indicates how this physical port is used to build an interface (the interface identifiers are set by the equipment) : unUsed : this physical port is not used, ethernetAui : this physical port will support an ethernet interface with the same identifier (AUI connector for 10 base 5 ethernet), ethernet10baseT : this physical port will support an ethernet interface with the same identifier (RJ 45 connector for 10 base T ethernet), ethernetAuto : this physical port will support an ethernet interface with the same identifier (automatic detection between 10 base 5 and 10 base T), line : this physical port will support a serial line interface with the same identifier (the characteristics of this serial line interface are described in fcfLineTable), isdnBChannel : this physical port will support a B-channel of an ISDN Basic Rate Interface, isdnDChannel : this physical port will support a D-channel of an ISDN Basic Rate Interface with the same identifier (the characteristics of this ISDN BRI are described in fcfIsdnBasicRateInterfaceTable). interUnitLinks : this physical port will support a UnitLinks Interface, e1 : this physical port will support a E1 Interface, ds1 : this physical port will support a DS1 Interface, isdnPri : this physical port will support a Primary Rate Interface, tokenRing : this physical port will support a token ring Interface, analogVoiceEM : this physical port will support a EM analog voice Interface, analogVoiceFxs : this physical port will support a Fxs analog voice Interface, analogVoiceFxo : this physical port will support a Fxo analog voice Interface, isdnBri : this physical port will support a Basic Rate Interface, Each equipment has its own characteristics and the building of the interfaces must be done according to its hardware limitations. The default value is 'unUsed'." ::= { fcfPhysicalPortEntry 3 }
fcfInterfaceType OBJECT-TYPE SYNTAX INTEGER { unUsed(1), ethernetAuto(2), ethernet10baseT(3), ethernetAui(4), line(5), isdnBChannel(6), isdnDChannel(7), interUnitLinks(8), e1(9), ds1(10), isdnPri(11), lineorB(12), tokenRing(13) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object indicates how this physical port is used to build an interface (the interface identifiers are set by the equipment) : unUsed : this physical port is not used, ethernetAui : this physical port will support an ethernet interface with the same identifier (AUI connector for 10 base 5 ethernet), ethernet10baseT : this physical port will support an ethernet interface with the same identifier (RJ 45 connector for 10 base T ethernet), ethernetAuto : this physical port will support an ethernet interface with the same identifier (automatic detection between 10 base 5 and 10 base T), line : this physical port will support a serial line interface with the same identifier (the characteristics of this serial line interface are described in fcfLineTable), isdnBChannel : this physical port will support a B-channel of an ISDN Basic Rate Interface, isdnDChannel : this physical port will support a D-channel of an ISDN Basic Rate Interface with the same identifier (the characteristics of this ISDN BRI are described in fcfIsdnBasicRateInterfaceTable). interUnitLinks : this physical port will support a UnitLinks Interface, e1 : this physical port will support a E1 Interface, ds1 : this physical port will support a DS1 Interface, isdnPri : this physical port will support a Primary Rate Interface, tokenRing : this physical port will support a token ring Interface, analogVoiceEM : this physical port will support a EM analog voice Interface, analogVoiceFxs : this physical port will support a Fxs analog voice Interface, analogVoiceFxo : this physical port will support a Fxo analog voice Interface, isdnBri : this physical port will support a Basic Rate Interface, Each equipment has its own characteristics and the building of the interfaces must be done according to its hardware limitations. The default value is 'unUsed'." ::= { fcfPhysicalPortEntry 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.866.20.1.10.1.1.1 | fcfPhysPortId | 0 | 0 | The value of this object identifies one and only one physical port. A physical port has the same number than the physical connect… |
1.3.6.1.4.1.866.20.1.10.1.1.2 | fcfPhysPortConnector | 0 | 0 | The value of this object indicates whether the connector type is Ethernet or DB25 or RJ45. |