The value of this object is the activation timer
in milliseconds for this basic rate interface
(timer 3). The deactivation function is specified
in order to permit this interface and the
network-side interface to be placed in a low power
consumption mode when no calls are in progress.
This timer starts upon the reception of an
ACTIVATE REQUEST by the layer 1 and it is normally
stopped when the ACTIVATED state is reached. The
equipment sends DEACTIVATE INDICATIONS when this
timer runs out
This is a decimal integer in the range 200 to
30000 by step of 200.
The default value is '10000'.
Parsed from file v42ami1e.mib.txt
Company: None
Module: PCE-MIB
The value of this object is the activation timer
in milliseconds for this basic rate interface
(timer 3). The deactivation function is specified
in order to permit this interface and the
network-side interface to be placed in a low power
consumption mode when no calls are in progress.
This timer starts upon the reception of an
ACTIVATE REQUEST by the layer 1 and it is normally
stopped when the ACTIVATED state is reached. The
equipment sends DEACTIVATE INDICATIONS when this
timer runs out
This is a decimal integer in the range 200 to
30000 by step of 200.
The default value is '10000'.
Parsed from file PCE-MIB.mib
Module: PCE-MIB
Vendor: Philips Communication d'Entreprise Claude Lubin
Module: PCE-MIB
[Automatically extracted from oidview.com]
fcfIsdnBriEnablingTimer OBJECT-TYPE SYNTAX INTEGER (200..30000) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the activation timer in milliseconds for this basic rate interface (timer 3). The deactivation function is specified in order to permit this interface and the network-side interface to be placed in a low power consumption mode when no calls are in progress. This timer starts upon the reception of an ACTIVATE REQUEST by the layer 1 and it is normally stopped when the ACTIVATED state is reached. The equipment sends DEACTIVATE INDICATIONS when this timer runs out This is a decimal integer in the range 200 to 30000 by step of 200. The default value is '10000'." ::= { fcfIsdnBasicRateInterfaceEntry 6 }
fcfIsdnBriEnablingTimer OBJECT-TYPE SYNTAX INTEGER (200..30000) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the activation timer in milliseconds for this basic rate interface (timer 3). The deactivation function is specified in order to permit this interface and the network-side interface to be placed in a low power consumption mode when no calls are in progress. This timer starts upon the reception of an ACTIVATE REQUEST by the layer 1 and it is normally stopped when the ACTIVATED state is reached. The equipment sends DEACTIVATE INDICATIONS when this timer runs out This is a decimal integer in the range 200 to 30000 by step of 200. The default value is '10000'." ::= { fcfIsdnBasicRateInterfaceEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.866.20.1.10.5.1.1.1 | fcfIsdnBasicRateInterfaceId | 0 | 0 | The value of this object identifies one and only one integrated services digital network (ISDN) basic rate interface (BRI). Each … |
| 1.3.6.1.4.1.866.20.1.10.5.1.1.2 | fcfIsdnBriSignalling | 0 | 0 | The value of this object indicates, for this basic rate interface, whether signalling is enabled or not. It must be set to 'on' t… |
| 1.3.6.1.4.1.866.20.1.10.5.1.1.3 | fcfIsdnBriCountry | 0 | 0 | The value of this object permits to take into account the national characteristics of some ISDN implementations : franceVn2 : Fran… |
| 1.3.6.1.4.1.866.20.1.10.5.1.1.4 | fcfIsdnBriInterfaceCheckPeriod | 0 | 0 | The value of this object indicates a period in milliseconds of detection of power source 1 or power source 2, whichever may be pr… |
| 1.3.6.1.4.1.866.20.1.10.5.1.1.5 | fcfIsdnBriFilterRepeatCount | 0 | 0 | The value of this object indicates the number of detections of power source 1 or power source 2, whichever may be provided for th… |
| 1.3.6.1.4.1.866.20.1.10.5.1.1.7 | fcfIsdnBriDisablingTimer | 0 | 0 | The value of this object is the deactivation delay in milliseconds for this basic rate interface. The deactivation function is sp… |