The value of this object indicates, when there is
several ISDN remote system for only one X25 in
ISDN D channel logical port, in which order the
equipment will try to call these several ISDN
remote system to establish an ISDN B Channel. When
a try to one ISDN remote system fails the
equipment continues, in the increasing order of
this parameter, with the following in the list
until the end of the list. The possible values are
: '0..15'. The default value is '0' (meaning
'first of the list').
Parsed from file v42ami1e.mib.txt
Company: None
Module: PCE-MIB
The value of this object indicates, when there is
several ISDN remote system for only one X25 in
ISDN D channel logical port, in which order the
equipment will try to call these several ISDN
remote system to establish an ISDN B Channel. When
a try to one ISDN remote system fails the
equipment continues, in the increasing order of
this parameter, with the following in the list
until the end of the list. The possible values are
: '0..15'. The default value is '0' (meaning
'first of the list').
Parsed from file PCE-MIB.mib
Module: PCE-MIB
Vendor: Philips Communication d'Entreprise Claude Lubin
Module: PCE-MIB
[Automatically extracted from oidview.com]
fclX25InDIsdnRemPriority OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object indicates, when there is several ISDN remote system for only one X25 in ISDN D channel logical port, in which order the equipment will try to call these several ISDN remote system to establish an ISDN B Channel. When a try to one ISDN remote system fails the equipment continues, in the increasing order of this parameter, with the following in the list until the end of the list. The possible values are : '0..15'. The default value is '0' (meaning 'first of the list')." ::= { fclX25InDIsdnRemotePeerEntry 8 }
fclX25InDIsdnRemPriority OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object indicates, when there is several ISDN remote system for only one X25 in ISDN D channel logical port, in which order the equipment will try to call these several ISDN remote system to establish an ISDN B Channel. When a try to one ISDN remote system fails the equipment continues, in the increasing order of this parameter, with the following in the list until the end of the list. The possible values are : '0..15'. The default value is '0' (meaning 'first of the list')." ::= { fclX25InDIsdnRemotePeerEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.866.20.1.20.21.4.1.1 | fclX25InDIsdnRemLogPortId | 0 | 0 | The value of this object identifies one and only one X25 in ISDN D channel access logical port. One X25 in ISDN D channel logical… |
| 1.3.6.1.4.1.866.20.1.20.21.4.1.2 | fclX25InDIsdnRemIsdnInterfaceId | 0 | 0 | The value of this object identifies one and only one ISDN remote system. This ISDN remote system must exist in fclIsdnRemotePeerT… |
| 1.3.6.1.4.1.866.20.1.20.21.4.1.3 | fclX25InDIsdnRemStatus | 0 | 0 | The value of this object indicates the state of the entry of this table. The default value is 'valid'. It must be set to 'invalid… |
| 1.3.6.1.4.1.866.20.1.20.21.4.1.4 | fclX25InDIsdnRemConnectionType | 0 | 0 | The value of this object indicates which is the system connected by the backup mechanism to this X25 in ISDN-D logical port. The … |
| 1.3.6.1.4.1.866.20.1.20.21.4.1.5 | fclX25InDIsdnRemSubscriberNumber | 0 | 0 | The value of this object is the SB number added to the DNICZO of the equipment to make the calling address in a call sent from th… |
| 1.3.6.1.4.1.866.20.1.20.21.4.1.6 | fclX25InDIsdnRemPdnLinkAddress | 0 | 0 | The value of this object is the X121 address of the equipment on the connected network (if fclX25InDIsdnRemConnectionType is set … |
| 1.3.6.1.4.1.866.20.1.20.21.4.1.7 | fclX25InDIsdnRemX25AccConfigId | 0 | 0 | The value of this object identifies the X25 access configuration used by this X25 in ISDN-D logical port. backup link. This X25 … |
| 1.3.6.1.4.1.866.20.1.20.21.4.1.9 | fclX25InDIsdnRemCallRetryCount | 0 | 0 | The value of this object indicates how many times the equipment will try to call this particular ISDN remote system to establish … |