The value of this object indicates the amount of
time available (T2), in milliseconds, before the
acknowledging frame must be initiated. This
parameter must be smaller than T1. The authorized
values are '100..12700'. The default value is
'400'.
Parsed from file v42ami1e.mib.txt
Company: None
Module: PCE-MIB
The value of this object indicates the amount of
time available (T2), in milliseconds, before the
acknowledging frame must be initiated. This
parameter must be smaller than T1. The authorized
values are '100..12700'. The default value is
'400'.
Parsed from file PCE-MIB.mib
Module: PCE-MIB
Vendor: Philips Communication d'Entreprise Claude Lubin
Module: PCE-MIB
[Automatically extracted from oidview.com]
fclX25CfnDlnT2AcknowledgeDelayTimer OBJECT-TYPE SYNTAX INTEGER (100..12700) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object indicates the amount of time available (T2), in milliseconds, before the acknowledging frame must be initiated. This parameter must be smaller than T1. The authorized values are '100..12700'. The default value is '400'." ::= { fclX25CfnDataLinkNetworkEntry 7 }
fclX25CfnDlnT2AcknowledgeDelayTimer OBJECT-TYPE SYNTAX INTEGER (100..12700) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object indicates the amount of time available (T2), in milliseconds, before the acknowledging frame must be initiated. This parameter must be smaller than T1. The authorized values are '100..12700'. The default value is '400'." ::= { fclX25CfnDataLinkNetworkEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.866.20.1.20.50.10.10.1.1 | fclX25CfnDlnConfigId | 0 | 0 | The value of this object identifies one and only one X25 inter-node configuration. The possible values are : '0..199. If it is un… |
| 1.3.6.1.4.1.866.20.1.20.50.10.10.1.2 | fclX25CfnDlnStationType | 0 | 0 | The value of this object defines the type of the interface at the data link layer (and not at the physical layer which is defined… |
| 1.3.6.1.4.1.866.20.1.20.50.10.10.1.5 | fclX25CfnDlnN2RetryCount | 0 | 0 | The value of this object indicates the maximum number (N2) of attempts made by the equipment to complete the successfull transmis… |
| 1.3.6.1.4.1.866.20.1.20.50.10.10.1.6 | fclX25CfnDlnT1AcknowledgeTimer | 0 | 0 | The value of this object indicates the period (T1), in milliseconds, at the end of which retransmission of a frame may be initiat… |
| 1.3.6.1.4.1.866.20.1.20.50.10.10.1.8 | fclX25CfnDlnKWindowSize | 0 | 0 | The value of this object indicates the maximum number (K) of sequentially numbered I frames that the equipment may have outstandi… |
| 1.3.6.1.4.1.866.20.1.20.50.10.10.1.9 | fclX25CfnDlnEachPacketAcknowledgement | 0 | 0 | The value of this object indicates whether each frame is acknowledged or not. The default value is 'off'. |
| 1.3.6.1.4.1.866.20.1.20.50.10.10.1.10 | fclX25CfnDlnLowestIncomingChannel | 0 | 0 | The value of this object is the Lowest Incoming one-way logical Channel (LIC).The authorized values are '0..4095'. The default va… |
| 1.3.6.1.4.1.866.20.1.20.50.10.10.1.11 | fclX25CfnDlnIncomingChannelCount | 0 | 0 | The value of this object is the Number of Incoming one-way logical Channels (NIC). So the Highest Incoming one-way logical Channe… |
| 1.3.6.1.4.1.866.20.1.20.50.10.10.1.15 | fclX25CfnDlnLowestTwoWayChannel | 0 | 0 | The value of this object is the Lowest Two-way logical Channel (LTC). The authorized values are '0..4095'. The default value is '… |
| 1.3.6.1.4.1.866.20.1.20.50.10.10.1.16 | fclX25CfnDlnTwoWayChannelCount | 0 | 0 | The value of this object is the Number of Two-way logical Channels. So the Highest Two-way logical Channel (HTC) is : HTC = LTC +… |
| 1.3.6.1.4.1.866.20.1.20.50.10.10.1.17 | fclX25CfnDlnLowestOutgoingChannel | 0 | 0 | The value of this object is the Lowest Outgoing one-way logical Channel (LOC). The authorized values are '0..4095'. The default v… |
| 1.3.6.1.4.1.866.20.1.20.50.10.10.1.18 | fclX25CfnDlnOutgoingChannelCount | 0 | 0 | The value of this object is the Number of Outgoing one-way logical Channels (NOC). So the Highest Outgoing one-way logical Channe… |
| 1.3.6.1.4.1.866.20.1.20.50.10.10.1.19 | fclX25CfnDlnOutgoingChannelNumbering | 0 | 0 | The value of this object indicates whether the equipment searches for a logical channel from the lowest one to the highest one (i… |
| 1.3.6.1.4.1.866.20.1.20.50.10.10.1.30 | fclX25CfnDlnDBitModification | 0 | 0 | The value of this object indicates how the equipment manages the D bit (Delivery Confirmation Bit). When it receives a call from … |