The value of this object is the multi-packets
timer in milliseconds. When the compression is
active, the multi-packets function is specified in
order to reduce the number of single packets
(i.e., without 'More Data mark' = bit M set to 0)
transmitted to the remote peer by grouping several
packets in an only one compressed output packet.
The value 0 disables this function (i.e., each
single packet is individually compressed and
sent). So to enable this function this timer must
be different from 0 on both the local equipment
and the remote peer (even when the compression
direction is set to 'subscriberToNetwork' or
'subscriberToNetwork').
This timer starts when the equipment begins to
fill a new compressed output packet and it is
normally stopped when this packet is sent. When
this timer runs out the equipment sends this
compressed packet even if it is not full.
This is a decimal integer in the range 0 to 1500
by step of 100.
The default value is '0'.
Parsed from file v42ami1e.mib.txt
Company: None
Module: PCE-MIB
The value of this object is the multi-packets
timer in milliseconds. When the compression is
active, the multi-packets function is specified in
order to reduce the number of single packets
(i.e., without 'More Data mark' = bit M set to 0)
transmitted to the remote peer by grouping several
packets in an only one compressed output packet.
The value 0 disables this function (i.e., each
single packet is individually compressed and
sent). So to enable this function this timer must
be different from 0 on both the local equipment
and the remote peer (even when the compression
direction is set to 'subscriberToNetwork' or
'subscriberToNetwork').
This timer starts when the equipment begins to
fill a new compressed output packet and it is
normally stopped when this packet is sent. When
this timer runs out the equipment sends this
compressed packet even if it is not full.
This is a decimal integer in the range 0 to 1500
by step of 100.
The default value is '0'.
Parsed from file PCE-MIB.mib
Module: PCE-MIB
Vendor: Philips Communication d'Entreprise Claude Lubin
Module: PCE-MIB
[Automatically extracted from oidview.com]
fcvRvpCompressMultiPacketsTimer OBJECT-TYPE SYNTAX INTEGER (0..1500) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the multi-packets timer in milliseconds. When the compression is active, the multi-packets function is specified in order to reduce the number of single packets (i.e., without 'More Data mark' = bit M set to 0) transmitted to the remote peer by grouping several packets in an only one compressed output packet. The value 0 disables this function (i.e., each single packet is individually compressed and sent). So to enable this function this timer must be different from 0 on both the local equipment and the remote peer (even when the compression direction is set to 'subscriberToNetwork' or 'subscriberToNetwork'). This timer starts when the equipment begins to fill a new compressed output packet and it is normally stopped when this packet is sent. When this timer runs out the equipment sends this compressed packet even if it is not full. This is a decimal integer in the range 0 to 1500 by step of 100. The default value is '0'." ::= { fcvRemoteVirtualPorts 4 }
fcvRvpCompressMultiPacketsTimer OBJECT-TYPE SYNTAX INTEGER (0..1500) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is the multi-packets timer in milliseconds. When the compression is active, the multi-packets function is specified in order to reduce the number of single packets (i.e., without 'More Data mark' = bit M set to 0) transmitted to the remote peer by grouping several packets in an only one compressed output packet. The value 0 disables this function (i.e., each single packet is individually compressed and sent). So to enable this function this timer must be different from 0 on both the local equipment and the remote peer (even when the compression direction is set to 'subscriberToNetwork' or 'subscriberToNetwork'). This timer starts when the equipment begins to fill a new compressed output packet and it is normally stopped when this packet is sent. When this timer runs out the equipment sends this compressed packet even if it is not full. This is a decimal integer in the range 0 to 1500 by step of 100. The default value is '0'." ::= { fcvRemoteVirtualPorts 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.866.20.1.30.20.4.0 | fcvRvpCompressMultiPacketsTimer | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.866.20.1.30.20.1 | fcvRvpCompression | 1 | 1 | For all the connections described in fcvRvpConnectionTable, the value of this object indicates the compression enabling for each d… |
| 1.3.6.1.4.1.866.20.1.30.20.2 | fcvRvpCompressNegotiation | 1 | 1 | The value of this object indicates, when the compression is active, whether the compression facility is negociated or not and, if… |
| 1.3.6.1.4.1.866.20.1.30.20.3 | fcvRvpCompressScrambling | 1 | 1 | The value of this object indicates, when the compression is active, whether the scrambling is enabled or not. @ The default value … |
| 1.3.6.1.4.1.866.20.1.30.20.5 | fcvRvpReliableVirtualCircuit | 1 | 1 | For all the connections described in fcvRvpConnectionTable, the value of this object indicates whether the Reliable Virtual Circu… |
| 1.3.6.1.4.1.866.20.1.30.20.6 | fcvRvpBe | 1 | 1 | Entrant BE |
| 1.3.6.1.4.1.866.20.1.30.20.7 | fcvRvpConversionAimedPoint | 1 | 1 | Conversion adresse : point vise |
| 1.3.6.1.4.1.866.20.1.30.20.8 | fcvRvpConversionIncomingCall | 1 | 1 | Conversion d'adresse sur appel entrant |
| 1.3.6.1.4.1.866.20.1.30.20.9 | fcvRvpConversionOutgoingCall | 1 | 1 | Conversion adresse sur appel sortant |
| 1.3.6.1.4.1.866.20.1.30.20.10 | fcvRvpConversionAddressCheck | 1 | 1 | Conversion adresse : controle de la presence dans les tables de conversion |
| 1.3.6.1.4.1.866.20.1.30.20.11 | fcvRvpConvMultiCalledAddrInCall | 1 | 1 | Numero d'identification pour conversion d'adresse d'appele multi-criteres en entree |
| 1.3.6.1.4.1.866.20.1.30.20.12 | fcvRvpConvMultiCallingAddrInCall | 1 | 1 | Numero d'identification pour conversion d'adresse d'appelant multi-criteres en entree |
| 1.3.6.1.4.1.866.20.1.30.20.13 | fcvRvpConvMultiCalledAddrOutCall | 1 | 1 | Numero d'identification pour conversion d'adresse d'appele multi-criteres en sortie |
| 1.3.6.1.4.1.866.20.1.30.20.14 | fcvRvpConvMultiCallingAddrOutCall | 1 | 1 | Numero d'identification pour conversion d'adresse d'appelant multi-criteres en sortie |
| 1.3.6.1.4.1.866.20.1.30.20.15 | fcvRvpCallAcceptwithReverseCharging | 1 | 1 | Acceptation appel avec TAD |
| 1.3.6.1.4.1.866.20.1.30.20.20 | fcvRvpCos | 1 | 1 | For all the connections described in fcvRvpConnectionTable, the value of this object indicates the Class Of Service (COS) desired… |
| 1.3.6.1.4.1.866.20.1.30.20.21 | fcvRvpCir | 1 | 1 | For all the connections described in fcvRvpConnectionTable, the value of this object indicates the Committed Infomation Rate (CIR… |
| 1.3.6.1.4.1.866.20.1.30.20.22 | fcvRvpMinCir | 1 | 1 | For all the connections described in fcvRvpConnectionTable, the value of this object indicates the minimum Committed Infomation R… |
| 1.3.6.1.4.1.866.20.1.30.20.23 | fcvRvpConnectionTable | 1 | 16 | This table defines the connections to each remote bridge or router on WAN virtual networks. Each connection is attached to one re… |