Vendor: Philips Communication d'Entreprise Claude Lubin
Module: PCE-MIB
[Automatically extracted from oidview.com]
fcsnaLvpParameters OBJECT IDENTIFIER ::= { fcsnaLocalVirtualPort 10 }
fcsnaLvpParameters OBJECT IDENTIFIER ::= { fcsnaLocalVirtualPort 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.866.20.1.32.1.10.1 | fcsnaLvpParamLinkType | 1 | 1 | The type of frontal must be connected to a primary link-station or negociable link station that will become the primary. The type… |
| 1.3.6.1.4.1.866.20.1.32.1.10.2 | fcsnaLvpParamFrameFormat | 1 | 1 | The unit supports IEEE 802.3 and V2 DIX Ethernet frame format. |
| 1.3.6.1.4.1.866.20.1.32.1.10.3 | fcsnaLvpParamLocalTest | 1 | 1 | This feature is used in 'frontal' mode. If this feature is set to on, and when the internal connection is established, it will se… |
| 1.3.6.1.4.1.866.20.1.32.1.10.4 | fcsnaLvpParamCallDirection | 1 | 1 | Frontal mode is called. Remote mode is calling. |
| 1.3.6.1.4.1.866.20.1.32.1.10.5 | fcsnaLvpMacAddressTrans | 1 | 1 | MAC address translation. |
| 1.3.6.1.4.1.866.20.1.32.1.10.10 | fcsnaLvpParamT1 | 1 | 1 | T1 Reply timer. A link-station uses T1 to detect a failure to receive a required acknowlegment or response. T1 runs when there ar… |
| 1.3.6.1.4.1.866.20.1.32.1.10.11 | fcsnaLvpParamN2 | 1 | 1 | The maximum number of transmissions. If the reply timer expires for whatever reason, an S-frame with poll bit set is sent to soll… |
| 1.3.6.1.4.1.866.20.1.32.1.10.12 | fcsnaLvpParamT2 | 1 | 1 | Receiver acknowledge timer. The end station uses this timer to delay the seding of an acknowlegment for a received I-frame LPDU. … |
| 1.3.6.1.4.1.866.20.1.32.1.10.13 | fcsnaLvpParamN3 | 1 | 1 | Number of I-frame LPDU's received before sending an acknowledgment. |
| 1.3.6.1.4.1.866.20.1.32.1.10.14 | fcsnaLvpParamNW | 1 | 1 | Number of acknowledgments needed to increment Ww. |
| 1.3.6.1.4.1.866.20.1.32.1.10.15 | fcsnaLvpParamTW | 1 | 1 | LLC transmit window size. This is maximum number of sequentially numbered Iframe that the link-station may have outstanding at an… |
| 1.3.6.1.4.1.866.20.1.32.1.10.16 | fcsnaLvpParamRW | 1 | 1 | LLC receive window size. This is the maximum number of unacknowlegment sequentially numbered I-frame the link-station can receive… |
| 1.3.6.1.4.1.866.20.1.32.1.10.20 | fcsnaLvpParamMinRecallTimer | 1 | 1 | Slow call timer. |
| 1.3.6.1.4.1.866.20.1.32.1.10.21 | fcsnaLvpParamSubscriberNumber | 1 | 1 | The value of this object is the SB number added to the DNICZO of the equipment to make the calling address in a call sent from th… |
| 1.3.6.1.4.1.866.20.1.32.1.10.22 | fcsnaLvpParamReliableVc | 1 | 1 | The value of this object is used to enable the Reliable Virtual Circuit service. The authorized values are : off : no RVC, the VCs… |
| 1.3.6.1.4.1.866.20.1.32.1.10.30 | fcsnaLvpParamCompression | 1 | 1 | The value of this object indicates the compression enabling for each direction. The authorized values are : off : no compression, n… |
| 1.3.6.1.4.1.866.20.1.32.1.10.31 | fcsnaLvpParamCompressNegotiation | 1 | 1 | The value of this object indicates whether the compression facility is negociated or not and, if negociated, the optional/obligat… |
| 1.3.6.1.4.1.866.20.1.32.1.10.32 | fcsnaLvpParamCompressScrambling | 1 | 1 | The value of this object indicates, when the compression is active, whether the scrambling is enabled or not. The default value i… |
| 1.3.6.1.4.1.866.20.1.32.1.10.33 | fcsnaLvpParamCompressMultiPacketsTimer | 1 | 1 | The value of this object defines the maximum waiting time, in milliseconds by steps of 100 milliseconds , which, if there is not … |
| 1.3.6.1.4.1.866.20.1.32.1.10.40 | fcsnaLvpParamCos | 1 | 1 | Class Of Service VBR or UBR. |
| 1.3.6.1.4.1.866.20.1.32.1.10.41 | fcsnaLvpParamCir | 1 | 1 | Committed information Rate is the maximum number of bits per seconds which an end station can transmit into the network . This is… |
| 1.3.6.1.4.1.866.20.1.32.1.10.42 | fcsnaLvpParamCirMin | 1 | 1 | If the end station is informed about the congestion of the network, this is the minimum CIR that the end station can transmit int… |
| 1.3.6.1.4.1.866.20.1.32.1.10.43 | fcsnaLvpParamBc | 1 | 1 | The Committed Burst Size is a measure for the volume of data for which the network will garantee message delivery under normal co… |
| 1.3.6.1.4.1.866.20.1.32.1.10.44 | fcsnaLvpParamBe | 1 | 1 | The Excess Burst Size is the maximum amount of uncommitted data in access of Bc that the network will attemp to deliver during a … |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.866.20.1.32.1.1 | fcsnaLvpLocalLanPuTable | 1 | 4 | None |
| 1.3.6.1.4.1.866.20.1.32.1.20 | fcsnaLvpTrParameters | 26 | 52 | None |