The value of this object indicates whether the
Source Routing information is inserted in the
forwarded IP datagrams or not.
The default value is 'off'.
Parsed from file v42ami1e.mib.txt
Company: None
Module: PCE-MIB
The value of this object indicates whether the
Source Routing information is inserted in the
forwarded IP datagrams or not.
The default value is 'off'.
Parsed from file PCE-MIB.mib
Module: PCE-MIB
Vendor: Philips Communication d'Entreprise Claude Lubin
Module: PCE-MIB
[Automatically extracted from oidview.com]
fciSourceRouting OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object indicates whether the Source Routing information is inserted in the forwarded IP datagrams or not. The default value is 'off'." ::= { fcIpRouter 4 }
fciSourceRouting OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object indicates whether the Source Routing information is inserted in the forwarded IP datagrams or not. The default value is 'off'." ::= { fcIpRouter 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.866.20.1.36.4.0 | fciSourceRouting | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.866.20.1.36.1 | fciIpRouting | 1 | 1 | The value of this object indicates whether the equipment is acting as an IP gateway in respect to the forwarding of IP datagrams … |
1.3.6.1.4.1.866.20.1.36.2 | fciFastIpRouting | 1 | 1 | The value of this object indicates whether the optimized forwarding of IP datagrams is enabled or not. This optimization consist … |
1.3.6.1.4.1.866.20.1.36.3 | fciIcmpRedirection | 1 | 1 | The value of this object indicates whether the ICMP (Internet Control Message Protocol) Redirect messages are sent or not. The def… |
1.3.6.1.4.1.866.20.1.36.10 | fciVirtualPortTable | 1 | 8 | This table defines the virtual ports used by the IP router. Set any writable object(s) of this table to valid value(s) with a new … |
1.3.6.1.4.1.866.20.1.36.11 | fciLocalVirtualPortTable | 1 | 4 | This table defines the local virtual ports used by the IP router. Set any writable object(s) of this table to valid value(s) with … |
1.3.6.1.4.1.866.20.1.36.12 | fciLocalClusterTable | 1 | 6 | None |
1.3.6.1.4.1.866.20.1.36.15 | fciRemoteNetToMediaTable | 1 | 4 | This table contains the IP address translations used for mapping from IP address to X121 address for each IP router reachable thr… |
1.3.6.1.4.1.866.20.1.36.16 | fciNetToMediaTable | 1 | 4 | ARP (Address Resolution Protocol) is in charge to dynamically manage the IP address translations used for mapping from IP address… |
1.3.6.1.4.1.866.20.1.36.20 | fciIpRouteTable | 1 | 6 | RIP (Routing Information Protocol) or EGP (External Gateway Protocol) are in charge to dynamically manage the routes used by the … |
1.3.6.1.4.1.866.20.1.36.30 | fciFlowManagement | 3 | 25 | None |
1.3.6.1.4.1.866.20.1.36.40 | fciRip | 11 | 39 | None |
1.3.6.1.4.1.866.20.1.36.41 | fciOspf | 7 | 74 | None |
1.3.6.1.4.1.866.20.1.36.45 | fciEgp | 7 | 19 | None |
1.3.6.1.4.1.866.20.1.36.50 | fciSnmp | 9 | 22 | None |
1.3.6.1.4.1.866.20.1.36.60 | fciBootP | 1 | 17 | None |
1.3.6.1.4.1.866.20.1.36.70 | fciTelnet | 3 | 32 | None |