When the value is clean(1)Device and Management Module
cache are synchronized, no automatic corrections to
configuration will occur. When the value is dirty(2)
Device and Management Module cache are not synchronized.
The configuration currently displayed by the application
has not been validated by the device. The device may
need to correct the configuration, in which case the
displayed configuration will change.
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
cettf100CacheClean OBJECT-TYPE SYNTAX INTEGER { clean(1), dirty(2) } ACCESS read-only STATUS mandatory DESCRIPTION "When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occur. When the value is dirty(2) Device and Management Module cache are not synchronized. The configuration currently displayed by the application has not been validated by the device. The device may need to correct the configuration, in which case the displayed configuration will change." ::= { cettf100Entry 18 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.4.1.2.2.3.1.1 | cettf100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.3.1.2 | cettf100SlotIndex | 0 | 0 | The slot in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.3.1.3 | cettf100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
| 1.3.6.1.4.1.868.2.4.1.2.2.3.1.4 | cettf100MRevision | 0 | 0 | The marketing revision of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.3.1.5 | cettf100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
| 1.3.6.1.4.1.868.2.4.1.2.2.3.1.6 | cettf100SerialNumber | 0 | 0 | The serial number of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.3.1.7 | cettf100ConnA | 0 | 0 | The style of Fiber connector built into this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.3.1.8 | cettf100ConnB | 0 | 0 | The style of Copper connector built into this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.3.1.9 | cettf100TPLink | 0 | 0 | Status of Copper Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.3.1.10 | cettf100FiberLink | 0 | 0 | Status of Fiber Link for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.3.1.11 | cettf100Fault | 0 | 0 | Value is yes(1) when either TPLink or FiberLink has value linkDown(2) |
| 1.3.6.1.4.1.868.2.4.1.2.2.3.1.12 | cettf100TPActivity | 0 | 0 | Network traffic indicator for Copper side of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.3.1.13 | cettf100FiberActivity | 0 | 0 | Network traffic indicator for Fiber side of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.3.1.14 | cettf100AutoCross | 0 | 0 | Enable/Disable for automatic copper TX/RX pair correction |
| 1.3.6.1.4.1.868.2.4.1.2.2.3.1.15 | cettf100LinkPassThrough | 0 | 0 | Enable/Disable for Link Pass Through, a feature that causes loss of link on one side of a media converter to be passed through to… |
| 1.3.6.1.4.1.868.2.4.1.2.2.3.1.16 | cettf100ConfigMode | 0 | 0 | This device has a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP manageme… |
| 1.3.6.1.4.1.868.2.4.1.2.2.3.1.17 | cettf100Enabled | 0 | 0 | When this configuration item is set to no(2), the device passes no network traffic. |