Indicates mandatory state of the VTU-O line. This is a
bit-map of possible conditions. The various bit
positions are:
0 noDefect There no defects on the line
1 lossOfFraming VTU-O failure due to not
receiving valid frame.
2 lossOfSignal VTU-O failure due to not
receiving signal.
3 lossOfPower VTU-O failure due to loss of
power.
Note: the Agent may still
function.
4 lossOfSignalQuality Loss of Signal Quality is
declared when the Noise Margin
falls below the Minimum Noise
Margin, or the bit-error-rate
exceeds 10^-7.
5 lossOfLink VTU-O failure due to inability
to link with VTU-R.
6 dataInitFailure VTU-O failure during
initialization due to bit
errors corrupting startup
exchange data.
7 configInitFailure VTU-O failure during
initialization due to peer
VTU not able to support
requested configuration
8 protocolInitFailure VTU-O failure during
initialization due to
incompatible protocol used by
the peer VTU.
9 noPeerVtuPresent VTU-O failure during
initialization due to no
activation sequence detected
from peer VTU.
This is intended to supplement ifOperStatus.
Parsed from file ZYXEL-VDSLLINE-MIB.mib
Module: ZYXEL-VDSLLINE-MIB
Vendor: ZyXEL Communications Corp.
Module: ZYXEL-VDSLLINE-MIB
[Automatically extracted from oidview.com]
accessSwitchVdslVtuoCurrStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates mandatory state of the VTU-O line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There no defects on the line 1 lossOfFraming VTU-O failure due to not receiving valid frame. 2 lossOfSignal VTU-O failure due to not receiving signal. 3 lossOfPower VTU-O failure due to loss of power. Note: the Agent may still function. 4 lossOfSignalQuality Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7. 5 lossOfLink VTU-O failure due to inability to link with VTU-R. 6 dataInitFailure VTU-O failure during initialization due to bit errors corrupting startup exchange data. 7 configInitFailure VTU-O failure during initialization due to peer VTU not able to support requested configuration 8 protocolInitFailure VTU-O failure during initialization due to incompatible protocol used by the peer VTU. 9 noPeerVtuPresent VTU-O failure during initialization due to no activation sequence detected from peer VTU. This is intended to supplement ifOperStatus." ::= { accessSwitchVdslVtuoPhysEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.1 | accessSwitchVdslVtuoCurrSnrMgn | 0 | 0 | Noise Margin as seen by this VTU with respect to its received signal in 0.01dB. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.2 | accessSwitchVdslVtuoCurrMse | 0 | 0 | Minimum Square Error as seen by this VTU with respect to its received signal in 0.01dB. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.3 | accessSwitchVdslVtuoCurrPsd | 0 | 0 | Power Spectral Density as seen by this VTU with respect to its received signal in 0.01dBm/Hz. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.4 | accessSwitchVdslVtuoCurrRsErr | 0 | 0 | Reed-Solomon error counted by this VTU with respect to its received signal. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.5 | accessSwitchVdslVtuoCurrAtn | 0 | 0 | Measured difference in the total power transmitted by the peer VTU and the total power received by this VTU. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.6 | accessSwitchVdslVtuoCurrOutputPwr | 0 | 0 | Measured total output power in 0.01dBm transmitted by this VTU. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.7 | accessSwitchVdslVtuoCurrRate | 0 | 0 | Actual transmission rate in bits-per-second on this line. |
| 1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.8 | accessSwitchVdslVtuoCurrAttainableRate | 0 | 0 | Indicates the maximum mandatoryly attainable data rate in bits-per-second by the VTU. This value will be equal or greater than t… |