Indicates mandatory state of the VTU-R line. This is a
bit-map of possible conditions. The various bit
positions are:
0 noDefect There no defects on the line
1 lossOfFraming VTU-R failure due to not
receiving valid frame.
2 lossOfSignal VTU-R failure due to not
receiving signal.
3 lossOfPower VTU-R failure due to loss of
power.
Note: the Agent may still
function.
4 lossOfSignalQuality Loss of Signal Quality is
declared when the Noise Margin
falls below the Minimum Noise
Margin, or the bit-error-rate
exceeds 10^-7.
This is intended to supplement ifOperStatus.
Parsed from file ZYXEL-VDSLLINE-MIB.mib
Module: ZYXEL-VDSLLINE-MIB
Vendor: ZyXEL Communications Corp.
Module: ZYXEL-VDSLLINE-MIB
[Automatically extracted from oidview.com]
accessSwitchVdslVturCurrStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates mandatory state of the VTU-R line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There no defects on the line 1 lossOfFraming VTU-R failure due to not receiving valid frame. 2 lossOfSignal VTU-R failure due to not receiving signal. 3 lossOfPower VTU-R failure due to loss of power. Note: the Agent may still function. 4 lossOfSignalQuality Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7. This is intended to supplement ifOperStatus." ::= { accessSwitchVdslVturPhysEntry 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.1 | accessSwitchVdslVturCurrSnrMgn | 0 | 0 | Noise Margin as seen by this VTU with respect to its received signal in 0.01dB. |
1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.2 | accessSwitchVdslVturCurrMse | 0 | 0 | Minimum Square Error as seen by this VTU with respect to its received signal in 0.01dB. |
1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.3 | accessSwitchVdslVturCurrPsd | 0 | 0 | Power Spectral Density as seen by this VTU with respect to its received signal in 0.01dBm/Hz. |
1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.4 | accessSwitchVdslVturCurrRsErr | 0 | 0 | Reed-Solomon error counted by this VTU with respect to its received signal. |
1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.5 | accessSwitchVdslVturCurrAtn | 0 | 0 | Measured difference in the total power transmitted by the peer VTU and the total power received by this VTU. |
1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.6 | accessSwitchVdslVturCurrOutputPwr | 0 | 0 | Measured total output power in 0.01dBm transmitted by this VTU. |
1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.7 | accessSwitchVdslVturCurrRate | 0 | 0 | Actual transmission rate in bits-per-second on this line. |
1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.8 | accessSwitchVdslVturCurrAttainableRate | 0 | 0 | Indicates the maximum mandatoryly attainable data rate in bits-per-second by the VTU. This value will be equal or greater than t… |