This object defines the groups of user PRI mapped into
this VC. Each bit set indicates that this user priority
is assigned to this VC.
The value 'untagged' is used to indicate that untagged
frames are also associated to this VC.
This object allow the use of different PSN COS based on
user marking of PRI bits in MPLS PSN with L-LSP or
E-LSP without multiple COS support. In all other cases,
the default value MUST be used.
It is REQUIRED that there is no overlap on this object
between rows serving the same service (port+ PW VLAN).
In case of missing BIT configuration between rows to
the same service, incoming packets with PRI marking not
configured should be handled by the VC with the lowest
COS.
Parsed from file CISCO-IETF-PW-ENET-MIB.mib
Module: CISCO-IETF-PW-ENET-MIB
This object defines the groups of user PRI mapped into
this VC. Each bit set indicates that this user priority
is assigned to this VC.
The value 'untagged' is used to indicate that untagged
frames are also associated to this VC.
This object allow the use of different PSN COS based on
user marking of PRI bits in MPLS PSN with L-LSP or
E-LSP without multiple COS support. In all other cases,
the default value MUST be used.
It is REQUIRED that there is no overlap on this object
between rows serving the same service (port+ PW VLAN).
In case of missing BIT configuration between rows to
the same service, incoming packets with PRI marking not
configured should be handled by the VC with the lowest
COS.
This object defines the groups of user PRI mapped into
this VC. Each bit set indicates that this user priority
is assigned to this VC.
The value 'untagged' is used to indicate that untagged
frames are also associated to this VC.
This object allow the use of different PSN COS based on
user marking of PRI bits in MPLS PSN with L-LSP or
E-LSP without multiple COS support. In all other cases,
the default value MUST be used.
It is REQUIRED that there is no overlap on this object
between rows serving the same service (port+ PW VLAN).
In case of missing BIT configuration between rows to
the same service, incoming packets with PRI marking not
configured should be handled by the VC with the lowest
COS.
Parsed from file CISCO-IETF-PW-ENET-MIB.my.txt
Company: None
Module: CISCO-IETF-PW-ENET-MIB
This object defines the groups of user PRI mapped into
this VC. Each bit set indicates that this user priority
is assigned to this VC.
The value 'untagged' is used to indicate that untagged
frames are also associated to this VC.
This object allow the use of different PSN COS based on
user marking of PRI bits in MPLS PSN with L-LSP or
E-LSP without multiple COS support. In all other cases,
the default value MUST be used.
It is REQUIRED that there is no overlap on this object
between rows serving the same service (port+ PW VLAN).
In case of missing BIT configuration between rows to
the same service, incoming packets with PRI marking not
configured should be handled by the VC with the lowest
COS.
cpwVcEnetMplsPriMapping OBJECT-TYPE SYNTAX BITS { pri000 (0), pri001 (1), pri010 (2), pri011 (3), pri100 (4), pri101 (5), pri110 (6), pri111 (7), untagged (8) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the groups of user PRI mapped into this VC. Each bit set indicates that this user priority is assigned to this VC. The value 'untagged' is used to indicate that untagged frames are also associated to this VC. This object allow the use of different PSN COS based on user marking of PRI bits in MPLS PSN with L-LSP or E-LSP without multiple COS support. In all other cases, the default value MUST be used. It is REQUIRED that there is no overlap on this object between rows serving the same service (port+ PW VLAN). In case of missing BIT configuration between rows to the same service, incoming packets with PRI marking not configured should be handled by the VC with the lowest COS. " REFERENCE "See appendix A of
for mapping rules of the PRI bits to PSN COS." ::= { cpwVcEnetMplsPriMappingTableEntry 1 }
cpwVcEnetMplsPriMapping OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the groups of user PRI mapped into this VC. Each bit set indicates that this user priority is assigned to this VC. The value 'untagged' is used to indicate that untagged frames are also associated to this VC. This object allow the use of different PSN COS based on user marking of PRI bits in MPLS PSN with L-LSP or E-LSP without multiple COS support. In all other cases, the default value MUST be used. It is REQUIRED that there is no overlap on this object between rows serving the same service (port+ PW VLAN). In case of missing BIT configuration between rows to the same service, incoming packets with PRI marking not configured should be handled by the VC with the lowest COS. " REFERENCE "See appendix A of
for mapping rules of the PRI bits to PSN COS." ::= { cpwVcEnetMplsPriMappingTableEntry 1 }
Vendor: Cisco
Module: CISCO-IETF-PW-ENET-MIB
[Automatically extracted from oidview.com]
cpwVcEnetMplsPriMapping OBJECT-TYPE SYNTAX BITS { pri000 (0), pri001 (1), pri010 (2), pri011 (3), pri100 (4), pri101 (5), pri110 (6), pri111 (7), untagged (8) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the groups of user PRI mapped into this VC. Each bit set indicates that this user priority is assigned to this VC. The value 'untagged' is used to indicate that untagged frames are also associated to this VC. This object allow the use of different PSN COS based on user marking of PRI bits in MPLS PSN with L-LSP or E-LSP without multiple COS support. In all other cases, the default value MUST be used. It is REQUIRED that there is no overlap on this object between rows serving the same service (port+ PW VLAN). In case of missing BIT configuration between rows to the same service, incoming packets with PRI marking not configured should be handled by the VC with the lowest COS. " REFERENCE "See appendix A of
for mapping rules of the PRI bits to PSN COS." ::= { cpwVcEnetMplsPriMappingTableEntry 1 }
cpwVcEnetMplsPriMapping OBJECT-TYPE SYNTAX BITS { pri000 (0), pri001 (1), pri010 (2), pri011 (3), pri100 (4), pri101 (5), pri110 (6), pri111 (7), untagged (8) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the groups of user PRI mapped into this VC. Each bit set indicates that this user priority is assigned to this VC. The value 'untagged' is used to indicate that untagged frames are also associated to this VC. This object allow the use of different PSN COS based on user marking of PRI bits in MPLS PSN with L-LSP or E-LSP without multiple COS support. In all other cases, the default value MUST be used. It is REQUIRED that there is no overlap on this object between rows serving the same service (port+ PW VLAN). In case of missing BIT configuration between rows to the same service, incoming packets with PRI marking not configured should be handled by the VC with the lowest COS. " REFERENCE "See appendix A of
for mapping rules of the PRI bits to PSN COS." ::= { cpwVcEnetMplsPriMappingTableEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.108.1.2.1.2 | cpwVcEnetMplsPriMappingRowStatus | 0 | 0 | Enable creating, deleting and modifying this row. |
| 1.3.6.1.4.1.9.10.108.1.2.1.3 | cpwVcEnetMplsPriMappingStorageType | 0 | 0 | Indicates the storage type of this row. |