Reference record for OID 1.3.6.1.4.1.9.10.13.1.5.1.1



parent
1.3.6.1.4.1.9.10.13.1.5.1 (ciscoAtmSnoopVcTable)
node code
1
node name
ciscoAtmSnoopVcEntry
dot oid
1.3.6.1.4.1.9.10.13.1.5.1.1
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoExperiment(10) ciscoAtmConnMIB(13) ciscoAtmConnMIBObjects(1) ciscoAtmSnoopVc(5) ciscoAtmSnoopVcTable(1) ciscoAtmSnoopVcEntry(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoExperiment(10) ciscoAtmConnMIB(13) ciscoAtmConnMIBObjects(1) ciscoAtmSnoopVc(5) ciscoAtmSnoopVcTable(1) ciscoAtmSnoopVcEntry(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoExperiment(10) ciscoAtmConnMIB(13) ciscoAtmConnMIBObjects(1) ciscoAtmSnoopVc(5) ciscoAtmSnoopVcTable(1) ciscoAtmSnoopVcEntry(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoExperiment(10) ciscoAtmConnMIB(13) ciscoAtmConnMIBObjects(1) ciscoAtmSnoopVc(5) ciscoAtmSnoopVcTable(1) ciscoAtmSnoopVcEntry(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoExperiment(10) ciscoAtmConnMIB(13) ciscoAtmConnMIBObjects(1) ciscoAtmSnoopVc(5) ciscoAtmSnoopVcTable(1) ciscoAtmSnoopVcEntry(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoExperiment(10) ciscoAtmConnMIB(13) ciscoAtmConnMIBObjects(1) ciscoAtmSnoopVc(5) ciscoAtmSnoopVcTable(1) ciscoAtmSnoopVcEntry(1)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoExperiment/ciscoAtmConnMIB/ciscoAtmConnMIBObjects/ciscoAtmSnoopVc/ciscoAtmSnoopVcTable/ciscoAtmSnoopVcEntry
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoExperiment/ciscoAtmConnMIB/ciscoAtmConnMIBObjects/ciscoAtmSnoopVc/ciscoAtmSnoopVcTable/ciscoAtmSnoopVcEntry
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoExperiment/ciscoAtmConnMIB/ciscoAtmConnMIBObjects/ciscoAtmSnoopVc/ciscoAtmSnoopVcTable/ciscoAtmSnoopVcEntry
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoExperiment/ciscoAtmConnMIB/ciscoAtmConnMIBObjects/ciscoAtmSnoopVc/ciscoAtmSnoopVcTable/ciscoAtmSnoopVcEntry
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoExperiment/ciscoAtmConnMIB/ciscoAtmConnMIBObjects/ciscoAtmSnoopVc/ciscoAtmSnoopVcTable/ciscoAtmSnoopVcEntry
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoExperiment/ciscoAtmConnMIB/ciscoAtmConnMIBObjects/ciscoAtmSnoopVc/ciscoAtmSnoopVcTable/ciscoAtmSnoopVcEntry
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/10/13/1/5/1/1

    Description by circitor

    An entry in the Snoop VC table. This entry models a VC snooping
    connection. The ifIndex indicates the snooping interface, the
    atmVclVpi and atmVclVci specifies the VPI and VCI value of the
    snooping connection. To create or destroy a snooping connection
    at an ATM interface, the following procedures are used:

    Configure VC Snooping

    A snooping connection is configured in one step by a set-request
    with all necessary snoop parameter values and set-request to the
    object ciscoAtmSnoopVcRowStatus to createAndGo(4). This may fail
    for the following reasons:
    - The selected snooping VPI/VCI values are unavailable,
    - The selected snooping VPI/VCI values are in use.
    - The selected snooping interface is CPU interface.
    - The selected snooped connection doesn't exist.
    - There is no traffic in the selected snoop direction.
    - Resource failure during configuration of snooping connection.

    De-Configure VC Snooping

    A snooping connection is deconfigured by a set-request to the
    object ciscoAtmSnoopVcRowStatus to destroy(6), and the agent
    releases all associated resources.

    Parsed from file CISCO-ATM-CONN-MIB.mib
    Module: CISCO-ATM-CONN-MIB

    Description by cisco_v1

    An entry in the Snoop VC table. This entry models a VC snooping
    connection. The ifIndex indicates the snooping interface, the
    atmVclVpi and atmVclVci specifies the VPI and VCI value of the
    snooping connection. To create or destroy a snooping connection
    at an ATM interface, the following procedures are used:

    Configure VC Snooping

    A snooping connection is configured in one step by a set-request
    with all necessary snoop parameter values and set-request to the
    object ciscoAtmSnoopVcRowStatus to createAndGo(4). This may fail
    for the following reasons:
    - The selected snooping VPI/VCI values are unavailable,
    - The selected snooping VPI/VCI values are in use.
    - The selected snooping interface is CPU interface.
    - The selected snooped connection doesn't exist.
    - There is no traffic in the selected snoop direction.
    - Resource failure during configuration of snooping connection.

    De-Configure VC Snooping

    A snooping connection is deconfigured by a set-request to the
    object ciscoAtmSnoopVcRowStatus to destroy(6), and the agent
    releases all associated resources.

    Description by mibdepot

    An entry in the Snoop VC table. This entry models a VC snooping
    connection. The ifIndex indicates the snooping interface, the
    atmVclVpi and atmVclVci specifies the VPI and VCI value of the
    snooping connection. To create or destroy a snooping connection
    at an ATM interface, the following procedures are used:

    Configure VC Snooping

    A snooping connection is configured in one step by a set-request
    with all necessary snoop parameter values and set-request to the
    object ciscoAtmSnoopVcRowStatus to createAndGo(4). This may fail
    for the following reasons:
    - The selected snooping VPI/VCI values are unavailable,
    - The selected snooping VPI/VCI values are in use.
    - The selected snooping interface is CPU interface.
    - The selected snooped connection doesn't exist.
    - There is no traffic in the selected snoop direction.
    - Resource failure during configuration of snooping connection.

    De-Configure VC Snooping

    A snooping connection is deconfigured by a set-request to the
    object ciscoAtmSnoopVcRowStatus to destroy(6), and the agent
    releases all associated resources.

    Parsed from file CISCO-ATM-CONN-MIB.my.txt
    Company: None
    Module: CISCO-ATM-CONN-MIB

    Description by cisco

    An entry in the Snoop VC table. This entry models a VC snooping
    connection. The ifIndex indicates the snooping interface, the
    atmVclVpi and atmVclVci specifies the VPI and VCI value of the
    snooping connection. To create or destroy a snooping connection
    at an ATM interface, the following procedures are used:

    Configure VC Snooping

    A snooping connection is configured in one step by a set-request
    with all necessary snoop parameter values and set-request to the
    object ciscoAtmSnoopVcRowStatus to createAndGo(4). This may fail
    for the following reasons:
    - The selected snooping VPI/VCI values are unavailable,
    - The selected snooping VPI/VCI values are in use.
    - The selected snooping interface is CPU interface.
    - The selected snooped connection doesn't exist.
    - There is no traffic in the selected snoop direction.
    - Resource failure during configuration of snooping connection.

    De-Configure VC Snooping

    A snooping connection is deconfigured by a set-request to the
    object ciscoAtmSnoopVcRowStatus to destroy(6), and the agent
    releases all associated resources.

    Information by circitor

    ciscoAtmSnoopVcEntry OBJECT-TYPE
        SYNTAX     CiscoAtmSnoopVcEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
        "An entry in the Snoop VC table. This entry models a VC snooping 
         connection. The  ifIndex indicates  the snooping interface, the
         atmVclVpi and atmVclVci  specifies the VPI and VCI value of the 
         snooping connection. To create or destroy a snooping connection 
         at an ATM interface, the following procedures are used:
        
         Configure VC Snooping
        
         A snooping connection is configured in one step by a set-request 
         with all necessary snoop parameter values and set-request to the 
         object ciscoAtmSnoopVcRowStatus to createAndGo(4). This may fail 
         for the following reasons:
              - The selected snooping VPI/VCI values are unavailable,
              - The selected snooping VPI/VCI values are in use.
              - The selected snooping interface is CPU interface. 
              - The selected snooped connection doesn't exist.
              - There is no traffic in the selected snoop direction.
              - Resource failure during configuration of snooping connection.

         De-Configure VC Snooping

         A snooping connection is deconfigured by a set-request to the 
         object ciscoAtmSnoopVcRowStatus to destroy(6), and the agent 
         releases all associated resources."
        INDEX { ifIndex, atmVclVpi, atmVclVci }
        ::= { ciscoAtmSnoopVcTable 1 }

    Information by cisco_v1

    ciscoAtmSnoopVcEntry OBJECT-TYPE
    SYNTAX CiscoAtmSnoopVcEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry in the Snoop VC table. This entry models a VC snooping 
         connection. The  ifIndex indicates  the snooping interface, the
         atmVclVpi and atmVclVci  specifies the VPI and VCI value of the 
         snooping connection. To create or destroy a snooping connection 
         at an ATM interface, the following procedures are used:
        
         Configure VC Snooping
        
         A snooping connection is configured in one step by a set-request 
         with all necessary snoop parameter values and set-request to the 
         object ciscoAtmSnoopVcRowStatus to createAndGo(4). This may fail 
         for the following reasons:
              - The selected snooping VPI/VCI values are unavailable,
              - The selected snooping VPI/VCI values are in use.
              - The selected snooping interface is CPU interface. 
              - The selected snooped connection doesn't exist.
              - There is no traffic in the selected snoop direction.
              - Resource failure during configuration of snooping connection.
        
         De-Configure VC Snooping
        
         A snooping connection is deconfigured by a set-request to the 
         object ciscoAtmSnoopVcRowStatus to destroy(6), and the agent 
         releases all associated resources."
    INDEX { ifIndex, atmVclVpi, atmVclVci }
    ::= { ciscoAtmSnoopVcTable 1 }

    Information by oid_info

    Vendor: Cisco
    Module: CISCO-ATM-CONN-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    ciscoAtmSnoopVcEntry OBJECT-TYPE
        SYNTAX     CiscoAtmSnoopVcEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
        "An entry in the Snoop VC table. This entry models a VC snooping 
         connection. The  ifIndex indicates  the snooping interface, the
         atmVclVpi and atmVclVci  specifies the VPI and VCI value of the 
         snooping connection. To create or destroy a snooping connection 
         at an ATM interface, the following procedures are used:
        
         Configure VC Snooping
        
         A snooping connection is configured in one step by a set-request 
         with all necessary snoop parameter values and set-request to the 
         object ciscoAtmSnoopVcRowStatus to createAndGo(4). This may fail 
         for the following reasons:
              - The selected snooping VPI/VCI values are unavailable,
              - The selected snooping VPI/VCI values are in use.
              - The selected snooping interface is CPU interface. 
              - The selected snooped connection doesn't exist.
              - There is no traffic in the selected snoop direction.
              - Resource failure during configuration of snooping connection.

         De-Configure VC Snooping

         A snooping connection is deconfigured by a set-request to the 
         object ciscoAtmSnoopVcRowStatus to destroy(6), and the agent 
         releases all associated resources."
        INDEX { ifIndex, atmVclVpi, atmVclVci }
        ::= { ciscoAtmSnoopVcTable 1 }

    Information by cisco

    ciscoAtmSnoopVcEntry OBJECT-TYPE
        SYNTAX     CiscoAtmSnoopVcEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
        "An entry in the Snoop VC table. This entry models a VC snooping 
         connection. The  ifIndex indicates  the snooping interface, the
         atmVclVpi and atmVclVci  specifies the VPI and VCI value of the 
         snooping connection. To create or destroy a snooping connection 
         at an ATM interface, the following procedures are used:
        
         Configure VC Snooping
        
         A snooping connection is configured in one step by a set-request 
         with all necessary snoop parameter values and set-request to the 
         object ciscoAtmSnoopVcRowStatus to createAndGo(4). This may fail 
         for the following reasons:
              - The selected snooping VPI/VCI values are unavailable,
              - The selected snooping VPI/VCI values are in use.
              - The selected snooping interface is CPU interface. 
              - The selected snooped connection doesn't exist.
              - There is no traffic in the selected snoop direction.
              - Resource failure during configuration of snooping connection.

         De-Configure VC Snooping

         A snooping connection is deconfigured by a set-request to the 
         object ciscoAtmSnoopVcRowStatus to destroy(6), and the agent 
         releases all associated resources."
        INDEX { ifIndex, atmVclVpi, atmVclVci }
        ::= { ciscoAtmSnoopVcTable 1 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Children (6)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.10.13.1.5.1.1.1 ciscoAtmSnoopVcSnoopedIfIndex 0 0 This specifies the ifIndex of the snooped interface.
    1.3.6.1.4.1.9.10.13.1.5.1.1.2 ciscoAtmSnoopVcSnoopedVpi 0 0 This specifies the VPI value of the snooped connection endpoint.
    1.3.6.1.4.1.9.10.13.1.5.1.1.3 ciscoAtmSnoopVcSnoopedVci 0 0 This specifies the VCI value of the snooped connection endpoint.
    1.3.6.1.4.1.9.10.13.1.5.1.1.4 ciscoAtmSnoopVcDir 0 0 This specifies the traffic direction at the snooped connection
    endpoint.
    1.3.6.1.4.1.9.10.13.1.5.1.1.5 ciscoAtmSnoopVcState 0 0 The connection state of this Snooping connetion.
    1.3.6.1.4.1.9.10.13.1.5.1.1.6 ciscoAtmSnoopVcRowStatus 0 0 This object is used to create a new row or delete an existing row
    in this table. This gives the way to configure one-shot per-vc…