Reference record for OID 1.3.6.1.4.1.9.10.13.1.6.1.1

parent

1.3.6.1.4.1.9.10.13.1.6.1 (ciscoAtmSnoopVpTable)

node code

1

node name

ciscoAtmSnoopVpEntry

dot oid

1.3.6.1.4.1.9.10.13.1.6.1.1

type

OBJECT-TYPE

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoExperiment(10) ciscoAtmConnMIB(13) ciscoAtmConnMIBObjects(1) ciscoAtmSnoopVp(6) ciscoAtmSnoopVpTable(1) ciscoAtmSnoopVpEntry(1)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoExperiment(10) ciscoAtmConnMIB(13) ciscoAtmConnMIBObjects(1) ciscoAtmSnoopVp(6) ciscoAtmSnoopVpTable(1) ciscoAtmSnoopVpEntry(1)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoExperiment(10) ciscoAtmConnMIB(13) ciscoAtmConnMIBObjects(1) ciscoAtmSnoopVp(6) ciscoAtmSnoopVpTable(1) ciscoAtmSnoopVpEntry(1)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoExperiment(10) ciscoAtmConnMIB(13) ciscoAtmConnMIBObjects(1) ciscoAtmSnoopVp(6) ciscoAtmSnoopVpTable(1) ciscoAtmSnoopVpEntry(1)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoExperiment(10) ciscoAtmConnMIB(13) ciscoAtmConnMIBObjects(1) ciscoAtmSnoopVp(6) ciscoAtmSnoopVpTable(1) ciscoAtmSnoopVpEntry(1)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoExperiment(10) ciscoAtmConnMIB(13) ciscoAtmConnMIBObjects(1) ciscoAtmSnoopVp(6) ciscoAtmSnoopVpTable(1) ciscoAtmSnoopVpEntry(1)}

iri oid

/iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoExperiment/ciscoAtmConnMIB/ciscoAtmConnMIBObjects/ciscoAtmSnoopVp/ciscoAtmSnoopVpTable/ciscoAtmSnoopVpEntry

/iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoExperiment/ciscoAtmConnMIB/ciscoAtmConnMIBObjects/ciscoAtmSnoopVp/ciscoAtmSnoopVpTable/ciscoAtmSnoopVpEntry

/iso/org/dod/internet/private/enterprise/cisco/ciscoExperiment/ciscoAtmConnMIB/ciscoAtmConnMIBObjects/ciscoAtmSnoopVp/ciscoAtmSnoopVpTable/ciscoAtmSnoopVpEntry

/iso/org/dod/internet/private/enterprises/cisco/ciscoExperiment/ciscoAtmConnMIB/ciscoAtmConnMIBObjects/ciscoAtmSnoopVp/ciscoAtmSnoopVpTable/ciscoAtmSnoopVpEntry

/iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoExperiment/ciscoAtmConnMIB/ciscoAtmConnMIBObjects/ciscoAtmSnoopVp/ciscoAtmSnoopVpTable/ciscoAtmSnoopVpEntry

/iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoExperiment/ciscoAtmConnMIB/ciscoAtmConnMIBObjects/ciscoAtmSnoopVp/ciscoAtmSnoopVpTable/ciscoAtmSnoopVpEntry

iri by oid_info

/ISO/Identified-Organization/6/1/4/1/9/10/13/1/6/1/1

Description by circitor

An entry in the Snoop VP table. This entry models a VP snooping
connection. The ifIndex indicates the snooping interface, the
atmVclVpi specifies the VPI value of the snooping connection. To
create or destroy a snooping connection at an ATM interface, the
following procedures are used:

Configure VP Snooping

A snooping connection is configured in one step by a set-request
with all necessary snoop parameter values and set-request to the
object ciscoAtmSnoopVpRowStatus to createAndGo(4). This may fail
for the following reasons:
- The selected snooping VPI values are unavailable,
- The selected snooping VPI values are in use.
- The selected snooping interface is CPU interface.
- The selected snooped connection doesn't exist.
- There is no traffic in the selected snoop direction.
- Resource failure during configuration of snooping connection.

De-Configure VP Snooping

A snooping connection is deconfigured by a set-request to the
object ciscoAtmSnoopVpRowStatus to destroy(6), and the agent
releases all associated resources.

Parsed from file CISCO-ATM-CONN-MIB.mib
Module: CISCO-ATM-CONN-MIB

Description by cisco_v1

An entry in the Snoop VP table. This entry models a VP snooping
connection. The ifIndex indicates the snooping interface, the
atmVclVpi specifies the VPI value of the snooping connection. To
create or destroy a snooping connection at an ATM interface, the
following procedures are used:

Configure VP Snooping

A snooping connection is configured in one step by a set-request
with all necessary snoop parameter values and set-request to the
object ciscoAtmSnoopVpRowStatus to createAndGo(4). This may fail
for the following reasons:
- The selected snooping VPI values are unavailable,
- The selected snooping VPI values are in use.
- The selected snooping interface is CPU interface.
- The selected snooped connection doesn't exist.
- There is no traffic in the selected snoop direction.
- Resource failure during configuration of snooping connection.

De-Configure VP Snooping

A snooping connection is deconfigured by a set-request to the
object ciscoAtmSnoopVpRowStatus to destroy(6), and the agent
releases all associated resources.

Description by mibdepot

An entry in the Snoop VP table. This entry models a VP snooping
connection. The ifIndex indicates the snooping interface, the
atmVclVpi specifies the VPI value of the snooping connection. To
create or destroy a snooping connection at an ATM interface, the
following procedures are used:

Configure VP Snooping

A snooping connection is configured in one step by a set-request
with all necessary snoop parameter values and set-request to the
object ciscoAtmSnoopVpRowStatus to createAndGo(4). This may fail
for the following reasons:
- The selected snooping VPI values are unavailable,
- The selected snooping VPI values are in use.
- The selected snooping interface is CPU interface.
- The selected snooped connection doesn't exist.
- There is no traffic in the selected snoop direction.
- Resource failure during configuration of snooping connection.

De-Configure VP Snooping

A snooping connection is deconfigured by a set-request to the
object ciscoAtmSnoopVpRowStatus to destroy(6), and the agent
releases all associated resources.

Parsed from file CISCO-ATM-CONN-MIB.my.txt
Company: None
Module: CISCO-ATM-CONN-MIB

Description by cisco

An entry in the Snoop VP table. This entry models a VP snooping
connection. The ifIndex indicates the snooping interface, the
atmVclVpi specifies the VPI value of the snooping connection. To
create or destroy a snooping connection at an ATM interface, the
following procedures are used:

Configure VP Snooping

A snooping connection is configured in one step by a set-request
with all necessary snoop parameter values and set-request to the
object ciscoAtmSnoopVpRowStatus to createAndGo(4). This may fail
for the following reasons:
- The selected snooping VPI values are unavailable,
- The selected snooping VPI values are in use.
- The selected snooping interface is CPU interface.
- The selected snooped connection doesn't exist.
- There is no traffic in the selected snoop direction.
- Resource failure during configuration of snooping connection.

De-Configure VP Snooping

A snooping connection is deconfigured by a set-request to the
object ciscoAtmSnoopVpRowStatus to destroy(6), and the agent
releases all associated resources.

Information by circitor

ciscoAtmSnoopVpEntry OBJECT-TYPE
        SYNTAX     CiscoAtmSnoopVpEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
        "An entry in the Snoop VP table. This entry models a VP snooping 
         connection. The  ifIndex indicates  the snooping interface, the
         atmVclVpi specifies the VPI value of the snooping connection. To 
         create or destroy a snooping connection at an ATM interface, the 
         following procedures are used:
        
         Configure VP Snooping
        
         A snooping connection is configured in one step by a set-request 
         with all necessary snoop parameter values and set-request to the 
         object ciscoAtmSnoopVpRowStatus to createAndGo(4). This may fail 
         for the following reasons:
              - The selected snooping VPI values are unavailable,
              - The selected snooping VPI values are in use.
              - The selected snooping interface is CPU interface. 
              - The selected snooped connection doesn't exist.
              - There is no traffic in the selected snoop direction.
              - Resource failure during configuration of snooping connection.

         De-Configure VP Snooping

         A snooping connection is deconfigured by a set-request to the 
         object ciscoAtmSnoopVpRowStatus to destroy(6), and the agent 
         releases all associated resources."
        INDEX { ifIndex, atmVplVpi }
        ::= { ciscoAtmSnoopVpTable 1 }

Information by cisco_v1

ciscoAtmSnoopVpEntry OBJECT-TYPE
    SYNTAX CiscoAtmSnoopVpEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "An entry in the Snoop VP table. This entry models a VP snooping 
         connection. The  ifIndex indicates  the snooping interface, the
         atmVclVpi specifies the VPI value of the snooping connection. To 
         create or destroy a snooping connection at an ATM interface, the 
         following procedures are used:
        
         Configure VP Snooping
        
         A snooping connection is configured in one step by a set-request 
         with all necessary snoop parameter values and set-request to the 
         object ciscoAtmSnoopVpRowStatus to createAndGo(4). This may fail 
         for the following reasons:
              - The selected snooping VPI values are unavailable,
              - The selected snooping VPI values are in use.
              - The selected snooping interface is CPU interface. 
              - The selected snooped connection doesn't exist.
              - There is no traffic in the selected snoop direction.
              - Resource failure during configuration of snooping connection.
        
         De-Configure VP Snooping
        
         A snooping connection is deconfigured by a set-request to the 
         object ciscoAtmSnoopVpRowStatus to destroy(6), and the agent 
         releases all associated resources."
    INDEX { ifIndex, atmVplVpi }
    ::= { ciscoAtmSnoopVpTable 1 }

Information by oid_info

Vendor: Cisco
Module: CISCO-ATM-CONN-MIB

[Automatically extracted from oidview.com]

Information by mibdepot

ciscoAtmSnoopVpEntry OBJECT-TYPE
        SYNTAX     CiscoAtmSnoopVpEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
        "An entry in the Snoop VP table. This entry models a VP snooping 
         connection. The  ifIndex indicates  the snooping interface, the
         atmVclVpi specifies the VPI value of the snooping connection. To 
         create or destroy a snooping connection at an ATM interface, the 
         following procedures are used:
        
         Configure VP Snooping
        
         A snooping connection is configured in one step by a set-request 
         with all necessary snoop parameter values and set-request to the 
         object ciscoAtmSnoopVpRowStatus to createAndGo(4). This may fail 
         for the following reasons:
              - The selected snooping VPI values are unavailable,
              - The selected snooping VPI values are in use.
              - The selected snooping interface is CPU interface. 
              - The selected snooped connection doesn't exist.
              - There is no traffic in the selected snoop direction.
              - Resource failure during configuration of snooping connection.

         De-Configure VP Snooping

         A snooping connection is deconfigured by a set-request to the 
         object ciscoAtmSnoopVpRowStatus to destroy(6), and the agent 
         releases all associated resources."
        INDEX { ifIndex, atmVplVpi }
        ::= { ciscoAtmSnoopVpTable 1 }

Information by cisco

ciscoAtmSnoopVpEntry OBJECT-TYPE
        SYNTAX     CiscoAtmSnoopVpEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
        "An entry in the Snoop VP table. This entry models a VP snooping 
         connection. The  ifIndex indicates  the snooping interface, the
         atmVclVpi specifies the VPI value of the snooping connection. To 
         create or destroy a snooping connection at an ATM interface, the 
         following procedures are used:
        
         Configure VP Snooping
        
         A snooping connection is configured in one step by a set-request 
         with all necessary snoop parameter values and set-request to the 
         object ciscoAtmSnoopVpRowStatus to createAndGo(4). This may fail 
         for the following reasons:
              - The selected snooping VPI values are unavailable,
              - The selected snooping VPI values are in use.
              - The selected snooping interface is CPU interface. 
              - The selected snooped connection doesn't exist.
              - There is no traffic in the selected snoop direction.
              - Resource failure during configuration of snooping connection.

         De-Configure VP Snooping

         A snooping connection is deconfigured by a set-request to the 
         object ciscoAtmSnoopVpRowStatus to destroy(6), and the agent 
         releases all associated resources."
        INDEX { ifIndex, atmVplVpi }
        ::= { ciscoAtmSnoopVpTable 1 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Greg Satz

Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Cisco Systems, Inc.

Children (5)