The RowStatus object by which peers can be added and
deleted. A transition to 'active' will cause the MSDP
'Enable MSDP peering with P' Event to be generated. A
transition out of the 'active' state will cause the MSDP
'Disable MSDP peering with P' Event to be generated. Care
should be used in providing write access to this object
without adequate authentication.
cMsdpPeerRemoteAddress is the only variable that must be set
to a valid value before the row can be activated. Since
this is the table's INDEX, a row can be activated by simply
setting the cMsdpPeerStatus variable.
It is possible to modify other columns in the same
conceptual row when the status value is active(1).
Parsed from file CISCO-IETF-MSDP-MIB.mib
Module: CISCO-IETF-MSDP-MIB
The RowStatus object by which peers can be added and
deleted. A transition to 'active' will cause the MSDP
'Enable MSDP peering with P' Event to be generated. A
transition out of the 'active' state will cause the MSDP
'Disable MSDP peering with P' Event to be generated. Care
should be used in providing write access to this object
without adequate authentication.
cMsdpPeerRemoteAddress is the only variable that must be set
to a valid value before the row can be activated. Since
this is the table's INDEX, a row can be activated by simply
setting the cMsdpPeerStatus variable.
It is possible to modify other columns in the same
conceptual row when the status value is active(1).
The RowStatus object by which peers can be added and
deleted. A transition to 'active' will cause the MSDP
'Enable MSDP peering with P' Event to be generated. A
transition out of the 'active' state will cause the MSDP
'Disable MSDP peering with P' Event to be generated. Care
should be used in providing write access to this object
without adequate authentication.
cMsdpPeerRemoteAddress is the only variable that must be set
to a valid value before the row can be activated. Since
this is the table's INDEX, a row can be activated by simply
setting the cMsdpPeerStatus variable.
It is possible to modify other columns in the same
conceptual row when the status value is active(1).
Parsed from file CISCO-IETF-MSDP-MIB.my.txt
Company: None
Module: CISCO-IETF-MSDP-MIB
The RowStatus object by which peers can be added and
deleted. A transition to 'active' will cause the MSDP
'Enable MSDP peering with P' Event to be generated. A
transition out of the 'active' state will cause the MSDP
'Disable MSDP peering with P' Event to be generated. Care
should be used in providing write access to this object
without adequate authentication.
cMsdpPeerRemoteAddress is the only variable that must be set
to a valid value before the row can be activated. Since
this is the table's INDEX, a row can be activated by simply
setting the cMsdpPeerStatus variable.
It is possible to modify other columns in the same
conceptual row when the status value is active(1).
cMsdpPeerStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus object by which peers can be added and deleted. A transition to 'active' will cause the MSDP 'Enable MSDP peering with P' Event to be generated. A transition out of the 'active' state will cause the MSDP 'Disable MSDP peering with P' Event to be generated. Care should be used in providing write access to this object without adequate authentication. cMsdpPeerRemoteAddress is the only variable that must be set to a valid value before the row can be activated. Since this is the table's INDEX, a row can be activated by simply setting the cMsdpPeerStatus variable. It is possible to modify other columns in the same conceptual row when the status value is active(1)." REFERENCE "RFC 3618 section 11.1" ::= { cMsdpPeerEntry 25 }
cMsdpPeerStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The RowStatus object by which peers can be added and deleted. A transition to 'active' will cause the MSDP 'Enable MSDP peering with P' Event to be generated. A transition out of the 'active' state will cause the MSDP 'Disable MSDP peering with P' Event to be generated. Care should be used in providing write access to this object without adequate authentication. cMsdpPeerRemoteAddress is the only variable that must be set to a valid value before the row can be activated. Since this is the table's INDEX, a row can be activated by simply setting the cMsdpPeerStatus variable. It is possible to modify other columns in the same conceptual row when the status value is active(1)." REFERENCE "RFC 3618 section 11.1" ::= { cMsdpPeerEntry 25 }
Vendor: Cisco
Module: CISCO-IETF-MSDP-MIB
[Automatically extracted from oidview.com]
cMsdpPeerStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus object by which peers can be added and deleted. A transition to 'active' will cause the MSDP 'Enable MSDP peering with P' Event to be generated. A transition out of the 'active' state will cause the MSDP 'Disable MSDP peering with P' Event to be generated. Care should be used in providing write access to this object without adequate authentication. cMsdpPeerRemoteAddress is the only variable that must be set to a valid value before the row can be activated. Since this is the table's INDEX, a row can be activated by simply setting the cMsdpPeerStatus variable. It is possible to modify other columns in the same conceptual row when the status value is active(1)." REFERENCE "RFC 3618 section 11.1" ::= { cMsdpPeerEntry 25 }
cMsdpPeerStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus object by which peers can be added and deleted. A transition to 'active' will cause the MSDP 'Enable MSDP peering with P' Event to be generated. A transition out of the 'active' state will cause the MSDP 'Disable MSDP peering with P' Event to be generated. Care should be used in providing write access to this object without adequate authentication. cMsdpPeerRemoteAddress is the only variable that must be set to a valid value before the row can be activated. Since this is the table's INDEX, a row can be activated by simply setting the cMsdpPeerStatus variable. It is possible to modify other columns in the same conceptual row when the status value is active(1)." REFERENCE "RFC 3618 section 11.1" ::= { cMsdpPeerEntry 25 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.130.1.1.5.1.1 | cMsdpPeerRemoteAddress | 0 | 0 | The address of the remote MSDP peer. |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.3 | cMsdpPeerState | 0 | 0 | The state of the MSDP TCP connection with this peer. |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.4 | cMsdpPeerRPFFailures | 0 | 0 | The number of SA messages received from this peer which failed the Peer-RPF check. Discontinuities in the value of this counter c… |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.5 | cMsdpPeerInSAs | 0 | 0 | The number of MSDP SA messages received on this connection. Discontinuities in the value of this counter can occur at re-initiali… |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.6 | cMsdpPeerOutSAs | 0 | 0 | The number of MSDP SA messages transmitted on this connection. Discontinuities in the value of this counter can occur at re-initia… |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.7 | cMsdpPeerInSARequests | 0 | 0 | The number of MSDP SA-Request messages received on this connection. Discontinuities in the value of this counter can occur at re-i… |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.8 | cMsdpPeerOutSARequests | 0 | 0 | The number of MSDP SA-Request messages transmitted on this connection. Discontinuities in the value of this counter can occur at r… |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.9 | cMsdpPeerInSAResponses | 0 | 0 | The number of MSDP SA-Response messages received on this connection. Discontinuities in the value of this counter can occur at re-… |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.10 | cMsdpPeerOutSAResponses | 0 | 0 | The number of MSDP SA Response messages transmitted on this TCP connection. Discontinuities in the value of this counter can occu… |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.11 | cMsdpPeerInControlMessages | 0 | 0 | The total number of MSDP messages, excluding encapsulated data packets, received on this TCP connection. Discontinuities in the v… |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.12 | cMsdpPeerOutControlMessages | 0 | 0 | The total number of MSDP messages, excluding encapsulated data packets, transmitted on this TCP connection. Discontinuities in th… |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.13 | cMsdpPeerInDataPackets | 0 | 0 | The total number of encapsulated data packets received from this peer. Discontinuities in the value of this counter can occur at r… |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.14 | cMsdpPeerOutDataPackets | 0 | 0 | The total number of encapsulated data packets sent to this peer. Discontinuities in the value of this counter can occur at re-init… |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.15 | cMsdpPeerFsmEstablishedTransitions | 0 | 0 | The total number of times the MSDP FSM transitioned into the ESTABLISHED state. |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.16 | cMsdpPeerFsmEstablishedTime | 0 | 0 | This timestamp is set to the value of sysUpTime when a peer transitions into or out of the ESTABLISHED state. It is set to zero … |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.17 | cMsdpPeerInMessageTime | 0 | 0 | The sysUpTime value when the last MSDP message was received from the peer. It is set to zero when the MSDP speaker is booted. |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.18 | cMsdpPeerLocalAddress | 0 | 0 | The local IP address used for this entry's MSDP TCP connection. |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.20 | cMsdpPeerConnectRetryInterval | 0 | 0 | Time interval in seconds for the [ConnectRetry-period] for this peer. |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.21 | cMsdpPeerHoldTimeConfigured | 0 | 0 | Time interval in seconds for the [HoldTime-Period] configured for this MSDP speaker with this peer. If the value of this object … |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.22 | cMsdpPeerKeepAliveConfigured | 0 | 0 | Time interval in seconds for the [KeepAlive-Period] configured for this MSDP speaker with this peer. If the value of this object… |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.23 | cMsdpPeerDataTtl | 0 | 0 | The minimum TTL a packet is required to have before it may be forwarded using SA encapsulation to this peer. |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.24 | cMsdpPeerProcessRequestsFrom | 0 | 0 | This object indicates whether or not to process MSDP SA Request messages from this peer. If True(1), MSDP SA Request messages fr… |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.26 | cMsdpPeerRemotePort | 0 | 0 | The remote port for the TCP connection between the MSDP peers. |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.27 | cMsdpPeerLocalPort | 0 | 0 | The local port for the TCP connection between the MSDP peers. |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.29 | cMsdpPeerEncapsulationType | 0 | 0 | The encapsulation in use when encapsulating data in SA messages to this peer. |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.30 | cMsdpPeerConnectionAttempts | 0 | 0 | The number of times the state machine has transitioned from INACTIVE to CONNECTING. |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.31 | cMsdpPeerInNotifications | 0 | 0 | The number of MSDP Notification messages received from this peer. This object is deprecated because MSDP Notifications have been r… |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.32 | cMsdpPeerOutNotifications | 0 | 0 | The number of MSDP Notification messages transmitted to this peer. This object is deprecated because MSDP Notifications have been … |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.33 | cMsdpPeerLastError | 0 | 0 | The last error code and subcode received via Notification from this peer. If no error has occurred, this field is zero. Otherwi… |
| 1.3.6.1.4.1.9.10.130.1.1.5.1.34 | cMsdpPeerDiscontinuityTime | 0 | 0 | The value of sysUpTime on the most recent occasion at which one or more of this entry's counters suffered a discontinuity. See t… |