The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the cdbpPeerVendorRowStatus column
is 'notReady'.
In particular, a newly created row cannot be made
active until the corresponding cdbpPeerVendorId has been
set. Also, a newly created row cannot be made active until
the corresponding 'cdbpPeerIndex' has been set.
cdbpPeerVendorId may not be modified while the
value of this object is active(1):
An attempt to set these objects while the value of
cdbpPeerVendorRowStatus is active(1) will result in
an inconsistentValue error.
Entries in this table with cdbpPeerVendorRowStatus equal to
active(1) remain in the table until destroyed.
Entries in this table with cdbpPeerVendorRowStatus equal to
values other than active(1) will be destroyed after timeout
(5 minutes).
Parsed from file CISCO-DIAMETER-BASE-PROTOCOL-MIB.mib
Module: CISCO-DIAMETER-BASE-PROTOCOL-MIB
The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the cdbpPeerVendorRowStatus column
is 'notReady'.
In particular, a newly created row cannot be made
active until the corresponding cdbpPeerVendorId has been
set. Also, a newly created row cannot be made active until
the corresponding 'cdbpPeerIndex' has been set.
cdbpPeerVendorId may not be modified while the
value of this object is active(1):
An attempt to set these objects while the value of
cdbpPeerVendorRowStatus is active(1) will result in
an inconsistentValue error.
Entries in this table with cdbpPeerVendorRowStatus equal to
active(1) remain in the table until destroyed.
Entries in this table with cdbpPeerVendorRowStatus equal to
values other than active(1) will be destroyed after timeout
(5 minutes).
The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the cdbpPeerVendorRowStatus column
is 'notReady'.
In particular, a newly created row cannot be made
active until the corresponding cdbpPeerVendorId has been
set. Also, a newly created row cannot be made active until
the corresponding 'cdbpPeerIndex' has been set.
cdbpPeerVendorId may not be modified while the
value of this object is active(1):
An attempt to set these objects while the value of
cdbpPeerVendorRowStatus is active(1) will result in
an inconsistentValue error.
Entries in this table with cdbpPeerVendorRowStatus equal to
active(1) remain in the table until destroyed.
Entries in this table with cdbpPeerVendorRowStatus equal to
values other than active(1) will be destroyed after timeout
(5 minutes).
Parsed from file CISCO-DIAMETER-BASE-PROTOCOL-MIB.my.txt
Company: None
Module: CISCO-DIAMETER-BASE-PROTOCOL-MIB
The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the cdbpPeerVendorRowStatus column
is 'notReady'.
In particular, a newly created row cannot be made
active until the corresponding cdbpPeerVendorId has been
set. Also, a newly created row cannot be made active until
the corresponding 'cdbpPeerIndex' has been set.
cdbpPeerVendorId may not be modified while the
value of this object is active(1):
An attempt to set these objects while the value of
cdbpPeerVendorRowStatus is active(1) will result in
an inconsistentValue error.
Entries in this table with cdbpPeerVendorRowStatus equal to
active(1) remain in the table until destroyed.
Entries in this table with cdbpPeerVendorRowStatus equal to
values other than active(1) will be destroyed after timeout
(5 minutes).
cdbpPeerVendorRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the cdbpPeerVendorRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding cdbpPeerVendorId has been set. Also, a newly created row cannot be made active until the corresponding 'cdbpPeerIndex' has been set. cdbpPeerVendorId may not be modified while the value of this object is active(1): An attempt to set these objects while the value of cdbpPeerVendorRowStatus is active(1) will result in an inconsistentValue error. Entries in this table with cdbpPeerVendorRowStatus equal to active(1) remain in the table until destroyed. Entries in this table with cdbpPeerVendorRowStatus equal to values other than active(1) will be destroyed after timeout (5 minutes)." ::= { cdbpPeerVendorEntry 4 }
cdbpPeerVendorRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the cdbpPeerVendorRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding cdbpPeerVendorId has been set. Also, a newly created row cannot be made active until the corresponding 'cdbpPeerIndex' has been set. cdbpPeerVendorId may not be modified while the value of this object is active(1): An attempt to set these objects while the value of cdbpPeerVendorRowStatus is active(1) will result in an inconsistentValue error. Entries in this table with cdbpPeerVendorRowStatus equal to active(1) remain in the table until destroyed. Entries in this table with cdbpPeerVendorRowStatus equal to values other than active(1) will be destroyed after timeout (5 minutes)." ::= { cdbpPeerVendorEntry 4 }
Vendor: Cisco
Module: CISCO-DIAMETER-BASE-PROTOCOL-MIB
[Automatically extracted from oidview.com]
cdbpPeerVendorRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the cdbpPeerVendorRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding cdbpPeerVendorId has been set. Also, a newly created row cannot be made active until the corresponding 'cdbpPeerIndex' has been set. cdbpPeerVendorId may not be modified while the value of this object is active(1): An attempt to set these objects while the value of cdbpPeerVendorRowStatus is active(1) will result in an inconsistentValue error. Entries in this table with cdbpPeerVendorRowStatus equal to active(1) remain in the table until destroyed. Entries in this table with cdbpPeerVendorRowStatus equal to values other than active(1) will be destroyed after timeout (5 minutes)." ::= { cdbpPeerVendorEntry 4 }
cdbpPeerVendorRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the cdbpPeerVendorRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding cdbpPeerVendorId has been set. Also, a newly created row cannot be made active until the corresponding 'cdbpPeerIndex' has been set. cdbpPeerVendorId may not be modified while the value of this object is active(1): An attempt to set these objects while the value of cdbpPeerVendorRowStatus is active(1) will result in an inconsistentValue error. Entries in this table with cdbpPeerVendorRowStatus equal to active(1) remain in the table until destroyed. Entries in this table with cdbpPeerVendorRowStatus equal to values other than active(1) will be destroyed after timeout (5 minutes)." ::= { cdbpPeerVendorEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.133.1.3.4.1.1 | cdbpPeerVendorIndex | 0 | 0 | A number uniquely identifying the Vendor ID supported by the peer. Upon reload, cdbpPeerVendorIndex values may be changed. |
| 1.3.6.1.4.1.9.10.133.1.3.4.1.2 | cdbpPeerVendorId | 0 | 0 | The active vendor ID used for peer connections. diameterVendorIetf(0) - Diameter vendor id ietf diameterVendorCisco(9) … |
| 1.3.6.1.4.1.9.10.133.1.3.4.1.3 | cdbpPeerVendorStorageType | 0 | 0 | The storage type for this conceptual row. None of the objects are writable when the conceptual row is permanent. |