This table specifies information for configuring
and monitoring BGP-specific parameters for VPLS.
A row is automatically created when a VPLS is
configured using BGP signalling.
None of the read-write objects values can be
changed when cvplsConfigRowStatus is in the active(1)
state. Changes are allowed when the cvplsConfigRowStatus
is in notInService(2) or notReady(3) states only.
If the operator need to change one of the values
for an active row the cvplsConfigRowStatus should be
first changed to notInService(2), the objects may
be changed now, and later to active(1) in order to
re-initiate the signaling process with the new
values in effect.
Parsed from file CISCO-IETF-VPLS-BGP-EXT-MIB.mib
Module: CISCO-IETF-VPLS-BGP-EXT-MIB
This table specifies information for configuring
and monitoring BGP-specific parameters for VPLS.
A row is automatically created when a VPLS is
configured using BGP signalling.
None of the read-write objects values can be
changed when cvplsConfigRowStatus is in the active(1)
state. Changes are allowed when the cvplsConfigRowStatus
is in notInService(2) or notReady(3) states only.
If the operator need to change one of the values
for an active row the cvplsConfigRowStatus should be
first changed to notInService(2), the objects may
be changed now, and later to active(1) in order to
re-initiate the signaling process with the new
values in effect.
This table specifies information for configuring
and monitoring BGP-specific parameters for VPLS.
A row is automatically created when a VPLS is
configured using BGP signalling.
None of the read-write objects values can be
changed when cvplsConfigRowStatus is in the active(1)
state. Changes are allowed when the cvplsConfigRowStatus
is in notInService(2) or notReady(3) states only.
If the operator need to change one of the values
for an active row the cvplsConfigRowStatus should be
first changed to notInService(2), the objects may
be changed now, and later to active(1) in order to
re-initiate the signaling process with the new
values in effect.
Parsed from file CISCO-IETF-VPLS-BGP-EXT-MIB.my.txt
Company: None
Module: CISCO-IETF-VPLS-BGP-EXT-MIB
This table specifies information for configuring
and monitoring BGP-specific parameters for VPLS.
A row is automatically created when a VPLS is
configured using BGP signalling.
None of the read-write objects values can be
changed when cvplsConfigRowStatus is in the active(1)
state. Changes are allowed when the cvplsConfigRowStatus
is in notInService(2) or notReady(3) states only.
If the operator need to change one of the values
for an active row the cvplsConfigRowStatus should be
first changed to notInService(2), the objects may
be changed now, and later to active(1) in order to
re-initiate the signaling process with the new
values in effect.
ciVplsBgpExtConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CiVplsBgpExtConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies information for configuring and monitoring BGP-specific parameters for VPLS. A row is automatically created when a VPLS is configured using BGP signalling. None of the read-write objects values can be changed when cvplsConfigRowStatus is in the active(1) state. Changes are allowed when the cvplsConfigRowStatus is in notInService(2) or notReady(3) states only. If the operator need to change one of the values for an active row the cvplsConfigRowStatus should be first changed to notInService(2), the objects may be changed now, and later to active(1) in order to re-initiate the signaling process with the new values in effect." ::= { ciscoIetfVplsBgpExtMIBObjects 1 }
ciVplsBgpExtConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CiVplsBgpExtConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table specifies information for configuring and monitoring BGP-specific parameters for VPLS. A row is automatically created when a VPLS is configured using BGP signalling. None of the read-write objects values can be changed when cvplsConfigRowStatus is in the active(1) state. Changes are allowed when the cvplsConfigRowStatus is in notInService(2) or notReady(3) states only. If the operator need to change one of the values for an active row the cvplsConfigRowStatus should be first changed to notInService(2), the objects may be changed now, and later to active(1) in order to re-initiate the signaling process with the new values in effect." ::= { ciscoIetfVplsBgpExtMIBObjects 1 }
Vendor: Cisco
Module: CISCO-IETF-VPLS-BGP-EXT-MIB
[Automatically extracted from oidview.com]
ciVplsBgpExtConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CiVplsBgpExtConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies information for configuring and monitoring BGP-specific parameters for VPLS. A row is automatically created when a VPLS is configured using BGP signalling. None of the read-write objects values can be changed when cvplsConfigRowStatus is in the active(1) state. Changes are allowed when the cvplsConfigRowStatus is in notInService(2) or notReady(3) states only. If the operator need to change one of the values for an active row the cvplsConfigRowStatus should be first changed to notInService(2), the objects may be changed now, and later to active(1) in order to re-initiate the signaling process with the new values in effect." ::= { ciscoIetfVplsBgpExtMIBObjects 1 }
ciVplsBgpExtConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CiVplsBgpExtConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies information for configuring and monitoring BGP-specific parameters for VPLS. A row is automatically created when a VPLS is configured using BGP signalling. None of the read-write objects values can be changed when cvplsConfigRowStatus is in the active(1) state. Changes are allowed when the cvplsConfigRowStatus is in notInService(2) or notReady(3) states only. If the operator need to change one of the values for an active row the cvplsConfigRowStatus should be first changed to notInService(2), the objects may be changed now, and later to active(1) in order to re-initiate the signaling process with the new values in effect." ::= { ciscoIetfVplsBgpExtMIBObjects 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.140.1.1.1 | ciVplsBgpExtConfigEntry | 2 | 2 | Each Entry represents a conceptual row in ciVplsBgpExtConfigTable and provides the information about BGP-specific information for… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.140.1.2 | civplsBgpExtRTTable | 1 | 5 | This table specifies information for the list of RTs imported or exported by BGP during auto-discovery of VPLS. |
| 1.3.6.1.4.1.9.10.140.1.3 | ciVplsBgpExtVETable | 1 | 6 | This table associates VPLS Edge devices to a VPLS. The VEs assigned to a VPLS can be configured on a PE. This table has an expans… |
| 1.3.6.1.4.1.9.10.140.1.4 | ciVplsBgpExtPwBindTable | 1 | 3 | This table provides BGP-specific information for an association between a VPLS and the corresponding Pseudo Wires. A service can … |