This field is set to the number of the channel that is
currently switched to protection. The value 0 indicates
no channel is switched to protection. The values 1-14
indicate that working channel is switched to protection.
Parsed from file CISCO-APS-MIB.mib
Module: CISCO-APS-MIB
This field is set to the number of the channel that is
currently switched to protection. The value 0 indicates
no channel is switched to protection. The values 1-14
indicate that working channel is switched to protection.
This field is set to the number of the channel that is
currently switched to protection. The value 0 indicates
no channel is switched to protection. The values 1-14
indicate that working channel is switched to protection.
Parsed from file CISCO-APS-MIB.my.txt
Company: None
Module: CISCO-APS-MIB
This field is set to the number of the channel that is
currently switched to protection. The value 0 indicates
no channel is switched to protection. The values 1-14
indicate that working channel is switched to protection.
cApsStatusSwitchedChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This field is set to the number of the channel that is currently switched to protection. The value 0 indicates no channel is switched to protection. The values 1-14 indicate that working channel is switched to protection." ::= { cApsStatusEntry 8 }
cApsStatusSwitchedChannel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field is set to the number of the channel that is currently switched to protection. The value 0 indicates no channel is switched to protection. The values 1-14 indicate that working channel is switched to protection." ::= { cApsStatusEntry 8 }
Vendor: Cisco
Module: CISCO-APS-MIB
[Automatically extracted from oidview.com]
cApsStatusSwitchedChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This field is set to the number of the channel that is currently switched to protection. The value 0 indicates no channel is switched to protection. The values 1-14 indicate that working channel is switched to protection." ::= { cApsStatusEntry 8 }
cApsStatusSwitchedChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This field is set to the number of the channel that is currently switched to protection. The value 0 indicates no channel is switched to protection. The values 1-14 indicate that working channel is switched to protection." ::= { cApsStatusEntry 8 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.10.71.1.2.1.1 | cApsStatusK1K2Rcv | 0 | 0 | The current value of the K1 and K2 bytes received on the protection channel. |
1.3.6.1.4.1.9.10.71.1.2.1.2 | cApsStatusK1K2Trans | 0 | 0 | The current value of the K1 and K2 bytes transmitted on the protection channel. |
1.3.6.1.4.1.9.10.71.1.2.1.3 | cApsStatusCurrent | 0 | 0 | The current status of the APS group. modeMismatch Modes other than 1+1 unidirectional monitor protection line K2 bit 5, which in… |
1.3.6.1.4.1.9.10.71.1.2.1.4 | cApsStatusModeMismatches | 0 | 0 | A count of Mode Mismatch conditions. |
1.3.6.1.4.1.9.10.71.1.2.1.5 | cApsStatusChannelMismatches | 0 | 0 | A count of Channel Mismatch conditions. |
1.3.6.1.4.1.9.10.71.1.2.1.6 | cApsStatusPSBFs | 0 | 0 | A count of Protection Switch Byte Failure conditions. This condition occurs when either an inconsistent APS byte or an invalid co… |
1.3.6.1.4.1.9.10.71.1.2.1.7 | cApsStatusFEPLFs | 0 | 0 | A count of Far-End Protection-Line Failure conditions. This condition is declared based on receiving SF on the protection line in… |