Not aligned timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is only applicable if cSpLinkType
is serial. A get on this object will return a
zero if cSpLinkType is not serial.
Parsed from file CISCO-SP-MIB.mib
Module: CISCO-SP-MIB
Not aligned timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is only applicable if cSpLinkType
is serial. A get on this object will return a
zero if cSpLinkType is not serial.
Not aligned timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is only applicable if cSpLinkType
is serial. A get on this object will return a
zero if cSpLinkType is not serial.
Parsed from file CISCO-SP-MIB.my.txt
Company: None
Module: CISCO-SP-MIB
Not aligned timer. The default and valid range is
dependant on the value of cSpSs7Variant.
The ranges are defined in the following references.
This timer is only applicable if cSpLinkType
is serial. A get on this object will return a
zero if cSpLinkType is not serial.
cSpMtp2T02 OBJECT-TYPE SYNTAX Unsigned32 UNITS "100 milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Not aligned timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial. A get on this object will return a zero if cSpLinkType is not serial." REFERENCE "ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP)." ::= { cSpScalars 4 }
cSpMtp2T02 OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Not aligned timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial. A get on this object will return a zero if cSpLinkType is not serial." REFERENCE "ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP)." ::= { cSpScalars 4 }
Vendor: Cisco
Module: CISCO-SP-MIB
[Automatically extracted from oidview.com]
cSpMtp2T02 OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Not aligned timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial. A get on this object will return a zero if cSpLinkType is not serial." REFERENCE "ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP)." ::= { cSpScalars 4 }
cSpMtp2T02 OBJECT-TYPE SYNTAX Unsigned32 UNITS "100 milli-seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Not aligned timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial. A get on this object will return a zero if cSpLinkType is not serial." REFERENCE "ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP)." ::= { cSpScalars 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.73.1.1.4.0 | cSpMtp2T02 | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.73.1.1.1 | cSpSs7Variant | 1 | 1 | The SS7 variant implemented in this SP. |
| 1.3.6.1.4.1.9.10.73.1.1.2 | cSpPointCode | 1 | 1 | The point code for this SP. |
| 1.3.6.1.4.1.9.10.73.1.1.3 | cSpMtp2T01 | 1 | 1 | Alignment ready timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the foll… |
| 1.3.6.1.4.1.9.10.73.1.1.5 | cSpMtp2T03 | 1 | 1 | Aligned timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following re… |
| 1.3.6.1.4.1.9.10.73.1.1.6 | cSpMtp2T4N | 1 | 1 | Proving period timer normal timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined… |
| 1.3.6.1.4.1.9.10.73.1.1.7 | cSpMtp2T4E | 1 | 1 | Proving period timer emergency timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are def… |
| 1.3.6.1.4.1.9.10.73.1.1.8 | cSpMtp2T05 | 1 | 1 | Sending SIB timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the followin… |
| 1.3.6.1.4.1.9.10.73.1.1.9 | cSpMtp2T06 | 1 | 1 | Remote congestion timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the fo… |
| 1.3.6.1.4.1.9.10.73.1.1.10 | cSpMtp2T07 | 1 | 1 | Excessive delay of acknowledgement timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are … |
| 1.3.6.1.4.1.9.10.73.1.1.11 | cSpMtp2T08 | 1 | 1 | Interval timer for error interval monitor. |
| 1.3.6.1.4.1.9.10.73.1.1.12 | cSpMtp3T01 | 1 | 1 | Delay to avoid message mis-sequencing on changeover. |
| 1.3.6.1.4.1.9.10.73.1.1.13 | cSpMtp3T02 | 1 | 1 | Waiting for changeover acknowledgement. |
| 1.3.6.1.4.1.9.10.73.1.1.14 | cSpMtp3T03 | 1 | 1 | Time controlled diversion-delay to avoid mis-sequencing on change back. |
| 1.3.6.1.4.1.9.10.73.1.1.15 | cSpMtp3T04 | 1 | 1 | Waiting for change back acknowledgement (first attempt). |
| 1.3.6.1.4.1.9.10.73.1.1.16 | cSpMtp3T05 | 1 | 1 | Waiting for change back acknowledgement (second attempt). |
| 1.3.6.1.4.1.9.10.73.1.1.17 | cSpMtp3T06 | 1 | 1 | Delay to avoid message mis-sequencing on controlled rerouting. |
| 1.3.6.1.4.1.9.10.73.1.1.18 | cSpMtp3T07 | 1 | 1 | Waiting for signalling data link connection acknowledgement. |
| 1.3.6.1.4.1.9.10.73.1.1.19 | cSpMtp3T08 | 1 | 1 | Transfer prohibited inhibition timer (transient solution). |
| 1.3.6.1.4.1.9.10.73.1.1.20 | cSpMtp3T10 | 1 | 1 | Waiting to repeat signalling routeset test message. |
| 1.3.6.1.4.1.9.10.73.1.1.21 | cSpMtp3T11 | 1 | 1 | Transfer restricted timer. (This is one way of implementing the function described in 13.4/Q.704 and mainly intended to simplify … |
| 1.3.6.1.4.1.9.10.73.1.1.22 | cSpMtp3T12 | 1 | 1 | Waiting for uninhibit acknowledgement. |
| 1.3.6.1.4.1.9.10.73.1.1.23 | cSpMtp3T13 | 1 | 1 | Waiting for force uninhibit. |
| 1.3.6.1.4.1.9.10.73.1.1.24 | cSpMtp3T14 | 1 | 1 | Waiting for inhibition acknowledgement. |
| 1.3.6.1.4.1.9.10.73.1.1.25 | cSpMtp3T15 | 1 | 1 | Waiting to start signalling routeset congestion test. |
| 1.3.6.1.4.1.9.10.73.1.1.26 | cSpMtp3T16 | 1 | 1 | Waiting for routeset congestion status update. |
| 1.3.6.1.4.1.9.10.73.1.1.27 | cSpMtp3T17 | 1 | 1 | Delay to avoid oscillation of initial alignment failure and link restart. |
| 1.3.6.1.4.1.9.10.73.1.1.28 | cSpMtp3T18 | 1 | 1 | Timer within a signalling point whose MTP restarts, for supervising link and linkset activation as well as the receipt of routing… |
| 1.3.6.1.4.1.9.10.73.1.1.29 | cSpMtp3T19 | 1 | 1 | Supervision timer during MTP restart to avoid possible ping-pong of TFP, TFR2) and TRA messages. |
| 1.3.6.1.4.1.9.10.73.1.1.30 | cSpMtp3T20 | 1 | 1 | Overall MTP restart timer at the signalling point whose MTP restarts. Overall MTP restart timer at a signalling point adjacent to… |
| 1.3.6.1.4.1.9.10.73.1.1.31 | cSpMtp3T21 | 1 | 1 | Overall MTP restart timer at a signalling point adjacent to one whose MTP restarts. |
| 1.3.6.1.4.1.9.10.73.1.1.32 | cSpMtp3T22 | 1 | 1 | Local inhibit test timer. |
| 1.3.6.1.4.1.9.10.73.1.1.33 | cSpMtp3T23 | 1 | 1 | Remote inhibit test timer. |
| 1.3.6.1.4.1.9.10.73.1.1.34 | cSpMtp3T24 | 1 | 1 | Stabilizing timer after removal of local processor outage, used in LPO latching to RPO (national option) |
| 1.3.6.1.4.1.9.10.73.1.1.35 | cSpMtp3T25 | 1 | 1 | Timer at Signalling Point (SP) adjacent to restarting SP, waiting for traffic restart allowed message. |
| 1.3.6.1.4.1.9.10.73.1.1.36 | cSpMtp3T26 | 1 | 1 | Timer at restarting SP waiting to repeat traffic restart waiting message. |
| 1.3.6.1.4.1.9.10.73.1.1.37 | cSpMtp3T27 | 1 | 1 | Minimum duration of unavailability for full restart. |
| 1.3.6.1.4.1.9.10.73.1.1.38 | cSpMtp3T28 | 1 | 1 | Timer at SP adjacent to restarting SP waiting for traffic restart waiting message. |
| 1.3.6.1.4.1.9.10.73.1.1.39 | cSpMtp3T29 | 1 | 1 | Timer started when TRA sent in response to unexpected TRA or TRW. |
| 1.3.6.1.4.1.9.10.73.1.1.40 | cSpMtp3T30 | 1 | 1 | Timer to limit sending of TFPs and TFRs in response to unexpected TRA or TRW. |
| 1.3.6.1.4.1.9.10.73.1.1.41 | cSpMtp3T31 | 1 | 1 | False link congestion detection timer. |
| 1.3.6.1.4.1.9.10.73.1.1.42 | cSpMtp3T32 | 1 | 1 | Link oscillation timer - Procedure A. |
| 1.3.6.1.4.1.9.10.73.1.1.43 | cSpMtp3T33 | 1 | 1 | Probation timer for link oscillation - Procedure B. |
| 1.3.6.1.4.1.9.10.73.1.1.44 | cSpMtp3T34 | 1 | 1 | Suspension timer for link oscillation - Procedure B. |