Reference record for OID 1.3.6.1.4.1.9.10.9.1.1.10.4



parent
1.3.6.1.4.1.9.10.9.1.1.10 (ciscoDlswTrapControl)
node code
4
node name
ciscoDlswTrapCntlCircuit
dot oid
1.3.6.1.4.1.9.10.9.1.1.10.4
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoExperiment(10) ciscoDlswMIB(9) ciscoDlswMIBObjects(1) ciscoDlswNode(1) ciscoDlswTrapControl(10) ciscoDlswTrapCntlCircuit(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoExperiment(10) ciscoDlswMIB(9) ciscoDlswMIBObjects(1) ciscoDlswNode(1) ciscoDlswTrapControl(10) ciscoDlswTrapCntlCircuit(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoExperiment(10) ciscoDlswMIB(9) ciscoDlswMIBObjects(1) ciscoDlswNode(1) ciscoDlswTrapControl(10) ciscoDlswTrapCntlCircuit(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoExperiment(10) ciscoDlswMIB(9) ciscoDlswMIBObjects(1) ciscoDlswNode(1) ciscoDlswTrapControl(10) ciscoDlswTrapCntlCircuit(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoExperiment(10) ciscoDlswMIB(9) ciscoDlswMIBObjects(1) ciscoDlswNode(1) ciscoDlswTrapControl(10) ciscoDlswTrapCntlCircuit(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoExperiment(10) ciscoDlswMIB(9) ciscoDlswMIBObjects(1) ciscoDlswNode(1) ciscoDlswTrapControl(10) ciscoDlswTrapCntlCircuit(4)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoExperiment/ciscoDlswMIB/ciscoDlswMIBObjects/ciscoDlswNode/ciscoDlswTrapControl/ciscoDlswTrapCntlCircuit
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoExperiment/ciscoDlswMIB/ciscoDlswMIBObjects/ciscoDlswNode/ciscoDlswTrapControl/ciscoDlswTrapCntlCircuit
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoExperiment/ciscoDlswMIB/ciscoDlswMIBObjects/ciscoDlswNode/ciscoDlswTrapControl/ciscoDlswTrapCntlCircuit
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoExperiment/ciscoDlswMIB/ciscoDlswMIBObjects/ciscoDlswNode/ciscoDlswTrapControl/ciscoDlswTrapCntlCircuit
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoExperiment/ciscoDlswMIB/ciscoDlswMIBObjects/ciscoDlswNode/ciscoDlswTrapControl/ciscoDlswTrapCntlCircuit
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoExperiment/ciscoDlswMIB/ciscoDlswMIBObjects/ciscoDlswNode/ciscoDlswTrapControl/ciscoDlswTrapCntlCircuit
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/10/9/1/1/10/4

    Description by circitor

    Indicates whether the DLSw is permitted to generate
    circuit up and down traps. With the value of `enabled'
    the DLSw will emit traps when circuits enter `connected'
    and `disconnected' states. With the value of `disabled'
    the DLSw will not emit traps when circuits enter of
    `connected' and `disconnected' states. With the value
    of `partial' the DLSw will emit traps only for those
    circuits that are initiated by this DLSw, e.g.,
    originating the CUR_CS message. The changes take effect
    immediately.

    Parsed from file CISCO-DLSW-MIB.mib
    Module: CISCO-DLSW-MIB

    Description by cisco_v1

    Indicates whether the DLSw is permitted to generate
    circuit up and down traps. With the value of `enabled'
    the DLSw will emit traps when circuits enter `connected'
    and `disconnected' states. With the value of `disabled'
    the DLSw will not emit traps when circuits enter of
    `connected' and `disconnected' states. With the value
    of `partial' the DLSw will emit traps only for those
    circuits that are initiated by this DLSw, e.g.,
    originating the CUR_CS message. The changes take effect
    immediately.

    Description by mibdepot

    Indicates whether the DLSw is permitted to generate
    circuit up and down traps. With the value of `enabled'
    the DLSw will emit traps when circuits enter `connected'
    and `disconnected' states. With the value of `disabled'
    the DLSw will not emit traps when circuits enter of
    `connected' and `disconnected' states. With the value
    of `partial' the DLSw will emit traps only for those
    circuits that are initiated by this DLSw, e.g.,
    originating the CUR_CS message. The changes take effect
    immediately.

    Parsed from file CISCO-DLSW-MIB.my.txt
    Company: None
    Module: CISCO-DLSW-MIB

    Description by cisco

    Indicates whether the DLSw is permitted to generate
    circuit up and down traps. With the value of `enabled'
    the DLSw will emit traps when circuits enter `connected'
    and `disconnected' states. With the value of `disabled'
    the DLSw will not emit traps when circuits enter of
    `connected' and `disconnected' states. With the value
    of `partial' the DLSw will emit traps only for those
    circuits that are initiated by this DLSw, e.g.,
    originating the CUR_CS message. The changes take effect
    immediately.

    Information by circitor

    ciscoDlswTrapCntlCircuit  OBJECT-TYPE
    SYNTAX     INTEGER {
        enabled     (1),
        disabled    (2),
        partial     (3)
    }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
       "Indicates whether the DLSw is permitted to generate
        circuit up and down traps.  With the value of `enabled'
        the DLSw will emit traps when circuits enter `connected'
        and `disconnected' states.  With the value of `disabled'
        the DLSw will not emit traps when circuits enter of
        `connected' and `disconnected' states.  With the value
        of `partial' the DLSw will emit traps only for those
        circuits that are initiated by this DLSw, e.g.,
        originating the CUR_CS message.  The changes take effect
        immediately."
    ::= { ciscoDlswTrapControl 4 }

    Information by cisco_v1

    ciscoDlswTrapCntlCircuit OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2),
        partial(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates whether the DLSw is permitted to generate
         circuit up and down traps.  With the value of `enabled'
         the DLSw will emit traps when circuits enter `connected'
         and `disconnected' states.  With the value of `disabled'
         the DLSw will not emit traps when circuits enter of
         `connected' and `disconnected' states.  With the value
         of `partial' the DLSw will emit traps only for those
         circuits that are initiated by this DLSw, e.g.,
         originating the CUR_CS message.  The changes take effect
         immediately."
    ::= { ciscoDlswTrapControl 4 }

    Information by oid_info

    Vendor: Cisco
    Module: CISCO-DLSW-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    ciscoDlswTrapCntlCircuit  OBJECT-TYPE
    SYNTAX     INTEGER {
        enabled     (1),
        disabled    (2),
        partial     (3)
    }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
       "Indicates whether the DLSw is permitted to generate
        circuit up and down traps.  With the value of `enabled'
        the DLSw will emit traps when circuits enter `connected'
        and `disconnected' states.  With the value of `disabled'
        the DLSw will not emit traps when circuits enter of
        `connected' and `disconnected' states.  With the value
        of `partial' the DLSw will emit traps only for those
        circuits that are initiated by this DLSw, e.g.,
        originating the CUR_CS message.  The changes take effect
        immediately."
    ::= { ciscoDlswTrapControl 4 }

    Information by cisco

    ciscoDlswTrapCntlCircuit  OBJECT-TYPE
    SYNTAX     INTEGER {
        enabled     (1),
        disabled    (2),
        partial     (3)
    }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
       "Indicates whether the DLSw is permitted to generate
        circuit up and down traps.  With the value of `enabled'
        the DLSw will emit traps when circuits enter `connected'
        and `disconnected' states.  With the value of `disabled'
        the DLSw will not emit traps when circuits enter of
        `connected' and `disconnected' states.  With the value
        of `partial' the DLSw will emit traps only for those
        circuits that are initiated by this DLSw, e.g.,
        originating the CUR_CS message.  The changes take effect
        immediately."
    ::= { ciscoDlswTrapControl 4 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Children (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.10.9.1.1.10.4.0 ciscoDlswTrapCntlCircuit 0 0 None

    Brothers (3)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.10.9.1.1.10.1 ciscoDlswTrapCntlTConnPartnerReject 1 1 Indicates whether the DLSw is permitted to emit partner
    reject related traps. With the value of `enabled'
    the DLSw will emit all…
    1.3.6.1.4.1.9.10.9.1.1.10.2 ciscoDlswTrapCntlTConnProtViolation 1 1 Indicates whether the DLSw is permitted to generate
    protocol-violation traps on the events such as
    window size violation. The ch…
    1.3.6.1.4.1.9.10.9.1.1.10.3 ciscoDlswTrapCntlTConn 1 1 Indicates whether the DLSw is permitted to emit transport
    connection up and down traps. With the value of `enabled'
    the DLSw wil…