The location of End Station 2 (S2).
If the location of End Station 2 is local, the
interface information will be available in the
conceptual row whose S1 and S2 are the S2 and
the S1 of this conceptual row, respectively.
Parsed from file CISCO-DLSW-MIB.mib
Module: CISCO-DLSW-MIB
The location of End Station 2 (S2).
If the location of End Station 2 is local, the
interface information will be available in the
conceptual row whose S1 and S2 are the S2 and
the S1 of this conceptual row, respectively.
The location of End Station 2 (S2).
If the location of End Station 2 is local, the
interface information will be available in the
conceptual row whose S1 and S2 are the S2 and
the S1 of this conceptual row, respectively.
Parsed from file CISCO-DLSW-MIB.my.txt
Company: None
Module: CISCO-DLSW-MIB
The location of End Station 2 (S2).
If the location of End Station 2 is local, the
interface information will be available in the
conceptual row whose S1 and S2 are the S2 and
the S1 of this conceptual row, respectively.
ciscoDlswCircuitS2Location OBJECT-TYPE SYNTAX EndStationLocation MAX-ACCESS read-only STATUS current DESCRIPTION "The location of End Station 2 (S2). If the location of End Station 2 is local, the interface information will be available in the conceptual row whose S1 and S2 are the S2 and the S1 of this conceptual row, respectively." ::= { ciscoDlswCircuitEntry 10 }
ciscoDlswCircuitS2Location OBJECT-TYPE SYNTAX EndStationLocation ACCESS read-only STATUS mandatory DESCRIPTION "The location of End Station 2 (S2). If the location of End Station 2 is local, the interface information will be available in the conceptual row whose S1 and S2 are the S2 and the S1 of this conceptual row, respectively." ::= { ciscoDlswCircuitEntry 10 }
Vendor: Cisco
Module: CISCO-DLSW-MIB
[Automatically extracted from oidview.com]
ciscoDlswCircuitS2Location OBJECT-TYPE SYNTAX EndStationLocation MAX-ACCESS read-only STATUS current DESCRIPTION "The location of End Station 2 (S2). If the location of End Station 2 is local, the interface information will be available in the conceptual row whose S1 and S2 are the S2 and the S1 of this conceptual row, respectively." ::= { ciscoDlswCircuitEntry 10 }
ciscoDlswCircuitS2Location OBJECT-TYPE SYNTAX EndStationLocation MAX-ACCESS read-only STATUS current DESCRIPTION "The location of End Station 2 (S2). If the location of End Station 2 is local, the interface information will be available in the conceptual row whose S1 and S2 are the S2 and the S1 of this conceptual row, respectively." ::= { ciscoDlswCircuitEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.9.1.5.2.1.1 | ciscoDlswCircuitS1Mac | 0 | 0 | The MAC Address of End Station 1 (S1) used for this circuit. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.2 | ciscoDlswCircuitS1Sap | 0 | 0 | The SAP at End Station 1 (S1) used for this circuit. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.3 | ciscoDlswCircuitS1IfIndex | 0 | 0 | The IfEntry index of the local interface through which S1 can be reached. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.4 | ciscoDlswCircuitS1DlcType | 0 | 0 | The DLC protocol in use between the DLSw node and S1. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.5 | ciscoDlswCircuitS1RouteInfo | 0 | 0 | If source-route bridging is in use between the DLSw node and S1, this is the routing information field describing the path betwee… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.6 | ciscoDlswCircuitS1CircuitId | 0 | 0 | The Circuit ID assigned by this DLSw node to this circuit. The first four octets are the DLC port Id, and the second four octets … |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.7 | ciscoDlswCircuitS1Dlc | 0 | 0 | Points to a conceptual row of the underlying DLC MIB, which could either be the standard SDLC or LLC MIBs, or an enterprise-speci… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.8 | ciscoDlswCircuitS2Mac | 0 | 0 | The MAC Address of End Station 2 (S2) used for this circuit. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.9 | ciscoDlswCircuitS2Sap | 0 | 0 | The SAP at End Station 2 (S2) used for this circuit. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.11 | ciscoDlswCircuitS2TDomain | 0 | 0 | If the location of End Station 2 is remote, this value is the transport domain of the transport protocol the circuit is running ov… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.12 | ciscoDlswCircuitS2TAddress | 0 | 0 | If the location of End Station 2 is remote, this object contains the address of the partner DLSw, else it will be an OCTET STRING… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.13 | ciscoDlswCircuitS2CircuitId | 0 | 0 | The Circuit ID assigned to this circuit by the partner DLSw node. The first four octets are the DLC port Id, and the second four… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.14 | ciscoDlswCircuitOrigin | 0 | 0 | This object specifies which of the two end stations initiated the establishment of this circuit. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.15 | ciscoDlswCircuitEntryTime | 0 | 0 | The value of ciscoDlswUpTime when this circuit table conceptual row was created. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.16 | ciscoDlswCircuitStateTime | 0 | 0 | The value of ciscoDlswUpTime when this circuit entered the current state. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.17 | ciscoDlswCircuitState | 0 | 0 | The current state of this circuit. The implementation may choose to keep entries for some period of time after circuit disconnec… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.18 | ciscoDlswCircuitPriority | 0 | 0 | The transmission priority of this circuit as understood by this DLSw node. This value is determined by the two DLSw nodes at cir… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.19 | ciscoDlswCircuitFCSendGrantedUnits | 0 | 0 | The number of paced SSP messages that this DLSw is currently authorized to send on this circuit before it must stop and wait for … |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.20 | ciscoDlswCircuitFCSendCurrentWndw | 0 | 0 | The current window size that this DLSw is using in its role as a data sender. This is the value by which this DLSw would increas… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.21 | ciscoDlswCircuitFCRecvGrantedUnits | 0 | 0 | The current number of paced SSP messages that this DLSw has authorized the partner DLSw to send on this circuit before the partne… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.22 | ciscoDlswCircuitFCRecvCurrentWndw | 0 | 0 | The current window size that this DLSw is using in its role as a data receiver. This is the number of additional paced SSP messa… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.23 | ciscoDlswCircuitFCLargestRecvGranted | 0 | 0 | The largest receive window size granted by this DLSw during the current activation of this circuit. This is not the largest numb… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.24 | ciscoDlswCircuitFCLargestSendGranted | 0 | 0 | The largest send (with respect to this DLSw) window size granted by the partner DLSw during the current activation of this circui… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.25 | ciscoDlswCircuitFCHalveWndwSents | 0 | 0 | The number of Halve Window operations this DLSw has sent on this circuit, in its role as a data receiver. The value zero should … |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.26 | ciscoDlswCircuitFCResetOpSents | 0 | 0 | The number of Reset Window operations this DLSw has sent on this circuit, in its role as a data receiver. The value zero should … |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.27 | ciscoDlswCircuitFCHalveWndwRcvds | 0 | 0 | The number of Halve Window operations this DLSw has received on this circuit, in its role as a data sender. The value zero shoul… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.28 | ciscoDlswCircuitFCResetOpRcvds | 0 | 0 | The number of Reset Window operations this DLSw has received on this circuit, in its role as a data sender. The value zero shoul… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.29 | ciscoDlswCircuitDiscReasonLocal | 0 | 0 | The reason why this circuit was last disconnected, as seen by this DLSw node. This object is present only if the implementation … |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.30 | ciscoDlswCircuitDiscReasonRemote | 0 | 0 | The generic reason code why this circuit was last disconnected, as reported by the DLSw partner in a HALT_DL or HALT_DL_NOACK. If… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.31 | ciscoDlswCircuitDiscReasonRemoteData | 0 | 0 | Implementation-specific data reported by the DLSw partner in a HALT_DL or HALT_DL_NOACK, to help specify how and why this circuit… |