Indicates the number of interfaces currently being protected
by the FRR feature if mplsFrrConstProtectionMethod is set to
facilityBackup(1), otherwise this value should return 0 to
indicate that LSPs traversing any interface may be protected.
This value MUST be less than or equal to mplsFrrConfIfs.
Parsed from file CISCO-IETF-FRR-MIB.mib
Module: CISCO-IETF-FRR-MIB
Indicates the number of interfaces currently being protected
by the FRR feature if mplsFrrConstProtectionMethod is set to
facilityBackup(1), otherwise this value should return 0 to
indicate that LSPs traversing any interface may be protected.
This value MUST be less than or equal to mplsFrrConfIfs.
Indicates the number of interfaces currently being protected
by the FRR feature if mplsFrrConstProtectionMethod is set to
facilityBackup(1), otherwise this value should return 0 to
indicate that LSPs traversing any interface may be protected.
This value MUST be less than or equal to mplsFrrConfIfs.
Parsed from file CISCO-IETF-FRR-MIB.my.txt
Company: None
Module: CISCO-IETF-FRR-MIB
Indicates the number of interfaces currently being protected
by the FRR feature if mplsFrrConstProtectionMethod is set to
facilityBackup(1), otherwise this value should return 0 to
indicate that LSPs traversing any interface may be protected.
This value MUST be less than or equal to mplsFrrConfIfs.
cmplsFrrActProtectedIfs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of interfaces currently being protected by the FRR feature if mplsFrrConstProtectionMethod is set to facilityBackup(1), otherwise this value should return 0 to indicate that LSPs traversing any interface may be protected. This value MUST be less than or equal to mplsFrrConfIfs." DEFVAL { 0 } ::= { cmplsFrrScalars 6 }
cmplsFrrActProtectedIfs OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of interfaces currently being protected by the FRR feature if mplsFrrConstProtectionMethod is set to facilityBackup(1), otherwise this value should return 0 to indicate that LSPs traversing any interface may be protected. This value MUST be less than or equal to mplsFrrConfIfs." DEFVAL { 0 } ::= { cmplsFrrScalars 6 }
Vendor: Cisco
Module: CISCO-IETF-FRR-MIB
[Automatically extracted from oidview.com]
cmplsFrrActProtectedIfs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of interfaces currently being protected by the FRR feature if mplsFrrConstProtectionMethod is set to facilityBackup(1), otherwise this value should return 0 to indicate that LSPs traversing any interface may be protected. This value MUST be less than or equal to mplsFrrConfIfs." DEFVAL { 0 } ::= { cmplsFrrScalars 6 }
cmplsFrrActProtectedIfs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of interfaces currently being protected by the FRR feature if mplsFrrConstProtectionMethod is set to facilityBackup(1), otherwise this value should return 0 to indicate that LSPs traversing any interface may be protected. This value MUST be less than or equal to mplsFrrConfIfs." DEFVAL { 0 } ::= { cmplsFrrScalars 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.98.1.6.0 | cmplsFrrActProtectedIfs | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.98.1.1 | cmplsFrrDetourIncoming | 1 | 1 | The number of detour LSPs entering the device if mplsFrrConstProtectionMethod is set to oneToOneBackup(0), or or 0 if mplsFrrCons… |
| 1.3.6.1.4.1.9.10.98.1.2 | cmplsFrrDetourOutgoing | 1 | 1 | The number of detour LSPs leaving the device if mplsFrrConstProtectionMethod is set to oneToOneBackup(0), or 0 if mplsFrrConstPro… |
| 1.3.6.1.4.1.9.10.98.1.3 | cmplsFrrDetourOriginating | 1 | 1 | The number of detour LSPs originating at this PLR if mplsFrrConstProtectionMethod is set to oneToOneBackup(0). This object MUST r… |
| 1.3.6.1.4.1.9.10.98.1.4 | cmplsFrrSwitchover | 1 | 1 | The number of tunnel instances that are switched over to their corresponding detour LSP if mplsFrrConstProtectionMethod is set to… |
| 1.3.6.1.4.1.9.10.98.1.5 | cmplsFrrNumOfConfIfs | 1 | 1 | Indicates the number of MPLS interfaces configured for protection by the FRR feature, otherwise this value MUST return 0 to indic… |
| 1.3.6.1.4.1.9.10.98.1.7 | cmplsFrrConfProtectingTuns | 1 | 1 | Indicates the number of bypass tunnels configured to protect facilities on this LSR using the FRR feature if mplsFrrConstProtecti… |
| 1.3.6.1.4.1.9.10.98.1.8 | cmplsFrrActProtectedTuns | 1 | 1 | Indicates the number of bypass tunnels indicated in mplsFrrConfProtectingTuns whose operStatus is up(1) indicating that they are … |
| 1.3.6.1.4.1.9.10.98.1.9 | cmplsFrrActProtectedLSPs | 1 | 1 | Indicates the number of LSPs currently protected by the FRR feature. If mplsFrrConstProtectionMethod is set to facilityBackup(1)t… |
| 1.3.6.1.4.1.9.10.98.1.10 | cmplsFrrConstProtectionMethod | 1 | 1 | Indicates which protection method is to be used for fast reroute. Some devices may require a reboot of their routing processors i… |
| 1.3.6.1.4.1.9.10.98.1.11 | cmplsFrrNotifsEnabled | 1 | 1 | Enables or disables FRR notifications defined in this MIB module. Notifications are disabled by default. |
| 1.3.6.1.4.1.9.10.98.1.12 | cmplsFrrLogTableMaxEntries | 1 | 1 | Indicates the maximum number of entries allowed in the FRR Log table. Agents receiving SETs for values that cannot be used must r… |
| 1.3.6.1.4.1.9.10.98.1.13 | cmplsFrrLogTableCurrEntries | 1 | 1 | Indicates the current number of entries in the FRR log table. |
| 1.3.6.1.4.1.9.10.98.1.14 | cmplsFrrNotifMaxRate | 1 | 1 | This variable indicates the number of milliseconds that must elapse between notification emissions. If events occur more rapidly,… |