Entry which tells if Cat5000 should act as a
Broadcast client or not.
Parsed from file CISCO-STACK-MIB.mib
Module: CISCO-STACK-MIB
Entry which tells if Cat5000 should act as a
Broadcast client or not.
ntpBcastClient OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Entry which tells if Cat5000 should act as a Broadcast
client or not."
DEFVAL { disabled }
View at oid-info.com
Entry which tells if Cat5000 should act as a
Broadcast client or not.
Parsed from file cisco-stack-mib.mib.txt
Company: None
Module: CISCO-STACK-MIB
Entry which tells if Cat5000 should act as a
Broadcast client or not.
ntpBcastClient OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Entry which tells if Cat5000 should act as a Broadcast client or not." DEFVAL { disabled } ::= { ntpGrp 1 }
ntpBcastClient OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Entry which tells if Cat5000 should act as a Broadcast client or not." DEFVAL { disabled } ::= { ntpGrp 1 }
Automatically extracted from Cisco "SNMP v2 MIBs".
ntpBcastClient OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Entry which tells if Cat5000 should act as a Broadcast client or not." DEFVAL { disabled } ::= { ntpGrp 1 }
ntpBcastClient OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Entry which tells if Cat5000 should act as a Broadcast client or not." DEFVAL { disabled } ::= { ntpGrp 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.5.1.15.1.0 | ntpBcastClient | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.5.1.15.2 | ntpBcastDelay | 1 | 1 | Estimated Round trip time (in micro seconds) for NTP broadcasts. The range is from 1 to 999999. |
| 1.3.6.1.4.1.9.5.1.15.3 | ntpClient | 1 | 1 | Entry which tells if the device can act as a NTP client (in a client-server configuration type). |
| 1.3.6.1.4.1.9.5.1.15.4 | ntpServerTable | 1 | 4 | A list of NTP Server entries. This table lists a maximum of 10 Entries. |
| 1.3.6.1.4.1.9.5.1.15.5 | ntpSummertimeStatus | 1 | 1 | Enabling or Disabling will set the clock ahead or behind 1 hour respectively.(daylight savings time in USA). This command gets ac… |
| 1.3.6.1.4.1.9.5.1.15.6 | ntpSummerTimezoneName | 1 | 1 | Summertime time zone name for display purposes. |
| 1.3.6.1.4.1.9.5.1.15.7 | ntpTimezoneName | 1 | 1 | Time zone name for display purposes. |
| 1.3.6.1.4.1.9.5.1.15.8 | ntpTimezoneOffsetHour | 1 | 1 | Time offset (Hour) from Greenwich Mean Time. |
| 1.3.6.1.4.1.9.5.1.15.9 | ntpTimezoneOffsetMinute | 1 | 1 | Time offset (Minutes) from Greenwich Mean Time. |
| 1.3.6.1.4.1.9.5.1.15.10 | ntpAuthenticationEnable | 1 | 1 | Specifies if authentication feature is enabled or disabled in the system. |
| 1.3.6.1.4.1.9.5.1.15.11 | ntpAuthenticationTable | 1 | 5 | A list of NTP Authentication Key entries. This table lists a maximum of 10 Entries |