This object specifies the minimum threshold value in percentage
of free space for each partition. If the free space available
goes below this threshold value and if
ciscoFlashPartionLowSpaceNotifEnable is set to true,
ciscoFlashPartitionLowSpaceNotif will be generated. When the
available free space comes back to the threshold value
ciscoFlashPartionLowSpaceRecoveryNotif will be generated.
This object specifies the minimum threshold value in percentage
of free space for each partition. If the free space available
goes below this threshold value and if
ciscoFlashPartionLowSpaceNotifEnable is set to true,
ciscoFlashPartitionLowSpaceNotif will be generated. When the
available free space comes back to the threshold value
ciscoFlashPartionLowSpaceRecoveryNotif will be generated.
ciscoFlashPartitionLowSpaceNotifThreshold OBJECT-TYPE SYNTAX Percent ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the minimum threshold value in percentage of free space for each partition. If the free space available goes below this threshold value and if ciscoFlashPartionLowSpaceNotifEnable is set to true, ciscoFlashPartitionLowSpaceNotif will be generated. When the available free space comes back to the threshold value ciscoFlashPartionLowSpaceRecoveryNotif will be generated." ::= { ciscoFlashPartitionEntry 15 }
ciscoFlashPartitionLowSpaceNotifThreshold OBJECT-TYPE SYNTAX Percent MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the minimum threshold value in percentage of free space for each partition. If the free space available goes below this threshold value and if ciscoFlashPartionLowSpaceNotifEnable is set to true, ciscoFlashPartitionLowSpaceNotif will be generated. When the available free space comes back to the threshold value ciscoFlashPartionLowSpaceRecoveryNotif will be generated." ::= { ciscoFlashPartitionEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.1 | ciscoFlashPartitionIndex | 0 | 0 | Flash partition sequence number used to index within table of initialized flash partitions. |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.2 | ciscoFlashPartitionStartChip | 0 | 0 | Chip sequence number of first chip in partition. Used as an index into the chip table. |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.3 | ciscoFlashPartitionEndChip | 0 | 0 | Chip sequence number of last chip in partition. Used as an index into the chip table. |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.4 | ciscoFlashPartitionSize | 0 | 0 | Flash partition size. It should be an integral multiple of ciscoFlashDeviceMinPartitionSize. If there is a single partition, this… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.5 | ciscoFlashPartitionFreeSpace | 0 | 0 | Free space within a Flash partition. Note that the actual size of a file in Flash includes a small overhead that represents the f… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.6 | ciscoFlashPartitionFileCount | 0 | 0 | Count of all files in a flash partition. Both good and bad (deleted or invalid checksum) files will be included in this count. |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.7 | ciscoFlashPartitionChecksumAlgorithm | 0 | 0 | Checksum algorithm identifier for checksum method used by the file system. Normally, this would be fixed for a particular file sy… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.8 | ciscoFlashPartitionStatus | 0 | 0 | Flash partition status can be : * readOnly if device is not programmable either because chips could not be recognized or an erron… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.9 | ciscoFlashPartitionUpgradeMethod | 0 | 0 | Flash partition upgrade method, ie., method by which new files can be downloaded into the partition. FLH stands for Flash Load He… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.10 | ciscoFlashPartitionName | 0 | 0 | Flash partition name used to refer to a partition by the system. This can be any alpha-numeric character string of the form AAAAA… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.11 | ciscoFlashPartitionNeedErasure | 0 | 0 | This object indicates whether a partition requires erasure before any write operations can be done in it. A management station sh… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.12 | ciscoFlashPartitionFileNameLength | 0 | 0 | Maximum file name length supported by the file system. Max file name length will depend on the file system implemented. Today, all… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.13 | ciscoFlashPartitionSizeExtended | 0 | 0 | Flash partition size. It should be an integral multiple of ciscoFlashDeviceMinPartitionSize. If there is a single partition, this… |
| 1.3.6.1.4.1.9.9.10.1.1.4.1.1.14 | ciscoFlashPartitionFreeSpaceExtended | 0 | 0 | Free space within a Flash partition. Note that the actual size of a file in Flash includes a small overhead that represents the f… |