The Dynamic Shared Secret feature can operate in three
different modes, depending on what action should be taken
for cable modems that fail the CMTS MIC verification check:
notConfigured(1): It indicates that the DMIC is not
configured for this cable interface.
mark(2): By default, the Dynamic Shared Secret feature
is enabled on all cable interfaces using the
mark option. In this mode, the CMTS allows
cable modems to come online even if they fail
the CMTS MIC validity check. However, for
this modem cdxCmtsCmStatusDMICMode will
be labeled as marked.
lock(3): When the lock option is used, the CMTS assigns
a restrictive QoS configuration to CMs that
fail the MIC validity check twice in a row. A
particular QoS profile to be used for locked
cable modems can be specified by setting
cdxCmtsCmDMICLockQos.
If a customer resets their CM, the CM will
reregister but still uses the restricted QoS
profile. A locked CM continues with the
restricted QoS profile until it goes offline
and remains offline for at least 24 hours, at
which point it is allowed to reregister with a
valid DOCSIS configuration file. A system
operator can manually clear the lock on a CM by
setting cdxCmtsCmStatusDMICUnLock object.
reject(4): In the reject mode, the CMTS refuses to allow
CMs to come online if they fail the CMTS MIC
validity check.
Parsed from file CISCO-DOCS-EXT-MIB.mib
Module: CISCO-DOCS-EXT-MIB
The Dynamic Shared Secret feature can operate in three
different modes, depending on what action should be taken
for cable modems that fail the CMTS MIC verification check:
notConfigured(1): It indicates that the DMIC is not
configured for this cable interface.
mark(2): By default, the Dynamic Shared Secret feature
is enabled on all cable interfaces using the
mark option. In this mode, the CMTS allows
cable modems to come online even if they fail
the CMTS MIC validity check. However, for
this modem cdxCmtsCmStatusDMICMode will
be labeled as marked.
lock(3): When the lock option is used, the CMTS assigns
a restrictive QoS configuration to CMs that
fail the MIC validity check twice in a row. A
particular QoS profile to be used for locked
cable modems can be specified by setting
cdxCmtsCmDMICLockQos.
If a customer resets their CM, the CM will
reregister but still uses the restricted QoS
profile. A locked CM continues with the
restricted QoS profile until it goes offline
and remains offline for at least 24 hours, at
which point it is allowed to reregister with a
valid DOCSIS configuration file. A system
operator can manually clear the lock on a CM by
setting cdxCmtsCmStatusDMICUnLock object.
reject(4): In the reject mode, the CMTS refuses to allow
CMs to come online if they fail the CMTS MIC
validity check.
The Dynamic Shared Secret feature can operate in three
different modes, depending on what action should be taken
for cable modems that fail the CMTS MIC verification check:
notConfigured(1): It indicates that the DMIC is not
configured for this cable interface.
mark(2): By default, the Dynamic Shared Secret feature
is enabled on all cable interfaces using the
mark option. In this mode, the CMTS allows
cable modems to come online even if they fail
the CMTS MIC validity check. However, for
this modem cdxCmtsCmStatusDMICMode will
be labeled as marked.
lock(3): When the lock option is used, the CMTS assigns
a restrictive QoS configuration to CMs that
fail the MIC validity check twice in a row. A
particular QoS profile to be used for locked
cable modems can be specified by setting
cdxCmtsCmDMICLockQos.
If a customer resets their CM, the CM will
reregister but still uses the restricted QoS
profile. A locked CM continues with the
restricted QoS profile until it goes offline
and remains offline for at least 24 hours, at
which point it is allowed to reregister with a
valid DOCSIS configuration file. A system
operator can manually clear the lock on a CM by
setting cdxCmtsCmStatusDMICUnLock object.
reject(4): In the reject mode, the CMTS refuses to allow
CMs to come online if they fail the CMTS MIC
validity check.
Parsed from file CISCO-DOCS-EXT-MIB.my.txt
Company: None
Module: CISCO-DOCS-EXT-MIB
The Dynamic Shared Secret feature can operate in three
different modes, depending on what action should be taken
for cable modems that fail the CMTS MIC verification check:
notConfigured(1): It indicates that the DMIC is not
configured for this cable interface.
mark(2): By default, the Dynamic Shared Secret feature
is enabled on all cable interfaces using the
mark option. In this mode, the CMTS allows
cable modems to come online even if they fail
the CMTS MIC validity check. However, for
this modem cdxCmtsCmStatusDMICMode will
be labeled as marked.
lock(3): When the lock option is used, the CMTS assigns
a restrictive QoS configuration to CMs that
fail the MIC validity check twice in a row. A
particular QoS profile to be used for locked
cable modems can be specified by setting
cdxCmtsCmDMICLockQos.
If a customer resets their CM, the CM will
reregister but still uses the restricted QoS
profile. A locked CM continues with the
restricted QoS profile until it goes offline
and remains offline for at least 24 hours, at
which point it is allowed to reregister with a
valid DOCSIS configuration file. A system
operator can manually clear the lock on a CM by
setting cdxCmtsCmStatusDMICUnLock object.
reject(4): In the reject mode, the CMTS refuses to allow
CMs to come online if they fail the CMTS MIC
validity check.
cdxCmtsCmDMICMode OBJECT-TYPE SYNTAX INTEGER { notConfigured(1), mark(2), lock(3), reject(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Dynamic Shared Secret feature can operate in three different modes, depending on what action should be taken for cable modems that fail the CMTS MIC verification check: notConfigured(1): It indicates that the DMIC is not configured for this cable interface. mark(2): By default, the Dynamic Shared Secret feature is enabled on all cable interfaces using the mark option. In this mode, the CMTS allows cable modems to come online even if they fail the CMTS MIC validity check. However, for this modem cdxCmtsCmStatusDMICMode will be labeled as marked. lock(3): When the lock option is used, the CMTS assigns a restrictive QoS configuration to CMs that fail the MIC validity check twice in a row. A particular QoS profile to be used for locked cable modems can be specified by setting cdxCmtsCmDMICLockQos. If a customer resets their CM, the CM will reregister but still uses the restricted QoS profile. A locked CM continues with the restricted QoS profile until it goes offline and remains offline for at least 24 hours, at which point it is allowed to reregister with a valid DOCSIS configuration file. A system operator can manually clear the lock on a CM by setting cdxCmtsCmStatusDMICUnLock object. reject(4): In the reject mode, the CMTS refuses to allow CMs to come online if they fail the CMTS MIC validity check." DEFVAL { mark } ::= { cdxCmtsMacExtEntry 7 }
cdxCmtsCmDMICMode OBJECT-TYPE SYNTAX INTEGER { notConfigured(1), mark(2), lock(3), reject(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The Dynamic Shared Secret feature can operate in three different modes, depending on what action should be taken for cable modems that fail the CMTS MIC verification check: notConfigured(1): It indicates that the DMIC is not configured for this cable interface. mark(2): By default, the Dynamic Shared Secret feature is enabled on all cable interfaces using the mark option. In this mode, the CMTS allows cable modems to come online even if they fail the CMTS MIC validity check. However, for this modem cdxCmtsCmStatusDMICMode will be labeled as marked. lock(3): When the lock option is used, the CMTS assigns a restrictive QoS configuration to CMs that fail the MIC validity check twice in a row. A particular QoS profile to be used for locked cable modems can be specified by setting cdxCmtsCmDMICLockQos. If a customer resets their CM, the CM will reregister but still uses the restricted QoS profile. A locked CM continues with the restricted QoS profile until it goes offline and remains offline for at least 24 hours, at which point it is allowed to reregister with a valid DOCSIS configuration file. A system operator can manually clear the lock on a CM by setting cdxCmtsCmStatusDMICUnLock object. reject(4): In the reject mode, the CMTS refuses to allow CMs to come online if they fail the CMTS MIC validity check." DEFVAL { mark } ::= { cdxCmtsMacExtEntry 7 }
Vendor: Cisco
Module: CISCO-DOCS-EXT-MIB
[Automatically extracted from oidview.com]
cdxCmtsCmDMICMode OBJECT-TYPE SYNTAX INTEGER { notConfigured(1), mark(2), lock(3), reject(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Dynamic Shared Secret feature can operate in three different modes, depending on what action should be taken for cable modems that fail the CMTS MIC verification check: notConfigured(1): It indicates that the DMIC is not configured for this cable interface. mark(2): By default, the Dynamic Shared Secret feature is enabled on all cable interfaces using the mark option. In this mode, the CMTS allows cable modems to come online even if they fail the CMTS MIC validity check. However, for this modem cdxCmtsCmStatusDMICMode will be labeled as marked. lock(3): When the lock option is used, the CMTS assigns a restrictive QoS configuration to CMs that fail the MIC validity check twice in a row. A particular QoS profile to be used for locked cable modems can be specified by setting cdxCmtsCmDMICLockQos. If a customer resets their CM, the CM will reregister but still uses the restricted QoS profile. A locked CM continues with the restricted QoS profile until it goes offline and remains offline for at least 24 hours, at which point it is allowed to reregister with a valid DOCSIS configuration file. A system operator can manually clear the lock on a CM by setting cdxCmtsCmStatusDMICUnLock object. reject(4): In the reject mode, the CMTS refuses to allow CMs to come online if they fail the CMTS MIC validity check." DEFVAL { mark } ::= { cdxCmtsMacExtEntry 7 }
cdxCmtsCmDMICMode OBJECT-TYPE SYNTAX INTEGER { notConfigured(1), mark(2), lock(3), reject(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Dynamic Shared Secret feature can operate in three different modes, depending on what action should be taken for cable modems that fail the CMTS MIC verification check: notConfigured(1): It indicates that the DMIC is not configured for this cable interface. mark(2): By default, the Dynamic Shared Secret feature is enabled on all cable interfaces using the mark option. In this mode, the CMTS allows cable modems to come online even if they fail the CMTS MIC validity check. However, for this modem cdxCmtsCmStatusDMICMode will be labeled as marked. lock(3): When the lock option is used, the CMTS assigns a restrictive QoS configuration to CMs that fail the MIC validity check twice in a row. A particular QoS profile to be used for locked cable modems can be specified by setting cdxCmtsCmDMICLockQos. If a customer resets their CM, the CM will reregister but still uses the restricted QoS profile. A locked CM continues with the restricted QoS profile until it goes offline and remains offline for at least 24 hours, at which point it is allowed to reregister with a valid DOCSIS configuration file. A system operator can manually clear the lock on a CM by setting cdxCmtsCmStatusDMICUnLock object. reject(4): In the reject mode, the CMTS refuses to allow CMs to come online if they fail the CMTS MIC validity check." DEFVAL { mark } ::= { cdxCmtsMacExtEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.116.1.3.3.1.1 | cdxCmtsCmOnOffTrapEnable | 0 | 0 | cdxCmtsCmOnOfftrapEnable |
1.3.6.1.4.1.9.9.116.1.3.3.1.2 | cdxCmtsCmOnOffTrapInterval | 0 | 0 | cdxCmtsCmOnOfftrapInterval |
1.3.6.1.4.1.9.9.116.1.3.3.1.3 | cdxCmtsCmDefaultMaxCpes | 0 | 0 | The default maximum number of permitted CPEs per modem in this cable interface. A modem can override this value by setting the ob… |
1.3.6.1.4.1.9.9.116.1.3.3.1.4 | cdxCmtsCmTotal | 0 | 0 | The total count of cable modems on this cable mac interface since boot. |
1.3.6.1.4.1.9.9.116.1.3.3.1.5 | cdxCmtsCmActive | 0 | 0 | The count of cable modems that are active. Active cable modems are recognized by the cdxCmtsCmStatusValue other than offline(1). |
1.3.6.1.4.1.9.9.116.1.3.3.1.6 | cdxCmtsCmRegistered | 0 | 0 | The count of cable modems that are registered and online on this cable mac interface. Registered cable modems are those with one … |
1.3.6.1.4.1.9.9.116.1.3.3.1.8 | cdxCmtsCmDMICLockQos | 0 | 0 | If cdxCmtsCmDMICMode is set to lockingMode(3), this object would contain the restrictive QoS profile number as indicated by docsI… |