This object represents the mode used to transport DS0
Signalling information for T1 byteSynchronous mapping
(GR253).
In signallingTransferMode(2), the robbed-bit signalling
is transferred to the VT header. In clearMode(3), only
the framing bit is transferred to the VT header.
The initial value is signallingTransferMode(2)
if csTributaryMappingType is byteSynchronous.
For asynchronous mapping, it is
notApplicable(1).
The value notApplicable(1) can not be set.
Parsed from file CISCO-SONET-MIB.mib
Module: CISCO-SONET-MIB
This object represents the mode used to transport DS0
Signalling information for T1 byteSynchronous mapping
(GR253).
In signallingTransferMode(2), the robbed-bit signalling
is transferred to the VT header. In clearMode(3), only
the framing bit is transferred to the VT header.
The initial value is signallingTransferMode(2)
if csTributaryMappingType is byteSynchronous.
For asynchronous mapping, it is
notApplicable(1).
The value notApplicable(1) can not be set.
This object represents the mode used to transport DS0
Signalling information for T1 byteSynchronous mapping
(GR253).
In signallingTransferMode(2), the robbed-bit signalling
is transferred to the VT header. In clearMode(3), only
the framing bit is transferred to the VT header.
The initial value is signallingTransferMode(2)
if csTributaryMappingType is byteSynchronous.
For asynchronous mapping, it is
notApplicable(1).
The value notApplicable(1) can not be set.
Parsed from file CISCO-SONET-MIB.my.txt
Company: None
Module: CISCO-SONET-MIB
This object represents the mode used to transport DS0
Signalling information for T1 byteSynchronous mapping
(GR253).
In signallingTransferMode(2), the robbed-bit signalling
is transferred to the VT header. In clearMode(3), only
the framing bit is transferred to the VT header.
The initial value is signallingTransferMode(2)
if csTributaryMappingType is byteSynchronous.
For asynchronous mapping, it is
notApplicable(1).
The value notApplicable(1) can not be set.
cspSignallingTransportMode OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), signallingTransferMode(2), clearMode(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the mode used to transport DS0 Signalling information for T1 byteSynchronous mapping (GR253). In signallingTransferMode(2), the robbed-bit signalling is transferred to the VT header. In clearMode(3), only the framing bit is transferred to the VT header. The initial value is signallingTransferMode(2) if csTributaryMappingType is byteSynchronous. For asynchronous mapping, it is notApplicable(1). The value notApplicable(1) can not be set. " ::= { cspConfigEntry 3 }
cspSignallingTransportMode OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), signallingTransferMode(2), clearMode(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object represents the mode used to transport DS0 Signalling information for T1 byteSynchronous mapping (GR253). In signallingTransferMode(2), the robbed-bit signalling is transferred to the VT header. In clearMode(3), only the framing bit is transferred to the VT header. The initial value is signallingTransferMode(2) if csTributaryMappingType is byteSynchronous. For asynchronous mapping, it is notApplicable(1). The value notApplicable(1) can not be set." ::= { cspConfigEntry 3 }
Vendor: Cisco
Module: CISCO-SONET-MIB
[Automatically extracted from oidview.com]
cspSignallingTransportMode OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), signallingTransferMode(2), clearMode(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the mode used to transport DS0 Signalling information for T1 byteSynchronous mapping (GR253). In signallingTransferMode(2), the robbed-bit signalling is transferred to the VT header. In clearMode(3), only the framing bit is transferred to the VT header. The initial value is signallingTransferMode(2) if csTributaryMappingType is byteSynchronous. For asynchronous mapping, it is notApplicable(1). The value notApplicable(1) can not be set. " ::= { cspConfigEntry 3 }
cspSignallingTransportMode OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), signallingTransferMode(2), clearMode(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the mode used to transport DS0 Signalling information for T1 byteSynchronous mapping (GR253). In signallingTransferMode(2), the robbed-bit signalling is transferred to the VT header. In clearMode(3), only the framing bit is transferred to the VT header. The initial value is signallingTransferMode(2) if csTributaryMappingType is byteSynchronous. For asynchronous mapping, it is notApplicable(1). The value notApplicable(1) can not be set. " ::= { cspConfigEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.126.1.7.1.1.1 | cspSonetPathPayload | 0 | 0 | Specifies the payload carried by the SONET/SDH Path. The payload specification corresponds to C2 (Signal Label) overhead byte in … |
| 1.3.6.1.4.1.9.9.126.1.7.1.1.2 | cspTributaryMappingType | 0 | 0 | This object represents the VT/VC mapping type. asynchronous: In this mode, the channel structure of DS1/E1 is neither visible nor… |
| 1.3.6.1.4.1.9.9.126.1.7.1.1.4 | cspTributaryGroupingType | 0 | 0 | This object represents the method used to group VCs into an STM-1 signal. Applicable only to SDH. au3Grouping: STM1<-AU-3<-TUG-2<-TU-12<-VC12 or STM1<-AU-3<-TUG-2<-TU-11<-VC11. au4Groupin… |